From: alankao@andestech.com (Alan Kao)
To: linux-riscv@lists.infradead.org
Subject: [PATCH v5 4/5] Allow to disable FPU support
Date: Thu, 9 Aug 2018 14:26:42 +0800 [thread overview]
Message-ID: <1533796003-680-5-git-send-email-alankao@andestech.com> (raw)
In-Reply-To: <1533796003-680-1-git-send-email-alankao@andestech.com>
FPU codes have been separated from common part in previous patches.
This patch add the CONFIG_FPU option and some stubs, so that a no-FPU
configuration is allowed.
Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
arch/riscv/Kconfig | 9 +++++++++
arch/riscv/include/asm/switch_to.h | 10 ++++++++++
arch/riscv/kernel/Makefile | 2 +-
arch/riscv/kernel/process.c | 4 +++-
arch/riscv/kernel/signal.c | 5 +++++
5 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 6debcc4afc72..6069597ba73f 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -232,6 +232,15 @@ config RISCV_BASE_PMU
endmenu
+config FPU
+ bool "FPU support"
+ default y
+ help
+ Say N here if you want to disable all floating-point related procedure
+ in the kernel.
+
+ If you don't know what to do here, say Y.
+
endmenu
menu "Kernel type"
diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
index dd6b05bff75b..093050b03543 100644
--- a/arch/riscv/include/asm/switch_to.h
+++ b/arch/riscv/include/asm/switch_to.h
@@ -18,6 +18,7 @@
#include <asm/ptrace.h>
#include <asm/csr.h>
+#ifdef CONFIG_FPU
extern void __fstate_save(struct task_struct *save_to);
extern void __fstate_restore(struct task_struct *restore_from);
@@ -55,6 +56,15 @@ static inline void __switch_to_aux(struct task_struct *prev,
fstate_restore(next, task_pt_regs(next));
}
+#define DEFAULT_SSTATUS (SR_SPIE | SR_FS_INITIAL)
+
+#else
+#define fstate_save(task, regs) do { } while (0)
+#define fstate_restore(task, regs) do { } while (0)
+#define __switch_to_aux(__prev, __next) do { } while (0)
+#define DEFAULT_SSTATUS (SR_SPIE | SR_FS_OFF)
+#endif
+
extern struct task_struct *__switch_to(struct task_struct *,
struct task_struct *);
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index bd433efd915e..f13f7f276639 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -13,7 +13,6 @@ extra-y += vmlinux.lds
obj-y += cpu.o
obj-y += cpufeature.o
obj-y += entry.o
-obj-y += fpu.o
obj-y += irq.o
obj-y += process.o
obj-y += ptrace.o
@@ -32,6 +31,7 @@ obj-y += vdso/
CFLAGS_setup.o := -mcmodel=medany
+obj-$(CONFIG_FPU) += fpu.o
obj-$(CONFIG_SMP) += smpboot.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index cb209139ba53..3820d89e2db9 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -83,7 +83,7 @@ void show_regs(struct pt_regs *regs)
void start_thread(struct pt_regs *regs, unsigned long pc,
unsigned long sp)
{
- regs->sstatus = SR_SPIE /* User mode, irqs on */ | SR_FS_INITIAL;
+ regs->sstatus = DEFAULT_SSTATUS;
regs->sepc = pc;
regs->sp = sp;
set_fs(USER_DS);
@@ -91,12 +91,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc,
void flush_thread(void)
{
+#ifdef CONFIG_FPU
/*
* Reset FPU context
* frm: round to nearest, ties to even (IEEE default)
* fflags: accrued exceptions cleared
*/
memset(¤t->thread.fstate, 0, sizeof(current->thread.fstate));
+#endif
}
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c
index 6a18b9819ead..2450b824d799 100644
--- a/arch/riscv/kernel/signal.c
+++ b/arch/riscv/kernel/signal.c
@@ -37,6 +37,7 @@ struct rt_sigframe {
struct ucontext uc;
};
+#ifdef CONFIG_FPU
static long restore_fp_state(struct pt_regs *regs,
union __riscv_fp_state *sc_fpregs)
{
@@ -85,6 +86,10 @@ static long save_fp_state(struct pt_regs *regs,
return err;
}
+#else
+#define save_fp_state(task, regs) (0)
+#define restore_fp_state(task, regs) (0)
+#endif
static long restore_sigcontext(struct pt_regs *regs,
struct sigcontext __user *sc)
--
2.18.0
next prev parent reply other threads:[~2018-08-09 6:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-09 6:26 [PATCH v5 0/5] riscv: Add support to no-FPU systems Alan Kao
2018-08-09 6:26 ` [PATCH v5 1/5] Extract FPU context operations from entry.S Alan Kao
2018-08-09 6:26 ` [PATCH v5 2/5] Refactor FPU code in signal setup/return procedures Alan Kao
2018-08-09 6:26 ` [PATCH v5 3/5] Cleanup ISA string setting Alan Kao
2018-08-09 6:26 ` Alan Kao [this message]
2018-08-09 6:26 ` [PATCH v5 5/5] Auto-detect whether a FPU exists Alan Kao
2018-08-09 6:31 ` Christoph Hellwig
2018-08-09 6:43 ` Alan Kao
2018-08-09 7:02 ` Christoph Hellwig
2018-08-09 7:33 ` Alan Kao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533796003-680-5-git-send-email-alankao@andestech.com \
--to=alankao@andestech.com \
--cc=linux-riscv@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).