From: Marek Vasut <marek.vasut@gmail.com>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-mmc@vger.kernel.org,
Marek Vasut <marek.vasut+renesas@gmail.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Simon Horman <horms+renesas@verge.net.au>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: renesas: salvator: Switch eMMC bus to 1V8
Date: Mon, 29 Oct 2018 09:01:29 +0100 [thread overview]
Message-ID: <f63a5c27-ea7d-e1f0-9bbb-211f56be8ad9@gmail.com> (raw)
In-Reply-To: <20181028213444.GA1096@kunai>
On 10/28/2018 10:34 PM, Wolfram Sang wrote:
> Hi Marek,
Hi,
> On Sat, Oct 27, 2018 at 06:34:10PM +0200, Marek Vasut wrote:
>> The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
>> array and the VCCQ supplies the bus. On this particular board, the VCC is
>> connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust
>> the pinmux to match the bus, which is always operating in 1.8V mode.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>
> Thanks for this!
>
> I think Olof (and thus, Simon ;)) will be happy if those two patches are
> merged.
Fine by me.
> Other than that, I think we should remove sdhi2_pins_uhs then because it
> is the same as sdhi2_pins. And then use later "pinctrl-1 =
> <&sdhi2_pins>;". So, basically the same phandles for both pinctrls. We
> can re-add the second one when we need it.
I wonder if removing the sdhi2_pins_uhs is what we want to do, given
that we might need to adjust TDSEL or pull resistor configurations for
the HS200/HS400 modes in the future.
Thoughts ?
>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>> Cc: Simon Horman <horms+renesas@verge.net.au>
>> Cc: Wolfram Sang <wsa@the-dreams.de>
>> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
>> Cc: linux-renesas-soc@vger.kernel.org
>> ---
>> arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
>> index 7d3d866a0063..d9a309b28fcf 100644
>> --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
>> +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
>> @@ -602,7 +602,7 @@
>> sdhi2_pins: sd2 {
>> groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
>> function = "sdhi2";
>> - power-source = <3300>;
>> + power-source = <1800>;
>> };
>>
>> sdhi2_pins_uhs: sd2_uhs {
>> --
>> 2.17.1
>>
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2018-10-29 16:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-27 16:34 [PATCH 1/2] arm64: dts: renesas: ulcb: Switch eMMC bus to 1V8 Marek Vasut
2018-10-27 16:34 ` [PATCH 2/2] arm64: dts: renesas: salvator: " Marek Vasut
2018-10-28 21:34 ` Wolfram Sang
2018-10-29 8:01 ` Marek Vasut [this message]
2018-10-29 8:57 ` Wolfram Sang
2018-10-31 12:46 ` Simon Horman
2018-10-31 13:03 ` Marek Vasut
2018-10-31 13:14 ` Wolfram Sang
2018-11-04 20:38 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f63a5c27-ea7d-e1f0-9bbb-211f56be8ad9@gmail.com \
--to=marek.vasut@gmail.com \
--cc=geert+renesas@glider.be \
--cc=horms+renesas@verge.net.au \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=marek.vasut+renesas@gmail.com \
--cc=wsa@the-dreams.de \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox