[PATCH v1] riscv: dts: renesas: clean up dtbs_check W=1 warning due to empty phy node

Conor Dooley
2023-07-12T08:16:04Z

dtbs_check w/ W=1 complains:
Warning (unit_address_vs_reg): /soc/ethernet@11c20000/ethernet-phy@7: node has a unit name, but no reg or ranges property
Warning (avoid_unnecessary_addr_size): /soc/ethernet@11c20000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

The ethernet@11c20000 node is guarded by an `#if (!SW_ET0_EN_N)` in
rzg2ul-smarc-som.dtsi, where the phy child node is added. In
rzfive-smarc-som.dtsi, the ethernet node is marked disabled & the
interrupt properties are deleted from the phy child node. As a result,
the produced dts looks like:
ethernet@11c20000 {
compatible = "renesas,r9a07g043-gbeth\0renesas,rzg2l-gbeth";
/* snip */
#address-cells = <0x01>;
#size-cells = <0x00>;
status = "disabled";

ethernet-phy@7 {
};
};

Adding a corresponding `#if (!SW_ET0_EN_N)` around the node in
rzfive-smarc-som.dtsi avoids the complaint, as the empty child node is
not added:
ethernet@11c20000 {
compatible = "renesas,r9a07g043-gbeth\0renesas,rzg2l-gbeth";
/* snip */
#address-cells = <0x01>;
#size-cells = <0x00>;
status = "disabled";
};

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
CC: Geert Uytterhoeven <geert+renesas@glider.be>
CC: Magnus Damm <magnus.damm@gmail.com>
CC: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
CC: Conor Dooley <conor+dt@kernel.org>
CC: linux-renesas-soc@vger.kernel.org
CC: devicetree@vger.kernel.org
CC: linux-riscv@lists.infradead.org
CC: linux-kernel@vger.kernel.org
---
arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
index d6f18754eb5d..c62debc7ca7e 100644
--- a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
+++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
@@ -22,6 +22,7 @@ &dmac {
status = "disabled";
};

+#if (!SW_ET0_EN_N)
&eth0 {
status = "disabled";

@@ -30,6 +31,7 @@ phy0: ethernet-phy@7 {
/delete-property/ interrupts;
};
};
+#endif

&eth1 {
status = "disabled";
--
2.40.1