[PATCH v6 0/4] riscv: sophgo: add clock support for sg2042

[PATCH v6 0/4] riscv: sophgo: add clock support for sg2042

[Chen Wang]

From: Chen Wang <unicorn_wang@outlook.com>

This series adds clock controller support for sophgo sg2042.

Thanks,
Chen

---

Changes in v6:
  The patch series is based on v6.7-rc1. You can simply review or test the
  patches at the link [7].
  - fixed some warnings/errors reported by kernel test robot <lkp@intel.com>.

Changes in v5:
  The patch series is based on v6.7-rc1. You can simply review or test the
  patches at the link [6].
  - dt-bindings: improved yaml, such as:
    - add vendor prefix for system-ctrl property for clock generator.
    - Add explanation for system-ctrl property.
  - move sophgo,sg2042-clkgen.yaml to directly under clock folder.
  - fixed bugs for driver Makefile/Kconfig
  - continue cleaning-up debug print for driver code.

Changes in v4:
  The patch series is based on v6.7-rc1. You can simply review or test the
  patches at the link [5].
  - dt-bindings: fixed a dt_binding_check error.

Changes in v3:
  The patch series is based on v6.7-rc1. You can simply review or test the
  patches at the link [3].
  - DTS: don't use syscon but define sg2042 specific system control node. More
    background info can read [4].
  - Updating minor issues in dt-bindings as per input from reviews.

Changes in v2:
  The patch series is based on v6.7-rc1. You can simply review or test the
  patches at the link [2].
  - Squashed the patch adding clock definitions with the patch adding the
    binding for the clock controller.
  - Updating dt-binding for syscon, remove oneOf for property compatible;
    define clock controller as child of syscon.
  - DTS changes: merge sg2042-clock.dtsi into sg2042.dtsi; move clock-frequency
    property of osc to board devicethree due to the oscillator is outside the
    SoC.
  - Fixed some bugs in driver code during testing, including removing warnings
    for rv32_defconfig.
  - Updated MAINTAINERS info.

Changes in v1:
  The patch series is based on v6.7-rc1. You can simply review or test the
  patches at the link [1].

Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v1 [1]
Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v2 [2]
Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v3 [3]
Link: https://lore.kernel.org/linux-riscv/MA0P287MB03329AE180378E1A2E034374FE82A@MA0P287MB0332.INDP287.PROD.OUTLOOK.COM/ [4]
Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v4 [5]
Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v5 [6]
Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v6 [7]

---

Chen Wang (4):
  dt-bindings: soc: sophgo: Add Sophgo system control module
  dt-bindings: clock: sophgo: support SG2042
  clk: sophgo: Add SG2042 clock generator driver
  riscv: dts: add clock generator for Sophgo SG2042 SoC

 .../bindings/clock/sophgo,sg2042-clkgen.yaml  |   53 +
 .../soc/sophgo/sophgo,sg2042-sysctrl.yaml     |   34 +
 MAINTAINERS                                   |    7 +
 .../boot/dts/sophgo/sg2042-milkv-pioneer.dts  |    4 +
 arch/riscv/boot/dts/sophgo/sg2042.dtsi        |   79 +
 drivers/clk/Kconfig                           |    1 +
 drivers/clk/Makefile                          |    1 +
 drivers/clk/sophgo/Kconfig                    |    8 +
 drivers/clk/sophgo/Makefile                   |    2 +
 drivers/clk/sophgo/clk-sophgo-sg2042.c        | 1356 +++++++++++++++++
 drivers/clk/sophgo/clk-sophgo-sg2042.h        |  226 +++
 .../dt-bindings/clock/sophgo,sg2042-clkgen.h  |  169 ++
 12 files changed, 1940 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-sysctrl.yaml
 create mode 100644 drivers/clk/sophgo/Kconfig
 create mode 100644 drivers/clk/sophgo/Makefile
 create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.c
 create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.h
 create mode 100644 include/dt-bindings/clock/sophgo,sg2042-clkgen.h


base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 1/4] dt-bindings: soc: sophgo: Add Sophgo system control module

[Chen Wang]

From: Chen Wang <unicorn_wang@outlook.com>

Add documentation to describe Sophgo System Controller for SG2042.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../soc/sophgo/sophgo,sg2042-sysctrl.yaml     | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-sysctrl.yaml

diff --git a/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-sysctrl.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-sysctrl.yaml
new file mode 100644
index 000000000000..1ec1eaa55598
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-sysctrl.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2042-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 SoC system controller
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+description:
+  The Sophgo SG2042 SoC system controller provides register information such
+  as offset, mask and shift that can be used by other modules, such as clocks.
+
+properties:
+  compatible:
+    const: sophgo,sg2042-sysctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    system-controller@30010000 {
+        compatible = "sophgo,sg2042-sysctrl";
+        reg = <0x30010000 0x1000>;
+    };
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 2/4] dt-bindings: clock: sophgo: support SG2042

[Chen Wang]

From: Chen Wang <unicorn_wang@outlook.com>

Add bindings for the clock generator on the SG2042 RISC-V SoC.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---
 .../bindings/clock/sophgo,sg2042-clkgen.yaml  |  53 ++++++
 .../dt-bindings/clock/sophgo,sg2042-clkgen.h  | 169 ++++++++++++++++++
 2 files changed, 222 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
 create mode 100644 include/dt-bindings/clock/sophgo,sg2042-clkgen.h

diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
new file mode 100644
index 000000000000..f9935e66fc95
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 Clock Generator
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-clkgen
+
+  reg:
+    maxItems: 1
+
+  sophgo,system-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to SG2042 System Controller node. On SG2042, part of control
+      registers of Clock Controller are defined in System controller. Clock
+      driver will use this phandle to get the register map base to plus the
+      offset of the registers to access them.
+
+  clocks:
+    items:
+      - description: Clock Generation IC (25 MHz)
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,sg2042-clkgen.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - sophgo,system-ctrl
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@30012000 {
+        compatible = "sophgo,sg2042-clkgen";
+        reg = <0x30012000 0x1000>;
+        sophgo,system-ctrl = <&sys_ctrl>;
+        clocks = <&cgi>;
+        #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/sophgo,sg2042-clkgen.h b/include/dt-bindings/clock/sophgo,sg2042-clkgen.h
new file mode 100644
index 000000000000..78cd3c3efdb6
--- /dev/null
+++ b/include/dt-bindings/clock/sophgo,sg2042-clkgen.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SOPHGO_SG2042_H__
+#define __DT_BINDINGS_CLOCK_SOPHGO_SG2042_H__
+
+/* Divider clocks */
+#define DIV_CLK_MPLL_RP_CPU_NORMAL_0	0
+#define DIV_CLK_MPLL_AXI_DDR_0		1
+#define DIV_CLK_FPLL_DDR01_1		2
+#define DIV_CLK_FPLL_DDR23_1		3
+#define DIV_CLK_FPLL_RP_CPU_NORMAL_1	4
+#define DIV_CLK_FPLL_50M_A53		5
+#define DIV_CLK_FPLL_TOP_RP_CMN_DIV2	6
+#define DIV_CLK_FPLL_UART_500M		7
+#define DIV_CLK_FPLL_AHB_LPC		8
+#define DIV_CLK_FPLL_EFUSE		9
+#define DIV_CLK_FPLL_TX_ETH0		10
+#define DIV_CLK_FPLL_PTP_REF_I_ETH0	11
+#define DIV_CLK_FPLL_REF_ETH0		12
+#define DIV_CLK_FPLL_EMMC		13
+#define DIV_CLK_FPLL_SD			14
+#define DIV_CLK_FPLL_TOP_AXI0		15
+#define DIV_CLK_FPLL_TOP_AXI_HSPERI	16
+#define DIV_CLK_FPLL_AXI_DDR_1		17
+#define DIV_CLK_FPLL_DIV_TIMER1		18
+#define DIV_CLK_FPLL_DIV_TIMER2		19
+#define DIV_CLK_FPLL_DIV_TIMER3		20
+#define DIV_CLK_FPLL_DIV_TIMER4		21
+#define DIV_CLK_FPLL_DIV_TIMER5		22
+#define DIV_CLK_FPLL_DIV_TIMER6		23
+#define DIV_CLK_FPLL_DIV_TIMER7		24
+#define DIV_CLK_FPLL_DIV_TIMER8		25
+#define DIV_CLK_FPLL_100K_EMMC		26
+#define DIV_CLK_FPLL_100K_SD		27
+#define DIV_CLK_FPLL_GPIO_DB		28
+#define DIV_CLK_DPLL0_DDR01_0		29
+#define DIV_CLK_DPLL1_DDR23_0		30
+
+/* Gate clocks */
+#define GATE_CLK_RP_CPU_NORMAL_DIV0	31
+#define GATE_CLK_AXI_DDR_DIV0		32
+
+#define GATE_CLK_RP_CPU_NORMAL_DIV1	33
+#define GATE_CLK_A53_50M		34
+#define GATE_CLK_TOP_RP_CMN_DIV2	35
+#define GATE_CLK_HSDMA			36
+#define GATE_CLK_EMMC_100M		37
+#define GATE_CLK_SD_100M		38
+#define GATE_CLK_TX_ETH0		39
+#define GATE_CLK_PTP_REF_I_ETH0		40
+#define GATE_CLK_REF_ETH0		41
+#define GATE_CLK_UART_500M		42
+#define GATE_CLK_EFUSE			43
+
+#define GATE_CLK_AHB_LPC		44
+#define GATE_CLK_AHB_ROM		45
+#define GATE_CLK_AHB_SF			46
+
+#define GATE_CLK_APB_UART		47
+#define GATE_CLK_APB_TIMER		48
+#define GATE_CLK_APB_EFUSE		49
+#define GATE_CLK_APB_GPIO		50
+#define GATE_CLK_APB_GPIO_INTR		51
+#define GATE_CLK_APB_SPI		52
+#define GATE_CLK_APB_I2C		53
+#define GATE_CLK_APB_WDT		54
+#define GATE_CLK_APB_PWM		55
+#define GATE_CLK_APB_RTC		56
+
+#define GATE_CLK_AXI_PCIE0		57
+#define GATE_CLK_AXI_PCIE1		58
+#define GATE_CLK_SYSDMA_AXI		59
+#define GATE_CLK_AXI_DBG_I2C		60
+#define GATE_CLK_AXI_SRAM		61
+#define GATE_CLK_AXI_ETH0		62
+#define GATE_CLK_AXI_EMMC		63
+#define GATE_CLK_AXI_SD			64
+#define GATE_CLK_TOP_AXI0		65
+#define GATE_CLK_TOP_AXI_HSPERI		66
+
+#define GATE_CLK_TIMER1			67
+#define GATE_CLK_TIMER2			68
+#define GATE_CLK_TIMER3			69
+#define GATE_CLK_TIMER4			70
+#define GATE_CLK_TIMER5			71
+#define GATE_CLK_TIMER6			72
+#define GATE_CLK_TIMER7			73
+#define GATE_CLK_TIMER8			74
+#define GATE_CLK_100K_EMMC		75
+#define GATE_CLK_100K_SD		76
+#define GATE_CLK_GPIO_DB		77
+
+#define GATE_CLK_AXI_DDR_DIV1		78
+#define GATE_CLK_DDR01_DIV1		79
+#define GATE_CLK_DDR23_DIV1		80
+/* DPLL0 */
+#define GATE_CLK_DDR01_DIV0		81
+/* DPLL1 */
+#define GATE_CLK_DDR23_DIV0		82
+
+#define GATE_CLK_DDR01			83
+#define GATE_CLK_DDR23			84
+#define GATE_CLK_RP_CPU_NORMAL		85
+#define GATE_CLK_AXI_DDR		86
+#define GATE_CLK_RXU0			87
+#define GATE_CLK_RXU1			88
+#define GATE_CLK_RXU2			89
+#define GATE_CLK_RXU3			90
+#define GATE_CLK_RXU4			91
+#define GATE_CLK_RXU5			92
+#define GATE_CLK_RXU6			93
+#define GATE_CLK_RXU7			94
+#define GATE_CLK_RXU8			95
+#define GATE_CLK_RXU9			96
+#define GATE_CLK_RXU10			97
+#define GATE_CLK_RXU11			98
+#define GATE_CLK_RXU12			99
+#define GATE_CLK_RXU13			100
+#define GATE_CLK_RXU14			101
+#define GATE_CLK_RXU15			102
+#define GATE_CLK_RXU16			103
+#define GATE_CLK_RXU17			104
+#define GATE_CLK_RXU18			105
+#define GATE_CLK_RXU19			106
+#define GATE_CLK_RXU20			107
+#define GATE_CLK_RXU21			108
+#define GATE_CLK_RXU22			109
+#define GATE_CLK_RXU23			110
+#define GATE_CLK_RXU24			111
+#define GATE_CLK_RXU25			112
+#define GATE_CLK_RXU26			113
+#define GATE_CLK_RXU27			114
+#define GATE_CLK_RXU28			115
+#define GATE_CLK_RXU29			116
+#define GATE_CLK_RXU30			117
+#define GATE_CLK_RXU31			118
+#define GATE_CLK_MP0			119
+#define GATE_CLK_MP1			120
+#define GATE_CLK_MP2			121
+#define GATE_CLK_MP3			122
+#define GATE_CLK_MP4			123
+#define GATE_CLK_MP5			124
+#define GATE_CLK_MP6			125
+#define GATE_CLK_MP7			126
+#define GATE_CLK_MP8			127
+#define GATE_CLK_MP9			128
+#define GATE_CLK_MP10			129
+#define GATE_CLK_MP11			130
+#define GATE_CLK_MP12			131
+#define GATE_CLK_MP13			132
+#define GATE_CLK_MP14			133
+#define GATE_CLK_MP15			134
+
+/* MUX clocks */
+#define MUX_CLK_DDR01			135
+#define MUX_CLK_DDR23			136
+#define MUX_CLK_RP_CPU_NORMAL		137
+#define MUX_CLK_AXI_DDR			138
+
+/* PLL clocks */
+#define MPLL_CLK			139
+#define FPLL_CLK			140
+#define DPLL0_CLK			141
+#define DPLL1_CLK			142
+
+#endif /* __DT_BINDINGS_CLOCK_SOPHGO_SG2042_H__ */
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 2/4] dt-bindings: clock: sophgo: support SG2042

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 312 bytes --]

On Fri, Dec 08, 2023 at 09:14:02AM +0800, Chen Wang wrote:
> From: Chen Wang <unicorn_wang@outlook.com>
> 
> Add bindings for the clock generator on the SG2042 RISC-V SoC.
> 
> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver

[Chen Wang]

From: Chen Wang <unicorn_wang@outlook.com>

Add a driver for the SOPHGO SG2042 clock generator.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---
 MAINTAINERS                            |    7 +
 drivers/clk/Kconfig                    |    1 +
 drivers/clk/Makefile                   |    1 +
 drivers/clk/sophgo/Kconfig             |    8 +
 drivers/clk/sophgo/Makefile            |    2 +
 drivers/clk/sophgo/clk-sophgo-sg2042.c | 1356 ++++++++++++++++++++++++
 drivers/clk/sophgo/clk-sophgo-sg2042.h |  226 ++++
 7 files changed, 1601 insertions(+)
 create mode 100644 drivers/clk/sophgo/Kconfig
 create mode 100644 drivers/clk/sophgo/Makefile
 create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.c
 create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 97f51d5ec1cf..c9c75468f2cb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20269,6 +20269,13 @@ S:	Maintained
 F:	arch/riscv/boot/dts/sophgo/
 F:	Documentation/devicetree/bindings/riscv/sophgo.yaml
 
+SOPHGO CLOCK DRIVER
+M:	Chen Wang <unicorn_wang@outlook.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/clock/sophgo/
+F:	drivers/clk/sophgo/
+F:	include/dt-bindings/clock/sophgo,sg2042-clkgen.h
+
 SOUND
 M:	Jaroslav Kysela <perex@perex.cz>
 M:	Takashi Iwai <tiwai@suse.com>
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c30d0d396f7a..514343934fda 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -499,6 +499,7 @@ source "drivers/clk/rockchip/Kconfig"
 source "drivers/clk/samsung/Kconfig"
 source "drivers/clk/sifive/Kconfig"
 source "drivers/clk/socfpga/Kconfig"
+source "drivers/clk/sophgo/Kconfig"
 source "drivers/clk/sprd/Kconfig"
 source "drivers/clk/starfive/Kconfig"
 source "drivers/clk/sunxi/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ed71f2e0ee36..eeae7ae93f89 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -119,6 +119,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_CLK_SIFIVE)		+= sifive/
 obj-y					+= socfpga/
+obj-y					+= sophgo/
 obj-$(CONFIG_PLAT_SPEAR)		+= spear/
 obj-y					+= sprd/
 obj-$(CONFIG_ARCH_STI)			+= st/
diff --git a/drivers/clk/sophgo/Kconfig b/drivers/clk/sophgo/Kconfig
new file mode 100644
index 000000000000..feab0b805a29
--- /dev/null
+++ b/drivers/clk/sophgo/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config CLK_SOPHGO_SG2042
+	bool "Sophgo SG2042 clock support"
+	depends on ARCH_SOPHGO || COMPILE_TEST
+	default y
+	help
+	  Say yes here to support the clock controller on the Sophgo SG2042 SoC.
diff --git a/drivers/clk/sophgo/Makefile b/drivers/clk/sophgo/Makefile
new file mode 100644
index 000000000000..13834cce260c
--- /dev/null
+++ b/drivers/clk/sophgo/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CLK_SOPHGO_SG2042)	+= clk-sophgo-sg2042.o
diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.c b/drivers/clk/sophgo/clk-sophgo-sg2042.c
new file mode 100644
index 000000000000..2331efcd115c
--- /dev/null
+++ b/drivers/clk/sophgo/clk-sophgo-sg2042.c
@@ -0,0 +1,1356 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sophgo SG2042 Clock Generator Driver
+ *
+ * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/sophgo,sg2042-clkgen.h>
+
+#include "clk-sophgo-sg2042.h"
+
+#define div_mask(width) ((1 << (width)) - 1)
+#define ENCODE_PLL_CTRL(fbdiv, p1, p2, refdiv) \
+	(((fbdiv & 0xfff) << 16) | ((p2 & 0x7) << 12) | ((p1 & 0x7) << 8) | (refdiv & 0x3f))
+
+static inline int __sg2042_pll_enable(struct sg2042_pll_clock *pll, bool en)
+{
+	unsigned int value = 0;
+	unsigned long enter;
+	struct regmap *map = pll->map;
+
+	if (en) {
+		/* wait pll lock */
+		enter = jiffies;
+		regmap_read(map, pll->offset_status, &value);
+		while (!((value >> pll->shift_status_lock) & 0x1)) {
+			regmap_read(map, pll->shift_status_lock, &value);
+			if (time_after(jiffies, enter + HZ / 10))
+				pr_warn("%s not locked\n", pll->name);
+		}
+		/* wait pll updating */
+		enter = jiffies;
+		regmap_read(map, pll->shift_status_updating, &value);
+		while (((value >> pll->shift_status_updating) & 0x1)) {
+			regmap_read(map, pll->shift_status_updating, &value);
+			if (time_after(jiffies, enter + HZ / 10))
+				pr_warn("%s still updating\n", pll->name);
+		}
+		/* enable pll */
+		regmap_read(map, pll->offset_enable, &value);
+		regmap_write(map, pll->offset_enable, value | (1 << pll->shift_enable));
+	} else {
+		/* disable pll */
+		regmap_read(map, pll->offset_enable, &value);
+		regmap_write(map, pll->offset_enable, value & (~(1 << pll->shift_enable)));
+	}
+
+	return 0;
+}
+
+static unsigned int __sg2042_get_table_div(
+	const struct clk_div_table *table,
+	unsigned int val)
+{
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->val == val)
+			return clkt->div;
+	return 0;
+}
+
+static unsigned int __sg2042_get_div(
+	const struct clk_div_table *table,
+	unsigned int val,
+	unsigned long flags, u8 width)
+{
+	if (flags & CLK_DIVIDER_ONE_BASED)
+		return val;
+	if (flags & CLK_DIVIDER_POWER_OF_TWO)
+		return 1 << val;
+	if (flags & CLK_DIVIDER_MAX_AT_ZERO)
+		return val ? val : div_mask(width) + 1;
+	if (table)
+		return __sg2042_get_table_div(table, val);
+	return val + 1;
+}
+
+/*
+ * @reg_value: current register value
+ * @parent_rate: parent frequency
+ *
+ * This function is used to calculate below "rate" in equation
+ * rate = (parent_rate/REFDIV) x FBDIV/POSTDIV1/POSTDIV2
+ *      = (parent_rate x FBDIV) / (REFDIV x POSTDIV1 x POSTDIV2)
+ */
+static unsigned long __sg2042_pll_recalc_rate(
+	unsigned int reg_value,
+	unsigned long parent_rate)
+{
+	unsigned int fbdiv, refdiv;
+	unsigned int postdiv1, postdiv2;
+	u64 rate, numerator, denominator;
+
+	fbdiv = (reg_value >> 16) & 0xfff;
+	refdiv = reg_value & 0x3f;
+	postdiv1 = (reg_value >> 8) & 0x7;
+	postdiv2 = (reg_value >> 12) & 0x7;
+
+	numerator = parent_rate * fbdiv;
+	denominator = refdiv * postdiv1 * postdiv2;
+	do_div(numerator, denominator);
+	rate = numerator;
+
+	return rate;
+}
+
+/*
+ * Below array is the total combination lists of POSTDIV1 and POSTDIV2
+ * for example:
+ * postdiv1_2[0] = {2, 4, 8}
+ *           ==> div1 = 2, div2 = 4 , div1 * div2 = 8
+ * And POSTDIV_RESULT_INDEX point to 3rd element in the array
+ */
+#define	POSTDIV_RESULT_INDEX	2
+static int postdiv1_2[][3] = {
+	{2, 4,  8}, {3, 3,  9}, {2, 5, 10}, {2, 6, 12},
+	{2, 7, 14}, {3, 5, 15}, {4, 4, 16}, {3, 6, 18},
+	{4, 5, 20}, {3, 7, 21}, {4, 6, 24}, {5, 5, 25},
+	{4, 7, 28}, {5, 6, 30}, {5, 7, 35}, {6, 6, 36},
+	{6, 7, 42}, {7, 7, 49}
+};
+
+/*
+ * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
+ * to get the closest postdiiv combination.
+ * @rate: FOUTPOSTDIV
+ * @prate: parent rate, i.e. FREF
+ * @fbdiv: FBDIV
+ * @refdiv: REFDIV
+ * @postdiv1: POSTDIV1, output
+ * @postdiv2: POSTDIV2, output
+ * See TRM:
+ * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
+ * So we get following formula to get POSTDIV1 and POSTDIV2:
+ * POSTDIV = (prate/REFDIV) x FBDIV/rate
+ * above POSTDIV = POSTDIV1*POSTDIV2
+ */
+static int __sg2042_pll_get_postdiv_1_2(
+	unsigned long rate,
+	unsigned long prate,
+	unsigned int fbdiv,
+	unsigned int refdiv,
+	unsigned int *postdiv1,
+	unsigned int *postdiv2)
+{
+	int index = 0;
+	int ret = 0;
+	u64 tmp0;
+
+	/* prate/REFDIV and result save to tmp0 */
+	tmp0 = prate;
+	do_div(tmp0, refdiv);
+
+	/* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
+	tmp0 *= fbdiv;
+
+	/* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
+	do_div(tmp0, rate);
+
+	/* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
+	if (tmp0 <= 7) {
+		/* (div1 * div2) <= 7, no need to use array search */
+		*postdiv1 = tmp0;
+		*postdiv2 = 1;
+	} else {
+		/* (div1 * div2) > 7, use array search */
+		for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
+			if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
+				continue;
+			} else {
+				/* found it */
+				break;
+			}
+		}
+		if (index < ARRAY_SIZE(postdiv1_2)) {
+			*postdiv1 = postdiv1_2[index][1];
+			*postdiv2 = postdiv1_2[index][0];
+		} else {
+			pr_debug("%s can not find in postdiv array!\n", __func__);
+			ret = -EINVAL;
+		}
+	}
+
+	return ret;
+}
+
+#define KHZ 1000UL
+#define MHZ (KHZ * KHZ)
+
+#define REFDIV_MIN 1
+#define REFDIV_MAX 63
+#define FBDIV_MIN 16
+#define FBDIV_MAX 320
+
+#define PLL_FREF_SG2042 (25 * MHZ)
+
+#define PLL_FOUTPOSTDIV_MIN (16 * MHZ)
+#define PLL_FOUTPOSTDIV_MAX (3200 * MHZ)
+
+#define PLL_FOUTVCO_MIN (800 * MHZ)
+#define PLL_FOUTVCO_MAX (3200 * MHZ)
+
+struct sg2042_pll_ctrl {
+	unsigned long freq;
+	unsigned int fbdiv;
+	unsigned int postdiv1;
+	unsigned int postdiv2;
+	unsigned int refdiv;
+};
+
+/*
+ * Based on the given FOUTPISTDIV and the input FREF to calculate
+ * the REFDIV/FBDIV/PSTDIV1/POSTDIV2 combination for pllctrl register.
+ * @req_rate: expected output clock rate, i.e. FOUTPISTDIV
+ * @parent_rate: input parent clock rate, i.e. FREF
+ * @best: output to hold calculated combination of REFDIV/FBDIV/PSTDIV1/POSTDIV2
+ */
+static int __sg2042_get_pll_ctl_setting(
+	struct sg2042_pll_ctrl *best,
+	unsigned long req_rate,
+	unsigned long parent_rate)
+{
+	int ret;
+	unsigned int fbdiv, refdiv, postdiv1, postdiv2;
+	unsigned long foutpostdiv;
+	u64 tmp;
+	u64 foutvco;
+
+	if (parent_rate != PLL_FREF_SG2042) {
+		pr_alert("INVALID FREF: %ld\n", parent_rate);
+		return -EINVAL;
+	}
+
+	if (req_rate < PLL_FOUTPOSTDIV_MIN || req_rate > PLL_FOUTPOSTDIV_MAX) {
+		pr_alert("INVALID FOUTPOSTDIV: %ld\n", req_rate);
+		return -EINVAL;
+	}
+
+	memset(best, 0, sizeof(struct sg2042_pll_ctrl));
+
+	for (refdiv = REFDIV_MIN; refdiv < REFDIV_MAX + 1; refdiv++) {
+		/* required by hardware: FREF/REFDIV must > 10 */
+		tmp = parent_rate;
+		do_div(tmp, refdiv);
+		if (tmp <= 10)
+			continue;
+
+		for (fbdiv = FBDIV_MIN; fbdiv < FBDIV_MAX + 1; fbdiv++) {
+			/*
+			 * FOUTVCO = FREF*FBDIV/REFDIV validation
+			 * required by hardware, FOUTVCO must [800MHz, 3200MHz]
+			 */
+			foutvco = parent_rate * fbdiv;
+			do_div(foutvco, refdiv);
+			if (foutvco < PLL_FOUTVCO_MIN || foutvco > PLL_FOUTVCO_MAX)
+				continue;
+
+			ret = __sg2042_pll_get_postdiv_1_2(
+				req_rate, parent_rate, fbdiv, refdiv,
+				&postdiv1, &postdiv2);
+			if (ret)
+				continue;
+
+			/*
+			 * FOUTPOSTDIV = FREF*FBDIV/REFDIV/(POSTDIV1*POSTDIV2)
+			 *             = FOUTVCO/(POSTDIV1*POSTDIV2)
+			 */
+			tmp = foutvco;
+			do_div(tmp, (postdiv1 * postdiv2));
+			foutpostdiv = (unsigned long)tmp;
+			/* Iterative to approach the expected value */
+			if (abs_diff(foutpostdiv, req_rate) <
+			    abs_diff(best->freq, req_rate)) {
+				best->freq = foutpostdiv;
+				best->refdiv = refdiv;
+				best->fbdiv = fbdiv;
+				best->postdiv1 = postdiv1;
+				best->postdiv2 = postdiv2;
+				if (foutpostdiv == req_rate)
+					return 0;
+			}
+			continue;
+		}
+	}
+
+	if (best->freq == 0)
+		return -EINVAL;
+	else
+		return 0;
+}
+
+/*
+ * @hw: ccf use to hook get sg2042_pll_clock
+ * @parent_rate: parent rate
+ *
+ * The is function will be called through clk_get_rate
+ * and return current rate after decoding reg value
+ */
+static unsigned long sg2042_clk_pll_recalc_rate(
+	struct clk_hw *hw,
+	unsigned long parent_rate)
+{
+	unsigned int value;
+	unsigned long rate;
+	struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
+
+	regmap_read(pll->map, pll->offset_ctrl, &value);
+	rate = __sg2042_pll_recalc_rate(value, parent_rate);
+
+	pr_debug("--> %s: pll_recalc_rate: val = %ld\n",
+		clk_hw_get_name(hw), rate);
+	return rate;
+}
+
+static long sg2042_clk_pll_round_rate(
+	struct clk_hw *hw,
+	unsigned long req_rate,
+	unsigned long *prate)
+{
+	unsigned int value;
+	struct sg2042_pll_ctrl pctrl_table;
+	long proper_rate;
+	int ret;
+
+	ret = __sg2042_get_pll_ctl_setting(&pctrl_table, req_rate, *prate);
+	if (ret) {
+		proper_rate = 0;
+		goto out;
+	}
+
+	value = ENCODE_PLL_CTRL(pctrl_table.fbdiv, pctrl_table.postdiv1,
+			     pctrl_table.postdiv2, pctrl_table.refdiv);
+	proper_rate = (long)__sg2042_pll_recalc_rate(value, *prate);
+
+out:
+	pr_debug("--> %s: pll_round_rate: val = %ld\n",
+		clk_hw_get_name(hw), proper_rate);
+	return proper_rate;
+}
+
+static int sg2042_clk_pll_determine_rate(
+	struct clk_hw *hw,
+	struct clk_rate_request *req)
+{
+	req->rate = sg2042_clk_pll_round_rate(hw, min(req->rate, req->max_rate),
+					  &req->best_parent_rate);
+	pr_debug("--> %s: pll_determine_rate: val = %ld\n",
+		clk_hw_get_name(hw), req->rate);
+	return 0;
+}
+
+static int sg2042_clk_pll_set_rate(
+	struct clk_hw *hw,
+	unsigned long rate,
+	unsigned long parent_rate)
+{
+	unsigned long flags;
+	unsigned int value;
+	int ret = 0;
+	struct sg2042_pll_ctrl pctrl_table;
+	struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
+
+	spin_lock_irqsave(pll->lock, flags);
+	if (__sg2042_pll_enable(pll, 0)) {
+		pr_warn("Can't disable pll(%s), status error\n", pll->name);
+		goto out;
+	}
+	ret = __sg2042_get_pll_ctl_setting(&pctrl_table, rate, parent_rate);
+	if (ret) {
+		pr_warn("%s: Can't find a proper pll setting\n", pll->name);
+		goto out2;
+	}
+
+	value = ENCODE_PLL_CTRL(pctrl_table.fbdiv, pctrl_table.postdiv1,
+			     pctrl_table.postdiv2, pctrl_table.refdiv);
+
+	/* write the value to top register */
+	regmap_write(pll->map, pll->offset_ctrl, value);
+
+out2:
+	__sg2042_pll_enable(pll, 1);
+out:
+	spin_unlock_irqrestore(pll->lock, flags);
+
+	pr_debug("--> %s: pll_set_rate: val = 0x%x\n",
+		clk_hw_get_name(hw), value);
+	return ret;
+}
+
+static unsigned long sg2042_clk_divider_recalc_rate(
+	struct clk_hw *hw,
+	unsigned long parent_rate)
+{
+	struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+	unsigned int val;
+	unsigned long ret_rate;
+
+	val = readl(divider->reg) >> divider->shift;
+	val &= div_mask(divider->width);
+
+	ret_rate = divider_recalc_rate(hw, parent_rate, val, divider->table,
+				   divider->div_flags, divider->width);
+
+	pr_debug("--> %s: divider_recalc_rate: val = %ld\n",
+		clk_hw_get_name(hw), ret_rate);
+	return ret_rate;
+}
+
+static long sg2042_clk_divider_round_rate(
+	struct clk_hw *hw,
+	unsigned long rate,
+	unsigned long *prate)
+{
+	int bestdiv;
+	unsigned long ret_rate;
+	struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+
+	/* if read only, just return current value */
+	if (divider->div_flags & CLK_DIVIDER_READ_ONLY) {
+		bestdiv = readl(divider->reg) >> divider->shift;
+		bestdiv &= div_mask(divider->width);
+		bestdiv = __sg2042_get_div(divider->table, bestdiv, divider->div_flags,
+				   divider->width);
+		ret_rate = DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
+	} else {
+		ret_rate = divider_round_rate(hw, rate, prate, divider->table,
+				  divider->width, divider->div_flags);
+	}
+
+	pr_debug("--> %s: divider_round_rate: val = %ld\n",
+		clk_hw_get_name(hw), ret_rate);
+	return ret_rate;
+}
+
+static int sg2042_clk_divider_set_rate(
+	struct clk_hw *hw,
+	unsigned long rate,
+	unsigned long parent_rate)
+{
+	unsigned int value;
+	unsigned int val, val2;
+	unsigned long flags = 0;
+	struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
+
+	value = divider_get_val(rate, parent_rate, divider->table,
+				divider->width, divider->div_flags);
+
+	if (divider->lock)
+		spin_lock_irqsave(divider->lock, flags);
+	else
+		__acquire(divider->lock);
+
+	/* div assert */
+	val = readl(divider->reg);
+	val &= ~0x1;
+	writel(val, divider->reg);
+
+	if (divider->div_flags & CLK_DIVIDER_HIWORD_MASK) {
+		val = div_mask(divider->width) << (divider->shift + 16);
+	} else {
+		val = readl(divider->reg);
+		val &= ~(div_mask(divider->width) << divider->shift);
+	}
+
+	val |= value << divider->shift;
+	writel(val, divider->reg);
+	val2 = val;
+
+	if (!(divider->div_flags & CLK_DIVIDER_READ_ONLY))
+		val |= 1 << 3;
+
+	/* de-assert */
+	val |= 1;
+	writel(val, divider->reg);
+	if (divider->lock)
+		spin_unlock_irqrestore(divider->lock, flags);
+	else
+		__release(divider->lock);
+
+	pr_debug("--> %s: divider_set_rate: register val = 0x%x\n",
+		clk_hw_get_name(hw), val2);
+	return 0;
+}
+
+static const struct clk_ops sg2042_clk_divider_ops = {
+	.recalc_rate = sg2042_clk_divider_recalc_rate,
+	.round_rate = sg2042_clk_divider_round_rate,
+	.set_rate = sg2042_clk_divider_set_rate,
+};
+
+static const struct clk_ops sg2042_clk_divider_ro_ops = {
+	.recalc_rate = sg2042_clk_divider_recalc_rate,
+	.round_rate = sg2042_clk_divider_round_rate,
+};
+
+static const struct clk_ops sg2042_clk_pll_ops = {
+	.recalc_rate = sg2042_clk_pll_recalc_rate,
+	.round_rate = sg2042_clk_pll_round_rate,
+	.determine_rate = sg2042_clk_pll_determine_rate,
+	.set_rate = sg2042_clk_pll_set_rate,
+};
+
+static const struct clk_ops sg2042_clk_pll_ro_ops = {
+	.recalc_rate = sg2042_clk_pll_recalc_rate,
+	.round_rate = sg2042_clk_pll_round_rate,
+};
+
+#define SG2042_PLL(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
+	{								\
+		.hw.init = CLK_HW_INIT_PARENTS(				\
+				_name,					\
+				(const char *[]){_parent_name},		\
+				&sg2042_clk_pll_ops,			\
+				CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
+		.id = _id,						\
+		.name = _name,						\
+		.offset_ctrl = _r_ctrl,					\
+		.offset_status = _r_stat,				\
+		.offset_enable = _r_enable,				\
+		.shift_status_lock = 8 + _shift,			\
+		.shift_status_updating = _shift,			\
+		.shift_enable = _shift,					\
+	}
+
+#define SG2042_PLL_RO(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
+	{								\
+		.hw.init = CLK_HW_INIT_PARENTS(				\
+				_name,					\
+				(const char *[]){_parent_name},		\
+				&sg2042_clk_pll_ro_ops,			\
+				CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
+		.id = _id,						\
+		.name = _name,						\
+		.offset_ctrl = _r_ctrl,					\
+		.offset_status = _r_stat,				\
+		.offset_enable = _r_enable,				\
+		.shift_status_lock = 8 + _shift,			\
+		.shift_status_updating = _shift,			\
+		.shift_enable = _shift,					\
+	}
+
+static struct sg2042_pll_clock sg2042_pll_clks[] = {
+	SG2042_PLL_RO(FPLL_CLK, "fpll_clock", "cgi",
+		R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_FPLL_CONTROL, 3),
+	SG2042_PLL_RO(DPLL0_CLK, "dpll0_clock", "cgi",
+		R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL0_CONTROL, 4),
+	SG2042_PLL_RO(DPLL1_CLK, "dpll1_clock", "cgi",
+		R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL1_CONTROL, 5),
+	SG2042_PLL(MPLL_CLK, "mpll_clock", "cgi",
+		R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_MPLL_CONTROL, 0),
+};
+
+#define SG2042_DIV(_id, _name, _parent_name,				\
+		  _r_ctrl, _shift, _width,				\
+		  _div_flag, _init_val) {				\
+		.hw.init = CLK_HW_INIT_PARENTS(				\
+				_name,					\
+				(const char *[]){_parent_name},		\
+				&sg2042_clk_divider_ops,		\
+				0),					\
+		.id = _id,						\
+		.name = _name,						\
+		.offset_ctrl = _r_ctrl,					\
+		.shift = _shift,					\
+		.width = _width,					\
+		.div_flags = _div_flag,					\
+		.initial_val = _init_val,				\
+		.table = NULL,						\
+	}
+
+#define SG2042_DIV_RO(_id, _name, _parent_name,				\
+		  _r_ctrl, _shift, _width,				\
+		  _div_flag, _init_val) {				\
+		.hw.init = CLK_HW_INIT_PARENTS(				\
+				_name,					\
+				(const char *[]){_parent_name},		\
+				&sg2042_clk_divider_ro_ops,		\
+				0),					\
+		.id = _id,						\
+		.name = _name,						\
+		.offset_ctrl = _r_ctrl,					\
+		.shift = _shift,					\
+		.width = _width,					\
+		.div_flags = _div_flag,					\
+		.initial_val = _init_val,				\
+		.table = NULL,						\
+	}
+
+/*
+ * DIV items in the array are sorted according to the clock-tree diagram,
+ * from top to bottom, from upstream to downstream. Read TRM for details.
+ */
+#define DEF_DIVFLAG (CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO)
+static struct sg2042_divider_clock sg2042_div_clks[] = {
+	SG2042_DIV_RO(DIV_CLK_DPLL0_DDR01_0,
+		"clk_div_ddr01_0", "clk_gate_ddr01_div0",
+		R_CLKDIVREG27, 16, 5,
+		DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
+	SG2042_DIV_RO(DIV_CLK_FPLL_DDR01_1,
+		"clk_div_ddr01_1", "clk_gate_ddr01_div1",
+		R_CLKDIVREG28, 16, 5,
+		DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
+
+	SG2042_DIV_RO(DIV_CLK_DPLL1_DDR23_0,
+		"clk_div_ddr23_0", "clk_gate_ddr23_div0",
+		R_CLKDIVREG29, 16, 5,
+		DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
+	SG2042_DIV_RO(DIV_CLK_FPLL_DDR23_1,
+		"clk_div_ddr23_1", "clk_gate_ddr23_div1",
+		R_CLKDIVREG30, 16, 5,
+		DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
+
+	SG2042_DIV(DIV_CLK_MPLL_RP_CPU_NORMAL_0,
+		"clk_div_rp_cpu_normal_0", "clk_gate_rp_cpu_normal_div0",
+		R_CLKDIVREG0, 16, 5, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_RP_CPU_NORMAL_1,
+		"clk_div_rp_cpu_normal_1", "clk_gate_rp_cpu_normal_div1",
+		R_CLKDIVREG1, 16, 5, DEF_DIVFLAG, 0),
+
+	SG2042_DIV(DIV_CLK_MPLL_AXI_DDR_0,
+		"clk_div_axi_ddr_0", "clk_gate_axi_ddr_div0",
+		R_CLKDIVREG25, 16, 5, DEF_DIVFLAG, 5),
+	SG2042_DIV(DIV_CLK_FPLL_AXI_DDR_1,
+		"clk_div_axi_ddr_1", "clk_gate_axi_ddr_div1",
+		R_CLKDIVREG26, 16, 5, DEF_DIVFLAG, 5),
+
+	SG2042_DIV(DIV_CLK_FPLL_TOP_RP_CMN_DIV2,
+		"clk_div_top_rp_cmn_div2", "clk_mux_rp_cpu_normal",
+		R_CLKDIVREG3, 16, 16, DEF_DIVFLAG, 0),
+
+	SG2042_DIV(DIV_CLK_FPLL_50M_A53, "clk_div_50m_a53", "fpll_clock",
+		R_CLKDIVREG2, 16, 8, DEF_DIVFLAG, 0),
+	/* downstream of div_50m_a53 */
+	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER1, "clk_div_timer1", "clk_div_50m_a53",
+		R_CLKDIVREG6, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER2, "clk_div_timer2", "clk_div_50m_a53",
+		R_CLKDIVREG7, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER3, "clk_div_timer3", "clk_div_50m_a53",
+		R_CLKDIVREG8, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER4, "clk_div_timer4", "clk_div_50m_a53",
+		R_CLKDIVREG9, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER5, "clk_div_timer5", "clk_div_50m_a53",
+		R_CLKDIVREG10, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER6, "clk_div_timer6", "clk_div_50m_a53",
+		R_CLKDIVREG11, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER7, "clk_div_timer7", "clk_div_50m_a53",
+		R_CLKDIVREG12, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER8, "clk_div_timer8", "clk_div_50m_a53",
+		R_CLKDIVREG13, 16, 16, DEF_DIVFLAG, 0),
+
+	SG2042_DIV_RO(DIV_CLK_FPLL_UART_500M, "clk_div_uart_500m", "fpll_clock",
+		R_CLKDIVREG4, 16, 7,
+		CLK_DIVIDER_READ_ONLY, 0),
+	SG2042_DIV(DIV_CLK_FPLL_AHB_LPC, "clk_div_ahb_lpc", "fpll_clock",
+		R_CLKDIVREG5, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_EFUSE, "clk_div_efuse", "fpll_clock",
+		R_CLKDIVREG14, 16, 7, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_TX_ETH0, "clk_div_tx_eth0", "fpll_clock",
+		R_CLKDIVREG16, 16, 11, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_PTP_REF_I_ETH0,
+		"clk_div_ptp_ref_i_eth0", "fpll_clock",
+		R_CLKDIVREG17, 16, 8, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_REF_ETH0, "clk_div_ref_eth0", "fpll_clock",
+		R_CLKDIVREG18, 16, 8, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_EMMC, "clk_div_emmc", "fpll_clock",
+		R_CLKDIVREG19, 16, 5, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_SD, "clk_div_sd", "fpll_clock",
+		R_CLKDIVREG21, 16, 5, DEF_DIVFLAG, 0),
+
+	SG2042_DIV(DIV_CLK_FPLL_TOP_AXI0, "clk_div_top_axi0", "fpll_clock",
+		R_CLKDIVREG23, 16, 5, DEF_DIVFLAG, 0),
+	/* downstream of div_top_axi0 */
+	SG2042_DIV(DIV_CLK_FPLL_100K_EMMC, "clk_div_100k_emmc", "clk_div_top_axi0",
+		R_CLKDIVREG20, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_100K_SD, "clk_div_100k_sd", "clk_div_top_axi0",
+		R_CLKDIVREG22, 16, 16, DEF_DIVFLAG, 0),
+	SG2042_DIV(DIV_CLK_FPLL_GPIO_DB, "clk_div_gpio_db", "clk_div_top_axi0",
+		R_CLKDIVREG15, 16, 16, DEF_DIVFLAG, 0),
+
+	SG2042_DIV(DIV_CLK_FPLL_TOP_AXI_HSPERI,
+		"clk_div_top_axi_hsperi", "fpll_clock",
+		R_CLKDIVREG24, 16, 5, DEF_DIVFLAG, 0),
+};
+
+#define SG2042_GATE(_id, _name, _parent_name, _flags, \
+		    _r_enable, _bit_idx, _flag_r) { \
+		.id = _id,			\
+		.name = _name,			\
+		.parent_name = _parent_name,	\
+		.flags = _flags,		\
+		.offset_enable = _r_enable,	\
+		.bit_idx = _bit_idx,		\
+		.flag_sysctrl = _flag_r,	\
+	}
+
+/*
+ * GATE items in the array are sorted according to the clock-tree diagram,
+ * from top to bottom, from upstream to downstream. Read TRM for details.
+ */
+static const struct sg2042_gate_clock sg2042_gate_clks[] = {
+	SG2042_GATE(GATE_CLK_DDR01_DIV0, "clk_gate_ddr01_div0", "dpll0_clock",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		R_CLKDIVREG27, 4, 0),
+	SG2042_GATE(GATE_CLK_DDR01_DIV1, "clk_gate_ddr01_div1", "fpll_clock",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKDIVREG28, 4, 0),
+
+	SG2042_GATE(GATE_CLK_DDR23_DIV0, "clk_gate_ddr23_div0", "dpll1_clock",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		R_CLKDIVREG29, 4, 0),
+	SG2042_GATE(GATE_CLK_DDR23_DIV1, "clk_gate_ddr23_div1", "fpll_clock",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKDIVREG30, 4, 0),
+
+	SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV0, "clk_gate_rp_cpu_normal_div0", "mpll_clock",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKDIVREG0, 4, 0),
+	SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV1,
+		"clk_gate_rp_cpu_normal_div1", "fpll_clock",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKDIVREG1, 4, 0),
+
+	SG2042_GATE(GATE_CLK_AXI_DDR_DIV0, "clk_gate_axi_ddr_div0", "mpll_clock",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKDIVREG25, 4, 0),
+	SG2042_GATE(GATE_CLK_AXI_DDR_DIV1, "clk_gate_axi_ddr_div1", "fpll_clock",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKDIVREG26, 4, 0),
+
+	/* upon are gate clocks as input source for the muxes */
+
+	SG2042_GATE(GATE_CLK_DDR01, "clk_gate_ddr01", "clk_mux_ddr01",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKENREG1, 14, 0),
+
+	SG2042_GATE(GATE_CLK_DDR23, "clk_gate_ddr23", "clk_mux_ddr23",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKENREG1, 15, 0),
+
+	SG2042_GATE(GATE_CLK_RP_CPU_NORMAL,
+		"clk_gate_rp_cpu_normal", "clk_mux_rp_cpu_normal",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKENREG0, 0, 0),
+
+	SG2042_GATE(GATE_CLK_AXI_DDR, "clk_gate_axi_ddr", "clk_mux_axi_ddr",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKENREG1, 13, 0),
+
+	/* upon are gate clocks directly downstream of muxes */
+
+	/* downstream of clk_div_top_rp_cmn_div2 */
+	SG2042_GATE(GATE_CLK_TOP_RP_CMN_DIV2,
+		"clk_gate_top_rp_cmn_div2", "clk_div_top_rp_cmn_div2",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 2, 0),
+	SG2042_GATE(GATE_CLK_HSDMA, "clk_gate_hsdma", "clk_gate_top_rp_cmn_div2",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 10, 0),
+
+	/*
+	 * downstream of clk_gate_rp_cpu_normal
+	 *
+	 * FIXME: there should be one 1/2 DIV between clk_gate_rp_cpu_normal
+	 * and clk_gate_axi_pcie0/clk_gate_axi_pcie1.
+	 * But the 1/2 DIV is fixed and no configurable register exported, so
+	 * when reading from these two clocks, the rate value are still the
+	 * same as that of clk_gate_rp_cpu_normal, it's not correct.
+	 * This just affects the value read.
+	 */
+	SG2042_GATE(GATE_CLK_AXI_PCIE0,
+		"clk_gate_axi_pcie0", "clk_gate_rp_cpu_normal",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 8, 0),
+	SG2042_GATE(GATE_CLK_AXI_PCIE1,
+		"clk_gate_axi_pcie1", "clk_gate_rp_cpu_normal",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 9, 0),
+
+	/* downstream of div_50m_a53 */
+	SG2042_GATE(GATE_CLK_A53_50M, "clk_gate_a53_50m", "clk_div_50m_a53",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 1, 0),
+	SG2042_GATE(GATE_CLK_TIMER1, "clk_gate_timer1", "clk_div_timer1",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 12, 0),
+	SG2042_GATE(GATE_CLK_TIMER2, "clk_gate_timer2", "clk_div_timer2",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 13, 0),
+	SG2042_GATE(GATE_CLK_TIMER3, "clk_gate_timer3", "clk_div_timer3",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 14, 0),
+	SG2042_GATE(GATE_CLK_TIMER4, "clk_gate_timer4", "clk_div_timer4",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 15, 0),
+	SG2042_GATE(GATE_CLK_TIMER5, "clk_gate_timer5", "clk_div_timer5",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 16, 0),
+	SG2042_GATE(GATE_CLK_TIMER6, "clk_gate_timer6", "clk_div_timer6",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 17, 0),
+	SG2042_GATE(GATE_CLK_TIMER7, "clk_gate_timer7", "clk_div_timer7",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 18, 0),
+	SG2042_GATE(GATE_CLK_TIMER8, "clk_gate_timer8", "clk_div_timer8",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 19, 0),
+
+	/* gate clocks downstream from div clocks one-to-one */
+	SG2042_GATE(GATE_CLK_UART_500M, "clk_gate_uart_500m", "clk_div_uart_500m",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 4, 0),
+	SG2042_GATE(GATE_CLK_AHB_LPC, "clk_gate_ahb_lpc", "clk_div_ahb_lpc",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 7, 0),
+	SG2042_GATE(GATE_CLK_EFUSE, "clk_gate_efuse", "clk_div_efuse",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 20, 0),
+	SG2042_GATE(GATE_CLK_TX_ETH0, "clk_gate_tx_eth0", "clk_div_tx_eth0",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 30, 0),
+	SG2042_GATE(GATE_CLK_PTP_REF_I_ETH0,
+		"clk_gate_ptp_ref_i_eth0", "clk_div_ptp_ref_i_eth0",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 0, 0),
+	SG2042_GATE(GATE_CLK_REF_ETH0, "clk_gate_ref_eth0", "clk_div_ref_eth0",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 1, 0),
+	SG2042_GATE(GATE_CLK_EMMC_100M, "clk_gate_emmc", "clk_div_emmc",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 3, 0),
+	SG2042_GATE(GATE_CLK_SD_100M, "clk_gate_sd", "clk_div_sd",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 6, 0),
+
+	/* downstream of clk_div_top_axi0 */
+	SG2042_GATE(GATE_CLK_AHB_ROM, "clk_gate_ahb_rom", "clk_div_top_axi0",
+		 0, R_CLKENREG0, 8, 0),
+	SG2042_GATE(GATE_CLK_AHB_SF, "clk_gate_ahb_sf", "clk_div_top_axi0",
+		0, R_CLKENREG0, 9, 0),
+	SG2042_GATE(GATE_CLK_AXI_SRAM, "clk_gate_axi_sram", "clk_div_top_axi0",
+		CLK_IGNORE_UNUSED, R_CLKENREG0, 10, 0),
+	SG2042_GATE(GATE_CLK_APB_TIMER, "clk_gate_apb_timer", "clk_div_top_axi0",
+		CLK_IGNORE_UNUSED, R_CLKENREG0, 11, 0),
+	SG2042_GATE(GATE_CLK_APB_EFUSE, "clk_gate_apb_efuse", "clk_div_top_axi0",
+		0, R_CLKENREG0, 21, 0),
+	SG2042_GATE(GATE_CLK_APB_GPIO, "clk_gate_apb_gpio", "clk_div_top_axi0",
+		0, R_CLKENREG0, 22, 0),
+	SG2042_GATE(GATE_CLK_APB_GPIO_INTR,
+		"clk_gate_apb_gpio_intr", "clk_div_top_axi0",
+		0, R_CLKENREG0, 23, 0),
+	SG2042_GATE(GATE_CLK_APB_I2C, "clk_gate_apb_i2c", "clk_div_top_axi0",
+		0, R_CLKENREG0, 26, 0),
+	SG2042_GATE(GATE_CLK_APB_WDT, "clk_gate_apb_wdt", "clk_div_top_axi0",
+		0, R_CLKENREG0, 27, 0),
+	SG2042_GATE(GATE_CLK_APB_PWM, "clk_gate_apb_pwm", "clk_div_top_axi0",
+		0, R_CLKENREG0, 28, 0),
+	SG2042_GATE(GATE_CLK_APB_RTC, "clk_gate_apb_rtc", "clk_div_top_axi0",
+		0, R_CLKENREG0, 29, 0),
+	SG2042_GATE(GATE_CLK_TOP_AXI0, "clk_gate_top_axi0", "clk_div_top_axi0",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_CLKENREG1, 11, 0),
+	/* downstream of DIV clocks which are sourced from clk_div_top_axi0 */
+	SG2042_GATE(GATE_CLK_GPIO_DB, "clk_gate_gpio_db", "clk_div_gpio_db",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 24, 0),
+	SG2042_GATE(GATE_CLK_100K_EMMC, "clk_gate_100k_emmc", "clk_div_100k_emmc",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 4, 0),
+	SG2042_GATE(GATE_CLK_100K_SD, "clk_gate_100k_sd", "clk_div_100k_sd",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 7, 0),
+
+	/* downstream of clk_div_top_axi_hsperi */
+	SG2042_GATE(GATE_CLK_SYSDMA_AXI,
+		"clk_gate_sysdma_axi", "clk_div_top_axi_hsperi",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 3, 0),
+	SG2042_GATE(GATE_CLK_APB_UART,
+		"clk_gate_apb_uart", "clk_div_top_axi_hsperi",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 5, 0),
+	SG2042_GATE(GATE_CLK_AXI_DBG_I2C,
+		"clk_gate_axi_dbg_i2c", "clk_div_top_axi_hsperi",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 6, 0),
+	SG2042_GATE(GATE_CLK_APB_SPI,
+		"clk_gate_apb_spi", "clk_div_top_axi_hsperi",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 25, 0),
+	SG2042_GATE(GATE_CLK_AXI_ETH0,
+		"clk_gate_axi_eth0", "clk_div_top_axi_hsperi",
+		CLK_SET_RATE_PARENT, R_CLKENREG0, 31, 0),
+	SG2042_GATE(GATE_CLK_AXI_EMMC,
+		"clk_gate_axi_emmc", "clk_div_top_axi_hsperi",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 2, 0),
+	SG2042_GATE(GATE_CLK_AXI_SD,
+		"clk_gate_axi_sd", "clk_div_top_axi_hsperi",
+		CLK_SET_RATE_PARENT, R_CLKENREG1, 5, 0),
+	SG2042_GATE(GATE_CLK_TOP_AXI_HSPERI,
+		"clk_gate_top_axi_hsperi", "clk_div_top_axi_hsperi",
+		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
+		R_CLKENREG1, 12, 0),
+
+	/* downstream of clk_gate_rp_cpu_normal about rxu */
+	SG2042_GATE(GATE_CLK_RXU0, "clk_gate_rxu0", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 0, 1),
+	SG2042_GATE(GATE_CLK_RXU1, "clk_gate_rxu1", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 1, 1),
+	SG2042_GATE(GATE_CLK_RXU2, "clk_gate_rxu2", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 2, 1),
+	SG2042_GATE(GATE_CLK_RXU3, "clk_gate_rxu3", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 3, 1),
+	SG2042_GATE(GATE_CLK_RXU4, "clk_gate_rxu4", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 4, 1),
+	SG2042_GATE(GATE_CLK_RXU5, "clk_gate_rxu5", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 5, 1),
+	SG2042_GATE(GATE_CLK_RXU6, "clk_gate_rxu6", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 6, 1),
+	SG2042_GATE(GATE_CLK_RXU7, "clk_gate_rxu7", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 7, 1),
+	SG2042_GATE(GATE_CLK_RXU8, "clk_gate_rxu8", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 8, 1),
+	SG2042_GATE(GATE_CLK_RXU9, "clk_gate_rxu9", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 9, 1),
+	SG2042_GATE(GATE_CLK_RXU10, "clk_gate_rxu10", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 10, 1),
+	SG2042_GATE(GATE_CLK_RXU11, "clk_gate_rxu11", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 11, 1),
+	SG2042_GATE(GATE_CLK_RXU12, "clk_gate_rxu12", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 12, 1),
+	SG2042_GATE(GATE_CLK_RXU13, "clk_gate_rxu13", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 13, 1),
+	SG2042_GATE(GATE_CLK_RXU14, "clk_gate_rxu14", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 14, 1),
+	SG2042_GATE(GATE_CLK_RXU15, "clk_gate_rxu15", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 15, 1),
+	SG2042_GATE(GATE_CLK_RXU16, "clk_gate_rxu16", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 16, 1),
+	SG2042_GATE(GATE_CLK_RXU17, "clk_gate_rxu17", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 17, 1),
+	SG2042_GATE(GATE_CLK_RXU18, "clk_gate_rxu18", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 18, 1),
+	SG2042_GATE(GATE_CLK_RXU19, "clk_gate_rxu19", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 19, 1),
+	SG2042_GATE(GATE_CLK_RXU20, "clk_gate_rxu20", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 20, 1),
+	SG2042_GATE(GATE_CLK_RXU21, "clk_gate_rxu21", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 21, 1),
+	SG2042_GATE(GATE_CLK_RXU22, "clk_gate_rxu22", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 22, 1),
+	SG2042_GATE(GATE_CLK_RXU23, "clk_gate_rxu23", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 23, 1),
+	SG2042_GATE(GATE_CLK_RXU24, "clk_gate_rxu24", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 24, 1),
+	SG2042_GATE(GATE_CLK_RXU25, "clk_gate_rxu25", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 25, 1),
+	SG2042_GATE(GATE_CLK_RXU26, "clk_gate_rxu26", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 26, 1),
+	SG2042_GATE(GATE_CLK_RXU27, "clk_gate_rxu27", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 27, 1),
+	SG2042_GATE(GATE_CLK_RXU28, "clk_gate_rxu28", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 28, 1),
+	SG2042_GATE(GATE_CLK_RXU29, "clk_gate_rxu29", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 29, 1),
+	SG2042_GATE(GATE_CLK_RXU30, "clk_gate_rxu30", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 30, 1),
+	SG2042_GATE(GATE_CLK_RXU31, "clk_gate_rxu31", "clk_gate_rp_cpu_normal",
+		0, R_RP_RXU_CLK_ENABLE, 31, 1),
+
+	/* downstream of clk_gate_rp_cpu_normal about mp */
+	SG2042_GATE(GATE_CLK_MP0, "clk_gate_mp0", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP0_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP1, "clk_gate_mp1", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP1_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP2, "clk_gate_mp2", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP2_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP3, "clk_gate_mp3", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP3_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP4, "clk_gate_mp4", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP4_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP5, "clk_gate_mp5", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP5_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP6, "clk_gate_mp6", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP6_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP7, "clk_gate_mp7", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP7_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP8, "clk_gate_mp8", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP8_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP9, "clk_gate_mp9", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP9_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP10, "clk_gate_mp10", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP10_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP11, "clk_gate_mp11", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP11_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP12, "clk_gate_mp12", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP12_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP13, "clk_gate_mp13", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP13_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP14, "clk_gate_mp14", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP14_CONTROL_REG, 0, 1),
+	SG2042_GATE(GATE_CLK_MP15, "clk_gate_mp15", "clk_gate_rp_cpu_normal",
+		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP15_CONTROL_REG, 0, 1),
+};
+
+#define SG2042_MUX(_id, _name, _parent_names, _flags, _r_select, _shift, _width) { \
+		.id = _id,					\
+		.name = _name,					\
+		.parent_names = _parent_names,			\
+		.num_parents = ARRAY_SIZE(_parent_names),	\
+		.flags = _flags,				\
+		.offset_select = _r_select,			\
+		.shift = _shift,				\
+		.width = _width,				\
+	}
+
+/*
+ * Note: regarding names for mux clock, "0/1" or "div0/div1" means the
+ * first/second parent input source, not the register value.
+ * For example:
+ * "clk_div_ddr01_0" is the name of Clock divider 0 control of DDR01, and
+ * "clk_gate_ddr01_div0" is the gate clock in front of the "clk_div_ddr01_0",
+ * they are both controlled by register CLKDIVREG27;
+ * "clk_div_ddr01_1" is the name of Clock divider 1 control of DDR01, and
+ * "clk_gate_ddr01_div1" is the gate clock in front of the "clk_div_ddr01_1",
+ * they are both controlled by register CLKDIVREG28;
+ * While for register value of mux selection, use Clock Select for DDR01’s clock
+ * as example, see CLKSELREG0, bit[2].
+ * 1: Select in_dpll0_clk as clock source, correspondng to the parent input
+ *    source from "clk_div_ddr01_0".
+ * 0: Select in_fpll_clk as clock source, corresponding to the parent input
+ *    source from "clk_div_ddr01_1".
+ * So we need a table to define the array of register values corresponding to
+ * the parent index and tell CCF about this when registering mux clock.
+ */
+static const u32 sg2042_mux_table[] = {1, 0};
+
+static const char *const clk_mux_ddr01_p[] = {
+			"clk_div_ddr01_0", "clk_div_ddr01_1"};
+static const char *const clk_mux_ddr23_p[] = {
+			"clk_div_ddr23_0", "clk_div_ddr23_1"};
+static const char *const clk_mux_rp_cpu_normal_p[] = {
+			"clk_div_rp_cpu_normal_0", "clk_div_rp_cpu_normal_1"};
+static const char *const clk_mux_axi_ddr_p[] = {
+			"clk_div_axi_ddr_0", "clk_div_axi_ddr_1"};
+
+static struct sg2042_mux_clock sg2042_mux_clks[] = {
+	SG2042_MUX(MUX_CLK_DDR01, "clk_mux_ddr01", clk_mux_ddr01_p,
+		CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
+		R_CLKSELREG0, 2, 1),
+	SG2042_MUX(MUX_CLK_DDR23, "clk_mux_ddr23", clk_mux_ddr23_p,
+		CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
+		R_CLKSELREG0, 3, 1),
+	SG2042_MUX(MUX_CLK_RP_CPU_NORMAL, "clk_mux_rp_cpu_normal", clk_mux_rp_cpu_normal_p,
+		CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+		R_CLKSELREG0, 0, 1),
+	SG2042_MUX(MUX_CLK_AXI_DDR, "clk_mux_axi_ddr", clk_mux_axi_ddr_p,
+		CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+		R_CLKSELREG0, 1, 1),
+};
+
+static DEFINE_SPINLOCK(sg2042_clk_lock);
+
+static int sg2042_clk_register_plls(struct sg2042_clk_data *clk_data,
+				   struct sg2042_pll_clock pll_clks[],
+				   int num_pll_clks)
+{
+	struct clk_hw *hw;
+	struct sg2042_pll_clock *pll;
+	int i, ret = 0;
+
+	for (i = 0; i < num_pll_clks; i++) {
+		pll = &(pll_clks[i]);
+		/* assign these for ops usage during registration */
+		pll->map = clk_data->regmap_syscon;
+		pll->lock = &sg2042_clk_lock;
+
+		hw = &pll->hw;
+		ret = clk_hw_register(NULL, hw);
+		if (ret) {
+			pr_err("failed to register clock %s\n", pll->name);
+			break;
+		}
+
+		clk_data->onecell_data.hws[pll->id] = hw;
+	}
+
+	/* leave unregister to outside if failed */
+	return ret;
+}
+
+static int sg2042_clk_register_divs(struct sg2042_clk_data *clk_data,
+				   struct sg2042_divider_clock div_clks[],
+				   int num_div_clks)
+{
+	struct clk_hw *hw;
+	struct sg2042_divider_clock *div;
+	int i, val, ret = 0;
+
+	for (i = 0; i < num_div_clks; i++) {
+		div = &(div_clks[i]);
+
+		if (div->div_flags & CLK_DIVIDER_HIWORD_MASK) {
+			if (div->width + div->shift > 16) {
+				pr_warn("divider value exceeds LOWORD field\n");
+				ret = -EINVAL;
+				break;
+			}
+		}
+
+		div->reg = clk_data->iobase + div->offset_ctrl;
+		div->lock = &sg2042_clk_lock;
+
+		hw = &div->hw;
+		ret = clk_hw_register(NULL, hw);
+		if (ret) {
+			pr_err("failed to register clock %s\n", div->name);
+			break;
+		}
+
+		clk_data->onecell_data.hws[div->id] = hw;
+
+		if (div->initial_val >= 0) {
+			val = readl(div->reg);
+
+			/*
+			 * set a default divider factor,
+			 * clk driver should not select divider clock as the
+			 * clock source, before set the divider by right process
+			 * (assert div, set div factor, de assert div).
+			 */
+			if (div->initial_val > 0)
+				val |= (div->initial_val << 16 | 1 << 3);
+			else {
+				/*
+				 * the div register is config to use divider
+				 * factor, don't change divider
+				 */
+				if (!(val >> 3 & 0x1))
+					val |= 1 << 16;
+			}
+
+			writel(val, div->reg);
+		}
+	}
+
+	/* leave unregister to outside if failed */
+	return ret;
+}
+
+static int sg2042_clk_register_gates(struct sg2042_clk_data *clk_data,
+				    const struct sg2042_gate_clock gate_clks[],
+				    int num_gate_clks)
+{
+	struct clk_hw *hw;
+	const struct sg2042_gate_clock *gate;
+	int i, ret = 0;
+	void __iomem *reg;
+
+	for (i = 0; i < num_gate_clks; i++) {
+		gate = &(gate_clks[i]);
+		if (gate->flag_sysctrl)
+			reg = clk_data->iobase_syscon + gate->offset_enable;
+		else
+			reg = clk_data->iobase + gate->offset_enable;
+		hw = clk_hw_register_gate(
+			NULL,
+			gate->name,
+			gate->parent_name,
+			gate->flags,
+			reg,
+			gate->bit_idx,
+			0,
+			&sg2042_clk_lock);
+		if (IS_ERR(hw)) {
+			pr_err("failed to register clock %s\n", gate->name);
+			ret = PTR_ERR(hw);
+			break;
+		}
+
+		clk_data->onecell_data.hws[gate->id] = hw;
+	}
+
+	/* leave unregister to outside if failed */
+	return ret;
+}
+
+static int sg2042_mux_notifier_cb(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	int ret = 0;
+	struct clk_notifier_data *ndata = data;
+	struct clk_hw *hw = __clk_get_hw(ndata->clk);
+	const struct clk_ops *ops = &clk_mux_ops;
+	struct sg2042_mux_clock *mux = to_sg2042_mux_nb(nb);
+
+	/* To switch to fpll before changing rate and restore after that */
+	if (event == PRE_RATE_CHANGE) {
+		mux->original_index = ops->get_parent(hw);
+
+		/*
+		 * "1" is the array index of the second parent input source of
+		 * mux. For SG2042, it's fpll for all mux clocks.
+		 * "0" is the array index of the frist parent input source of
+		 * mux, For SG2042, it's mpll.
+		 * FIXME, any good idea to avoid magic number?
+		 */
+		if (mux->original_index == 0)
+			ret = ops->set_parent(hw, 1);
+	} else if (event == POST_RATE_CHANGE) {
+		ret = ops->set_parent(hw, mux->original_index);
+	}
+
+	return notifier_from_errno(ret);
+}
+
+static int sg2042_clk_register_muxs(struct sg2042_clk_data *clk_data,
+				   struct sg2042_mux_clock mux_clks[],
+				   int num_mux_clks)
+{
+	struct clk_hw *hw;
+	struct sg2042_mux_clock *mux;
+	int i, ret = 0;
+
+	for (i = 0; i < num_mux_clks; i++) {
+		mux = &(mux_clks[i]);
+
+		hw = clk_hw_register_mux_table(
+			NULL,
+			mux->name,
+			mux->parent_names,
+			mux->num_parents,
+			mux->flags,
+			clk_data->iobase + mux->offset_select,
+			mux->shift,
+			BIT(mux->width) - 1,
+			0,
+			sg2042_mux_table,
+			&sg2042_clk_lock);
+		if (IS_ERR(hw)) {
+			pr_err("failed to register clock %s\n", mux->name);
+			ret = PTR_ERR(hw);
+			break;
+		}
+
+		clk_data->onecell_data.hws[mux->id] = hw;
+
+		/*
+		 * FIXME: Theoretically, we should set parent for the
+		 * mux, but seems hardware has done this for us with
+		 * default value, so we don't set parent again here.
+		 */
+
+		if (!(mux->flags & CLK_MUX_READ_ONLY)) {
+			mux->clk_nb.notifier_call = sg2042_mux_notifier_cb;
+			ret = clk_notifier_register(hw->clk, &(mux->clk_nb));
+			if (ret) {
+				pr_err("failed to register clock notifier for %s\n",
+					mux->name);
+				goto error_cleanup;
+			}
+		}
+	}
+
+	return 0;
+
+error_cleanup:
+	/* unregister notifier and release the memory allocated */
+	for (i = 0; i < num_mux_clks; i++) {
+		mux = &(mux_clks[i]);
+
+		hw = clk_data->onecell_data.hws[mux->id];
+
+		if (hw != NULL)
+			clk_notifier_unregister(hw->clk, &(mux->clk_nb));
+	}
+
+	/* leave clk unregister to outside if failed */
+	return ret;
+}
+
+static int __init sg2042_clk_init_clk_data(
+	struct device_node *node,
+	int num_clks,
+	struct sg2042_clk_data **pp_clk_data)
+{
+	int ret = 0;
+	struct sg2042_clk_data *clk_data = NULL;
+	struct device_node *np_syscon;
+
+	np_syscon = of_parse_phandle(node, "sophgo,system-ctrl", 0);
+	if (!np_syscon) {
+		pr_err("failed to get system-ctrl node\n");
+		ret = -EINVAL;
+		goto error_out;
+	}
+
+	clk_data = kzalloc(struct_size(clk_data, onecell_data.hws, num_clks), GFP_KERNEL);
+	if (!clk_data) {
+		ret = -ENOMEM;
+		goto error_out;
+	}
+
+	clk_data->regmap_syscon = device_node_to_regmap(np_syscon);
+	if (IS_ERR_OR_NULL(clk_data->regmap_syscon)) {
+		pr_err("cannot get regmap_syscon %ld\n", PTR_ERR(clk_data->regmap_syscon));
+		ret = -ENODEV;
+		goto cleanup;
+	}
+	clk_data->iobase_syscon = of_iomap(np_syscon, 0);
+	clk_data->iobase = of_iomap(node, 0);
+	clk_data->onecell_data.num = num_clks;
+
+	*pp_clk_data = clk_data;
+	return ret;
+
+cleanup:
+	kfree(clk_data);
+
+error_out:
+	return ret;
+}
+
+static void __init sg2042_clk_init(struct device_node *node)
+{
+	struct sg2042_clk_data *clk_data = NULL;
+	int i, ret = 0;
+	int num_clks = 0;
+
+	num_clks = ARRAY_SIZE(sg2042_pll_clks) +
+		   ARRAY_SIZE(sg2042_div_clks) +
+		   ARRAY_SIZE(sg2042_gate_clks) +
+		   ARRAY_SIZE(sg2042_mux_clks);
+	if (num_clks == 0) {
+		ret = -EINVAL;
+		goto error_out;
+	}
+
+	ret = sg2042_clk_init_clk_data(node, num_clks, &clk_data);
+	if (ret < 0)
+		goto error_out;
+
+	ret = sg2042_clk_register_plls(clk_data, sg2042_pll_clks,
+				ARRAY_SIZE(sg2042_pll_clks));
+	if (ret)
+		goto cleanup;
+
+	ret = sg2042_clk_register_divs(clk_data, sg2042_div_clks,
+				ARRAY_SIZE(sg2042_div_clks));
+	if (ret)
+		goto cleanup;
+
+	ret = sg2042_clk_register_gates(clk_data, sg2042_gate_clks,
+				ARRAY_SIZE(sg2042_gate_clks));
+	if (ret)
+		goto cleanup;
+
+	ret = sg2042_clk_register_muxs(clk_data, sg2042_mux_clks,
+				ARRAY_SIZE(sg2042_mux_clks));
+	if (ret)
+		goto cleanup;
+
+	ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, &clk_data->onecell_data);
+	if (ret)
+		goto cleanup;
+
+	return;
+
+cleanup:
+	for (i = 0; i < num_clks; i++) {
+		if (clk_data->onecell_data.hws[i] != NULL)
+			clk_hw_unregister(clk_data->onecell_data.hws[i]);
+	}
+	kfree(clk_data);
+
+error_out:
+	pr_err("%s failed error number %d\n", __func__, ret);
+}
+
+CLK_OF_DECLARE(sg2042_clk, "sophgo,sg2042-clkgen", sg2042_clk_init);
diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.h b/drivers/clk/sophgo/clk-sophgo-sg2042.h
new file mode 100644
index 000000000000..651d93033547
--- /dev/null
+++ b/drivers/clk/sophgo/clk-sophgo-sg2042.h
@@ -0,0 +1,226 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __CLK_SOPHGO_SG2042_H
+#define __CLK_SOPHGO_SG2042_H
+
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+/* Registers defined in SYS_CTRL */
+#define R_PLL_STAT		0xC0
+#define R_PLL_CLKEN_CONTROL	0xC4
+#define R_MPLL_CONTROL		0xE8
+#define R_FPLL_CONTROL		0xF4
+#define R_DPLL0_CONTROL		0xF8
+#define R_DPLL1_CONTROL		0xFC
+
+#define R_RP_RXU_CLK_ENABLE	0x0368
+#define R_MP0_STATUS_REG	0x0380
+#define R_MP0_CONTROL_REG	0x0384
+#define R_MP1_STATUS_REG	0x0388
+#define R_MP1_CONTROL_REG	0x038C
+#define R_MP2_STATUS_REG	0x0390
+#define R_MP2_CONTROL_REG	0x0394
+#define R_MP3_STATUS_REG	0x0398
+#define R_MP3_CONTROL_REG	0x039C
+#define R_MP4_STATUS_REG	0x03A0
+#define R_MP4_CONTROL_REG	0x03A4
+#define R_MP5_STATUS_REG	0x03A8
+#define R_MP5_CONTROL_REG	0x03AC
+#define R_MP6_STATUS_REG	0x03B0
+#define R_MP6_CONTROL_REG	0x03B4
+#define R_MP7_STATUS_REG	0x03B8
+#define R_MP7_CONTROL_REG	0x03BC
+#define R_MP8_STATUS_REG	0x03C0
+#define R_MP8_CONTROL_REG	0x03C4
+#define R_MP9_STATUS_REG	0x03C8
+#define R_MP9_CONTROL_REG	0x03CC
+#define R_MP10_STATUS_REG	0x03D0
+#define R_MP10_CONTROL_REG	0x03D4
+#define R_MP11_STATUS_REG	0x03D8
+#define R_MP11_CONTROL_REG	0x03DC
+#define R_MP12_STATUS_REG	0x03E0
+#define R_MP12_CONTROL_REG	0x03E4
+#define R_MP13_STATUS_REG	0x03E8
+#define R_MP13_CONTROL_REG	0x03EC
+#define R_MP14_STATUS_REG	0x03F0
+#define R_MP14_CONTROL_REG	0x03F4
+#define R_MP15_STATUS_REG	0x03F8
+#define R_MP15_CONTROL_REG	0x03FC
+
+/* Registers defined in CLOCK */
+#define R_CLKENREG0		0x00
+#define R_CLKENREG1		0x04
+#define R_CLKSELREG0		0x20
+#define R_CLKDIVREG0		0x40
+#define R_CLKDIVREG1		0x44
+#define R_CLKDIVREG2		0x48
+#define R_CLKDIVREG3		0x4C
+#define R_CLKDIVREG4		0x50
+#define R_CLKDIVREG5		0x54
+#define R_CLKDIVREG6		0x58
+#define R_CLKDIVREG7		0x5C
+#define R_CLKDIVREG8		0x60
+#define R_CLKDIVREG9		0x64
+#define R_CLKDIVREG10		0x68
+#define R_CLKDIVREG11		0x6C
+#define R_CLKDIVREG12		0x70
+#define R_CLKDIVREG13		0x74
+#define R_CLKDIVREG14		0x78
+#define R_CLKDIVREG15		0x7C
+#define R_CLKDIVREG16		0x80
+#define R_CLKDIVREG17		0x84
+#define R_CLKDIVREG18		0x88
+#define R_CLKDIVREG19		0x8C
+#define R_CLKDIVREG20		0x90
+#define R_CLKDIVREG21		0x94
+#define R_CLKDIVREG22		0x98
+#define R_CLKDIVREG23		0x9C
+#define R_CLKDIVREG24		0xA0
+#define R_CLKDIVREG25		0xA4
+#define R_CLKDIVREG26		0xA8
+#define R_CLKDIVREG27		0xAC
+#define R_CLKDIVREG28		0xB0
+#define R_CLKDIVREG29		0xB4
+#define R_CLKDIVREG30		0xB8
+
+/*
+ * clock common data
+ * @iobase: address of clock-controller
+ * @iobase_syscon & @regmap_syscon: point to the same address of system-controller,
+ *  the reason we use two different type of pointer just due to PLL uses
+ *  regmap while others use iomem.
+ * @lock: clock register access lock
+ * @onecell_data: used for adding providers.
+ */
+struct sg2042_clk_data {
+	void __iomem *iobase;
+	void __iomem *iobase_syscon;
+	struct regmap *regmap_syscon;
+	struct clk_hw_onecell_data onecell_data;
+};
+
+/*
+ * PLL clock
+ * @id:				used to map clk_onecell_data
+ * @name:			used for print even when clk registration failed
+ * @map:			used for regmap read/write, regmap is more useful
+ *				then iomem address when we have multiple offsets
+ *				for different registers.
+ *				NOTE: PLL registers are all in SYS_CTRL!
+ * @lock:			spinlock to protect register access
+ * @offset_status:		offset of pll status registers
+ * @offset_enable:		offset of pll enable registers
+ * @offset_ctrl:		offset of pll control registers
+ * @shift_status_lock:		shift of XXX_LOCK in pll status register
+ * @shift_status_updating:	shift of UPDATING_XXX in pll status register
+ * @shift_enable:		shift of XXX_CLK_EN in pll enable register
+ */
+struct sg2042_pll_clock {
+	struct clk_hw	hw;
+
+	/* private data */
+	unsigned int id;
+	const char *name;
+
+	struct regmap *map;
+	spinlock_t *lock;
+
+	u32 offset_status;
+	u32 offset_enable;
+	u32 offset_ctrl;
+	u8 shift_status_lock;
+	u8 shift_status_updating;
+	u8 shift_enable;
+};
+
+#define to_sg2042_pll_clk(_hw) container_of(_hw, struct sg2042_pll_clock, hw)
+
+/*
+ * Divider clock
+ * @id:			used to map clk_onecell_data
+ * @name:		used for print even when clk registration failed
+ * @reg:		used for readl/writel.
+ *			NOTE: DIV registers are ALL in CLOCK!
+ * @lock:		spinlock to protect register access
+ * @offset_ctrl:	offset of divider control registers
+ * @shift:		shift of "Clock Divider Factor" in divider control register
+ * @width:		width of "Clock Divider Factor" in divider control register
+ * @div_flags:		private flags for this clock, not for framework-specific
+ * @initial_val:	initial value of the divider, a value < 0 means ignoring
+ *			setting of initial value.
+ * @table:		the div table that the divider supports
+ */
+struct sg2042_divider_clock {
+	struct clk_hw	hw;
+
+	/* private data */
+	unsigned int id;
+	const char *name;
+
+	void __iomem *reg;
+	spinlock_t *lock;
+
+	unsigned long offset_ctrl;
+	u8 shift;
+	u8 width;
+	u8 div_flags;
+	s32 initial_val;
+	struct clk_div_table *table;
+};
+
+#define to_sg2042_clk_divider(_hw)	\
+	container_of(_hw, struct sg2042_divider_clock, hw)
+
+/*
+ * Gate clock
+ * @id:			used to map clk_onecell_data
+ * @name:		string of this clock name
+ * @parent_name:	string of parent clock name
+ * @flags:		framework-specific flags for this clock
+ * @offset_enable:	offset of gate enable registers
+ * @bit_idx:		which bit in the register controls gating of this clock
+ * @flag_sysctrl:	flag if this clock is controlled by registers defined
+ *			in SYS_CTRL, 1: yes, 0: no, it's in CLOCK.
+ *			NOTE: Gate registers are scattered in SYS_CTRL and CLOCK!
+ */
+struct sg2042_gate_clock {
+	unsigned int id;
+	const char *name;
+	const char *parent_name;
+	unsigned long flags;
+	unsigned long offset_enable;
+	u8 bit_idx;
+	u8 flag_sysctrl;
+};
+
+/*
+ * Mux clock
+ * @id:			used to map clk_onecell_data
+ * @name:		string of this clock name
+ * @parent_name:	string array of parents' clock name
+ * @flags:		framework-specific flags for this clock
+ * @offset_select:	offset of mux selection registers
+ *			NOTE: MUX registers are ALL in CLOCK!
+ * @shift:		shift of "Clock Select" in mux selection register
+ * @width:		width of "Clock Select" in mux selection register
+ * @clk_nb:		used for notification
+ * @original_index:	set by notifier callback
+ */
+struct sg2042_mux_clock {
+	unsigned int id;
+	const char *name;
+	const char * const *parent_names;
+	u8 num_parents;
+	unsigned long flags;
+	unsigned long offset_select;
+	u8 shift;
+	u8 width;
+	struct notifier_block clk_nb;
+	u8 original_index;
+};
+
+#define to_sg2042_mux_nb(_nb) container_of(_nb, struct sg2042_mux_clock, clk_nb)
+
+#endif /* __CLK_SOPHGO_SG2042_H */
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 57880 bytes --]

On Fri, Dec 08, 2023 at 09:14:32AM +0800, Chen Wang wrote:

> +#define div_mask(width) ((1 << (width)) - 1)

Looks like this should be genmask.

> +#define ENCODE_PLL_CTRL(fbdiv, p1, p2, refdiv) \
> +	(((fbdiv & 0xfff) << 16) | ((p2 & 0x7) << 12) | ((p1 & 0x7) << 8) | (refdiv & 0x3f))

IMO this should be a function not a macro.

> +
> +static inline int __sg2042_pll_enable(struct sg2042_pll_clock *pll, bool en)

Why the __ prefixing of function names btw?

> +{
> +	unsigned int value = 0;
> +	unsigned long enter;
> +	struct regmap *map = pll->map;
> +
> +	if (en) {
> +		/* wait pll lock */
> +		enter = jiffies;
> +		regmap_read(map, pll->offset_status, &value);
> +		while (!((value >> pll->shift_status_lock) & 0x1)) {
> +			regmap_read(map, pll->shift_status_lock, &value);
> +			if (time_after(jiffies, enter + HZ / 10))
> +				pr_warn("%s not locked\n", pll->name);
> +		}

Can't you just use read_poll_timeout()?
https://elixir.bootlin.com/linux/latest/source/include/linux/iopoll.h#L16

> +		/* wait pll updating */
> +		enter = jiffies;
> +		regmap_read(map, pll->shift_status_updating, &value);
> +		while (((value >> pll->shift_status_updating) & 0x1)) {
> +			regmap_read(map, pll->shift_status_updating, &value);
> +			if (time_after(jiffies, enter + HZ / 10))
> +				pr_warn("%s still updating\n", pll->name);
> +		}
> +		/* enable pll */
> +		regmap_read(map, pll->offset_enable, &value);
> +		regmap_write(map, pll->offset_enable, value | (1 << pll->shift_enable));
> +	} else {
> +		/* disable pll */
> +		regmap_read(map, pll->offset_enable, &value);
> +		regmap_write(map, pll->offset_enable, value & (~(1 << pll->shift_enable)));
> +	}
> +
> +	return 0;
> +}
> +

> +static unsigned int __sg2042_get_table_div(
> +	const struct clk_div_table *table,
> +	unsigned int val)
> +{
> +	const struct clk_div_table *clkt;
> +
> +	for (clkt = table; clkt->div; clkt++)
> +		if (clkt->val == val)
> +			return clkt->div;
> +	return 0;
> +}
> +
> +static unsigned int __sg2042_get_div(
> +	const struct clk_div_table *table,
> +	unsigned int val,
> +	unsigned long flags, u8 width)
> +{
> +	if (flags & CLK_DIVIDER_ONE_BASED)
> +		return val;
> +	if (flags & CLK_DIVIDER_POWER_OF_TWO)
> +		return 1 << val;
> +	if (flags & CLK_DIVIDER_MAX_AT_ZERO)
> +		return val ? val : div_mask(width) + 1;
> +	if (table)
> +		return __sg2042_get_table_div(table, val);
> +	return val + 1;
> +}

Are these not effectively the same as clk_divider's ops?

> +
> +/*
> + * @reg_value: current register value
> + * @parent_rate: parent frequency
> + *
> + * This function is used to calculate below "rate" in equation
> + * rate = (parent_rate/REFDIV) x FBDIV/POSTDIV1/POSTDIV2
> + *      = (parent_rate x FBDIV) / (REFDIV x POSTDIV1 x POSTDIV2)
> + */
> +static unsigned long __sg2042_pll_recalc_rate(
> +	unsigned int reg_value,
> +	unsigned long parent_rate)
> +{
> +	unsigned int fbdiv, refdiv;
> +	unsigned int postdiv1, postdiv2;
> +	u64 rate, numerator, denominator;
> +
> +	fbdiv = (reg_value >> 16) & 0xfff;
> +	refdiv = reg_value & 0x3f;
> +	postdiv1 = (reg_value >> 8) & 0x7;
> +	postdiv2 = (reg_value >> 12) & 0x7;

IMO all of these are opportunities for GENMASK and defines.

> +
> +	numerator = parent_rate * fbdiv;
> +	denominator = refdiv * postdiv1 * postdiv2;
> +	do_div(numerator, denominator);
> +	rate = numerator;
> +
> +	return rate;
> +}
> +
> +/*
> + * Below array is the total combination lists of POSTDIV1 and POSTDIV2
> + * for example:
> + * postdiv1_2[0] = {2, 4, 8}
> + *           ==> div1 = 2, div2 = 4 , div1 * div2 = 8
> + * And POSTDIV_RESULT_INDEX point to 3rd element in the array
> + */
> +#define	POSTDIV_RESULT_INDEX	2
> +static int postdiv1_2[][3] = {
> +	{2, 4,  8}, {3, 3,  9}, {2, 5, 10}, {2, 6, 12},
> +	{2, 7, 14}, {3, 5, 15}, {4, 4, 16}, {3, 6, 18},
> +	{4, 5, 20}, {3, 7, 21}, {4, 6, 24}, {5, 5, 25},
> +	{4, 7, 28}, {5, 6, 30}, {5, 7, 35}, {6, 6, 36},
> +	{6, 7, 42}, {7, 7, 49}
> +};
> +
> +/*
> + * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
> + * to get the closest postdiiv combination.
> + * @rate: FOUTPOSTDIV
> + * @prate: parent rate, i.e. FREF
> + * @fbdiv: FBDIV
> + * @refdiv: REFDIV
> + * @postdiv1: POSTDIV1, output
> + * @postdiv2: POSTDIV2, output
> + * See TRM:
> + * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
> + * So we get following formula to get POSTDIV1 and POSTDIV2:
> + * POSTDIV = (prate/REFDIV) x FBDIV/rate
> + * above POSTDIV = POSTDIV1*POSTDIV2
> + */
> +static int __sg2042_pll_get_postdiv_1_2(
> +	unsigned long rate,
> +	unsigned long prate,
> +	unsigned int fbdiv,
> +	unsigned int refdiv,
> +	unsigned int *postdiv1,
> +	unsigned int *postdiv2)

This is not the coding style btw.

> +{
> +	int index = 0;
> +	int ret = 0;
> +	u64 tmp0;
> +
> +	/* prate/REFDIV and result save to tmp0 */
> +	tmp0 = prate;
> +	do_div(tmp0, refdiv);
> +
> +	/* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
> +	tmp0 *= fbdiv;
> +
> +	/* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
> +	do_div(tmp0, rate);
> +
> +	/* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
> +	if (tmp0 <= 7) {
> +		/* (div1 * div2) <= 7, no need to use array search */
> +		*postdiv1 = tmp0;
> +		*postdiv2 = 1;
> +	} else {
> +		/* (div1 * div2) > 7, use array search */
> +		for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
> +			if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
> +				continue;
> +			} else {
> +				/* found it */
> +				break;
> +			}
> +		}
> +		if (index < ARRAY_SIZE(postdiv1_2)) {
> +			*postdiv1 = postdiv1_2[index][1];
> +			*postdiv2 = postdiv1_2[index][0];
> +		} else {
> +			pr_debug("%s can not find in postdiv array!\n", __func__);
> +			ret = -EINVAL;
> +		}
> +	}
> +
> +	return ret;
> +}

Reading this function it makes me wonder if (and I am far from the best
person to comment, someone like Stephen is vastly more qualified) you
should model this as several "stages", each implemented by the
"standard" clocks - like clk_divider etc. The code here is quite
complicated IMO as it seems to be trying to implement several stages of
division in one go.

There's quite a lot in the driver and I will admit that I have not read
it all my any means (I skimmed from here onwards), but in general my
advice would be to try and reuse the generic code as much as possible.

Thanks,
Conor.


> +
> +#define KHZ 1000UL
> +#define MHZ (KHZ * KHZ)
> +
> +#define REFDIV_MIN 1
> +#define REFDIV_MAX 63
> +#define FBDIV_MIN 16
> +#define FBDIV_MAX 320
> +
> +#define PLL_FREF_SG2042 (25 * MHZ)
> +
> +#define PLL_FOUTPOSTDIV_MIN (16 * MHZ)
> +#define PLL_FOUTPOSTDIV_MAX (3200 * MHZ)
> +
> +#define PLL_FOUTVCO_MIN (800 * MHZ)
> +#define PLL_FOUTVCO_MAX (3200 * MHZ)
> +
> +struct sg2042_pll_ctrl {
> +	unsigned long freq;
> +	unsigned int fbdiv;
> +	unsigned int postdiv1;
> +	unsigned int postdiv2;
> +	unsigned int refdiv;
> +};
> +
> +/*
> + * Based on the given FOUTPISTDIV and the input FREF to calculate
> + * the REFDIV/FBDIV/PSTDIV1/POSTDIV2 combination for pllctrl register.
> + * @req_rate: expected output clock rate, i.e. FOUTPISTDIV
> + * @parent_rate: input parent clock rate, i.e. FREF
> + * @best: output to hold calculated combination of REFDIV/FBDIV/PSTDIV1/POSTDIV2
> + */
> +static int __sg2042_get_pll_ctl_setting(
> +	struct sg2042_pll_ctrl *best,
> +	unsigned long req_rate,
> +	unsigned long parent_rate)
> +{
> +	int ret;
> +	unsigned int fbdiv, refdiv, postdiv1, postdiv2;
> +	unsigned long foutpostdiv;
> +	u64 tmp;
> +	u64 foutvco;
> +
> +	if (parent_rate != PLL_FREF_SG2042) {
> +		pr_alert("INVALID FREF: %ld\n", parent_rate);
> +		return -EINVAL;
> +	}
> +
> +	if (req_rate < PLL_FOUTPOSTDIV_MIN || req_rate > PLL_FOUTPOSTDIV_MAX) {
> +		pr_alert("INVALID FOUTPOSTDIV: %ld\n", req_rate);
> +		return -EINVAL;
> +	}
> +
> +	memset(best, 0, sizeof(struct sg2042_pll_ctrl));
> +
> +	for (refdiv = REFDIV_MIN; refdiv < REFDIV_MAX + 1; refdiv++) {
> +		/* required by hardware: FREF/REFDIV must > 10 */
> +		tmp = parent_rate;
> +		do_div(tmp, refdiv);
> +		if (tmp <= 10)
> +			continue;
> +
> +		for (fbdiv = FBDIV_MIN; fbdiv < FBDIV_MAX + 1; fbdiv++) {
> +			/*
> +			 * FOUTVCO = FREF*FBDIV/REFDIV validation
> +			 * required by hardware, FOUTVCO must [800MHz, 3200MHz]
> +			 */
> +			foutvco = parent_rate * fbdiv;
> +			do_div(foutvco, refdiv);
> +			if (foutvco < PLL_FOUTVCO_MIN || foutvco > PLL_FOUTVCO_MAX)
> +				continue;
> +
> +			ret = __sg2042_pll_get_postdiv_1_2(
> +				req_rate, parent_rate, fbdiv, refdiv,
> +				&postdiv1, &postdiv2);
> +			if (ret)
> +				continue;
> +
> +			/*
> +			 * FOUTPOSTDIV = FREF*FBDIV/REFDIV/(POSTDIV1*POSTDIV2)
> +			 *             = FOUTVCO/(POSTDIV1*POSTDIV2)
> +			 */
> +			tmp = foutvco;
> +			do_div(tmp, (postdiv1 * postdiv2));
> +			foutpostdiv = (unsigned long)tmp;
> +			/* Iterative to approach the expected value */
> +			if (abs_diff(foutpostdiv, req_rate) <
> +			    abs_diff(best->freq, req_rate)) {
> +				best->freq = foutpostdiv;
> +				best->refdiv = refdiv;
> +				best->fbdiv = fbdiv;
> +				best->postdiv1 = postdiv1;
> +				best->postdiv2 = postdiv2;
> +				if (foutpostdiv == req_rate)
> +					return 0;
> +			}
> +			continue;
> +		}
> +	}
> +
> +	if (best->freq == 0)
> +		return -EINVAL;
> +	else
> +		return 0;
> +}
> +
> +/*
> + * @hw: ccf use to hook get sg2042_pll_clock
> + * @parent_rate: parent rate
> + *
> + * The is function will be called through clk_get_rate
> + * and return current rate after decoding reg value
> + */
> +static unsigned long sg2042_clk_pll_recalc_rate(
> +	struct clk_hw *hw,
> +	unsigned long parent_rate)
> +{
> +	unsigned int value;
> +	unsigned long rate;
> +	struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
> +
> +	regmap_read(pll->map, pll->offset_ctrl, &value);
> +	rate = __sg2042_pll_recalc_rate(value, parent_rate);
> +
> +	pr_debug("--> %s: pll_recalc_rate: val = %ld\n",
> +		clk_hw_get_name(hw), rate);
> +	return rate;
> +}
> +
> +static long sg2042_clk_pll_round_rate(
> +	struct clk_hw *hw,
> +	unsigned long req_rate,
> +	unsigned long *prate)
> +{
> +	unsigned int value;
> +	struct sg2042_pll_ctrl pctrl_table;
> +	long proper_rate;
> +	int ret;
> +
> +	ret = __sg2042_get_pll_ctl_setting(&pctrl_table, req_rate, *prate);
> +	if (ret) {
> +		proper_rate = 0;
> +		goto out;
> +	}
> +
> +	value = ENCODE_PLL_CTRL(pctrl_table.fbdiv, pctrl_table.postdiv1,
> +			     pctrl_table.postdiv2, pctrl_table.refdiv);
> +	proper_rate = (long)__sg2042_pll_recalc_rate(value, *prate);
> +
> +out:
> +	pr_debug("--> %s: pll_round_rate: val = %ld\n",
> +		clk_hw_get_name(hw), proper_rate);
> +	return proper_rate;
> +}
> +
> +static int sg2042_clk_pll_determine_rate(
> +	struct clk_hw *hw,
> +	struct clk_rate_request *req)
> +{
> +	req->rate = sg2042_clk_pll_round_rate(hw, min(req->rate, req->max_rate),
> +					  &req->best_parent_rate);
> +	pr_debug("--> %s: pll_determine_rate: val = %ld\n",
> +		clk_hw_get_name(hw), req->rate);
> +	return 0;
> +}
> +
> +static int sg2042_clk_pll_set_rate(
> +	struct clk_hw *hw,
> +	unsigned long rate,
> +	unsigned long parent_rate)
> +{
> +	unsigned long flags;
> +	unsigned int value;
> +	int ret = 0;
> +	struct sg2042_pll_ctrl pctrl_table;
> +	struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
> +
> +	spin_lock_irqsave(pll->lock, flags);
> +	if (__sg2042_pll_enable(pll, 0)) {
> +		pr_warn("Can't disable pll(%s), status error\n", pll->name);
> +		goto out;
> +	}
> +	ret = __sg2042_get_pll_ctl_setting(&pctrl_table, rate, parent_rate);
> +	if (ret) {
> +		pr_warn("%s: Can't find a proper pll setting\n", pll->name);
> +		goto out2;
> +	}
> +
> +	value = ENCODE_PLL_CTRL(pctrl_table.fbdiv, pctrl_table.postdiv1,
> +			     pctrl_table.postdiv2, pctrl_table.refdiv);
> +
> +	/* write the value to top register */
> +	regmap_write(pll->map, pll->offset_ctrl, value);
> +
> +out2:
> +	__sg2042_pll_enable(pll, 1);
> +out:
> +	spin_unlock_irqrestore(pll->lock, flags);
> +
> +	pr_debug("--> %s: pll_set_rate: val = 0x%x\n",
> +		clk_hw_get_name(hw), value);
> +	return ret;
> +}
> +
> +static unsigned long sg2042_clk_divider_recalc_rate(
> +	struct clk_hw *hw,
> +	unsigned long parent_rate)
> +{
> +	struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> +	unsigned int val;
> +	unsigned long ret_rate;
> +
> +	val = readl(divider->reg) >> divider->shift;
> +	val &= div_mask(divider->width);
> +
> +	ret_rate = divider_recalc_rate(hw, parent_rate, val, divider->table,
> +				   divider->div_flags, divider->width);
> +
> +	pr_debug("--> %s: divider_recalc_rate: val = %ld\n",
> +		clk_hw_get_name(hw), ret_rate);
> +	return ret_rate;
> +}
> +
> +static long sg2042_clk_divider_round_rate(
> +	struct clk_hw *hw,
> +	unsigned long rate,
> +	unsigned long *prate)
> +{
> +	int bestdiv;
> +	unsigned long ret_rate;
> +	struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> +
> +	/* if read only, just return current value */
> +	if (divider->div_flags & CLK_DIVIDER_READ_ONLY) {
> +		bestdiv = readl(divider->reg) >> divider->shift;
> +		bestdiv &= div_mask(divider->width);
> +		bestdiv = __sg2042_get_div(divider->table, bestdiv, divider->div_flags,
> +				   divider->width);
> +		ret_rate = DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
> +	} else {
> +		ret_rate = divider_round_rate(hw, rate, prate, divider->table,
> +				  divider->width, divider->div_flags);
> +	}
> +
> +	pr_debug("--> %s: divider_round_rate: val = %ld\n",
> +		clk_hw_get_name(hw), ret_rate);
> +	return ret_rate;
> +}
> +
> +static int sg2042_clk_divider_set_rate(
> +	struct clk_hw *hw,
> +	unsigned long rate,
> +	unsigned long parent_rate)
> +{
> +	unsigned int value;
> +	unsigned int val, val2;
> +	unsigned long flags = 0;
> +	struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> +
> +	value = divider_get_val(rate, parent_rate, divider->table,
> +				divider->width, divider->div_flags);
> +
> +	if (divider->lock)
> +		spin_lock_irqsave(divider->lock, flags);
> +	else
> +		__acquire(divider->lock);
> +
> +	/* div assert */
> +	val = readl(divider->reg);
> +	val &= ~0x1;
> +	writel(val, divider->reg);
> +
> +	if (divider->div_flags & CLK_DIVIDER_HIWORD_MASK) {
> +		val = div_mask(divider->width) << (divider->shift + 16);
> +	} else {
> +		val = readl(divider->reg);
> +		val &= ~(div_mask(divider->width) << divider->shift);
> +	}
> +
> +	val |= value << divider->shift;
> +	writel(val, divider->reg);
> +	val2 = val;
> +
> +	if (!(divider->div_flags & CLK_DIVIDER_READ_ONLY))
> +		val |= 1 << 3;
> +
> +	/* de-assert */
> +	val |= 1;
> +	writel(val, divider->reg);
> +	if (divider->lock)
> +		spin_unlock_irqrestore(divider->lock, flags);
> +	else
> +		__release(divider->lock);
> +
> +	pr_debug("--> %s: divider_set_rate: register val = 0x%x\n",
> +		clk_hw_get_name(hw), val2);
> +	return 0;
> +}
> +
> +static const struct clk_ops sg2042_clk_divider_ops = {
> +	.recalc_rate = sg2042_clk_divider_recalc_rate,
> +	.round_rate = sg2042_clk_divider_round_rate,
> +	.set_rate = sg2042_clk_divider_set_rate,
> +};
> +
> +static const struct clk_ops sg2042_clk_divider_ro_ops = {
> +	.recalc_rate = sg2042_clk_divider_recalc_rate,
> +	.round_rate = sg2042_clk_divider_round_rate,
> +};
> +
> +static const struct clk_ops sg2042_clk_pll_ops = {
> +	.recalc_rate = sg2042_clk_pll_recalc_rate,
> +	.round_rate = sg2042_clk_pll_round_rate,
> +	.determine_rate = sg2042_clk_pll_determine_rate,
> +	.set_rate = sg2042_clk_pll_set_rate,
> +};
> +
> +static const struct clk_ops sg2042_clk_pll_ro_ops = {
> +	.recalc_rate = sg2042_clk_pll_recalc_rate,
> +	.round_rate = sg2042_clk_pll_round_rate,
> +};
> +
> +#define SG2042_PLL(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
> +	{								\
> +		.hw.init = CLK_HW_INIT_PARENTS(				\
> +				_name,					\
> +				(const char *[]){_parent_name},		\
> +				&sg2042_clk_pll_ops,			\
> +				CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
> +		.id = _id,						\
> +		.name = _name,						\
> +		.offset_ctrl = _r_ctrl,					\
> +		.offset_status = _r_stat,				\
> +		.offset_enable = _r_enable,				\
> +		.shift_status_lock = 8 + _shift,			\
> +		.shift_status_updating = _shift,			\
> +		.shift_enable = _shift,					\
> +	}
> +
> +#define SG2042_PLL_RO(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
> +	{								\
> +		.hw.init = CLK_HW_INIT_PARENTS(				\
> +				_name,					\
> +				(const char *[]){_parent_name},		\
> +				&sg2042_clk_pll_ro_ops,			\
> +				CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
> +		.id = _id,						\
> +		.name = _name,						\
> +		.offset_ctrl = _r_ctrl,					\
> +		.offset_status = _r_stat,				\
> +		.offset_enable = _r_enable,				\
> +		.shift_status_lock = 8 + _shift,			\
> +		.shift_status_updating = _shift,			\
> +		.shift_enable = _shift,					\
> +	}
> +
> +static struct sg2042_pll_clock sg2042_pll_clks[] = {
> +	SG2042_PLL_RO(FPLL_CLK, "fpll_clock", "cgi",
> +		R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_FPLL_CONTROL, 3),
> +	SG2042_PLL_RO(DPLL0_CLK, "dpll0_clock", "cgi",
> +		R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL0_CONTROL, 4),
> +	SG2042_PLL_RO(DPLL1_CLK, "dpll1_clock", "cgi",
> +		R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL1_CONTROL, 5),
> +	SG2042_PLL(MPLL_CLK, "mpll_clock", "cgi",
> +		R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_MPLL_CONTROL, 0),
> +};
> +
> +#define SG2042_DIV(_id, _name, _parent_name,				\
> +		  _r_ctrl, _shift, _width,				\
> +		  _div_flag, _init_val) {				\
> +		.hw.init = CLK_HW_INIT_PARENTS(				\
> +				_name,					\
> +				(const char *[]){_parent_name},		\
> +				&sg2042_clk_divider_ops,		\
> +				0),					\
> +		.id = _id,						\
> +		.name = _name,						\
> +		.offset_ctrl = _r_ctrl,					\
> +		.shift = _shift,					\
> +		.width = _width,					\
> +		.div_flags = _div_flag,					\
> +		.initial_val = _init_val,				\
> +		.table = NULL,						\
> +	}
> +
> +#define SG2042_DIV_RO(_id, _name, _parent_name,				\
> +		  _r_ctrl, _shift, _width,				\
> +		  _div_flag, _init_val) {				\
> +		.hw.init = CLK_HW_INIT_PARENTS(				\
> +				_name,					\
> +				(const char *[]){_parent_name},		\
> +				&sg2042_clk_divider_ro_ops,		\
> +				0),					\
> +		.id = _id,						\
> +		.name = _name,						\
> +		.offset_ctrl = _r_ctrl,					\
> +		.shift = _shift,					\
> +		.width = _width,					\
> +		.div_flags = _div_flag,					\
> +		.initial_val = _init_val,				\
> +		.table = NULL,						\
> +	}
> +
> +/*
> + * DIV items in the array are sorted according to the clock-tree diagram,
> + * from top to bottom, from upstream to downstream. Read TRM for details.
> + */
> +#define DEF_DIVFLAG (CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO)
> +static struct sg2042_divider_clock sg2042_div_clks[] = {
> +	SG2042_DIV_RO(DIV_CLK_DPLL0_DDR01_0,
> +		"clk_div_ddr01_0", "clk_gate_ddr01_div0",
> +		R_CLKDIVREG27, 16, 5,
> +		DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
> +	SG2042_DIV_RO(DIV_CLK_FPLL_DDR01_1,
> +		"clk_div_ddr01_1", "clk_gate_ddr01_div1",
> +		R_CLKDIVREG28, 16, 5,
> +		DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
> +
> +	SG2042_DIV_RO(DIV_CLK_DPLL1_DDR23_0,
> +		"clk_div_ddr23_0", "clk_gate_ddr23_div0",
> +		R_CLKDIVREG29, 16, 5,
> +		DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
> +	SG2042_DIV_RO(DIV_CLK_FPLL_DDR23_1,
> +		"clk_div_ddr23_1", "clk_gate_ddr23_div1",
> +		R_CLKDIVREG30, 16, 5,
> +		DEF_DIVFLAG | CLK_DIVIDER_READ_ONLY, -1),
> +
> +	SG2042_DIV(DIV_CLK_MPLL_RP_CPU_NORMAL_0,
> +		"clk_div_rp_cpu_normal_0", "clk_gate_rp_cpu_normal_div0",
> +		R_CLKDIVREG0, 16, 5, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_RP_CPU_NORMAL_1,
> +		"clk_div_rp_cpu_normal_1", "clk_gate_rp_cpu_normal_div1",
> +		R_CLKDIVREG1, 16, 5, DEF_DIVFLAG, 0),
> +
> +	SG2042_DIV(DIV_CLK_MPLL_AXI_DDR_0,
> +		"clk_div_axi_ddr_0", "clk_gate_axi_ddr_div0",
> +		R_CLKDIVREG25, 16, 5, DEF_DIVFLAG, 5),
> +	SG2042_DIV(DIV_CLK_FPLL_AXI_DDR_1,
> +		"clk_div_axi_ddr_1", "clk_gate_axi_ddr_div1",
> +		R_CLKDIVREG26, 16, 5, DEF_DIVFLAG, 5),
> +
> +	SG2042_DIV(DIV_CLK_FPLL_TOP_RP_CMN_DIV2,
> +		"clk_div_top_rp_cmn_div2", "clk_mux_rp_cpu_normal",
> +		R_CLKDIVREG3, 16, 16, DEF_DIVFLAG, 0),
> +
> +	SG2042_DIV(DIV_CLK_FPLL_50M_A53, "clk_div_50m_a53", "fpll_clock",
> +		R_CLKDIVREG2, 16, 8, DEF_DIVFLAG, 0),
> +	/* downstream of div_50m_a53 */
> +	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER1, "clk_div_timer1", "clk_div_50m_a53",
> +		R_CLKDIVREG6, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER2, "clk_div_timer2", "clk_div_50m_a53",
> +		R_CLKDIVREG7, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER3, "clk_div_timer3", "clk_div_50m_a53",
> +		R_CLKDIVREG8, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER4, "clk_div_timer4", "clk_div_50m_a53",
> +		R_CLKDIVREG9, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER5, "clk_div_timer5", "clk_div_50m_a53",
> +		R_CLKDIVREG10, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER6, "clk_div_timer6", "clk_div_50m_a53",
> +		R_CLKDIVREG11, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER7, "clk_div_timer7", "clk_div_50m_a53",
> +		R_CLKDIVREG12, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER8, "clk_div_timer8", "clk_div_50m_a53",
> +		R_CLKDIVREG13, 16, 16, DEF_DIVFLAG, 0),
> +
> +	SG2042_DIV_RO(DIV_CLK_FPLL_UART_500M, "clk_div_uart_500m", "fpll_clock",
> +		R_CLKDIVREG4, 16, 7,
> +		CLK_DIVIDER_READ_ONLY, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_AHB_LPC, "clk_div_ahb_lpc", "fpll_clock",
> +		R_CLKDIVREG5, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_EFUSE, "clk_div_efuse", "fpll_clock",
> +		R_CLKDIVREG14, 16, 7, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_TX_ETH0, "clk_div_tx_eth0", "fpll_clock",
> +		R_CLKDIVREG16, 16, 11, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_PTP_REF_I_ETH0,
> +		"clk_div_ptp_ref_i_eth0", "fpll_clock",
> +		R_CLKDIVREG17, 16, 8, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_REF_ETH0, "clk_div_ref_eth0", "fpll_clock",
> +		R_CLKDIVREG18, 16, 8, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_EMMC, "clk_div_emmc", "fpll_clock",
> +		R_CLKDIVREG19, 16, 5, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_SD, "clk_div_sd", "fpll_clock",
> +		R_CLKDIVREG21, 16, 5, DEF_DIVFLAG, 0),
> +
> +	SG2042_DIV(DIV_CLK_FPLL_TOP_AXI0, "clk_div_top_axi0", "fpll_clock",
> +		R_CLKDIVREG23, 16, 5, DEF_DIVFLAG, 0),
> +	/* downstream of div_top_axi0 */
> +	SG2042_DIV(DIV_CLK_FPLL_100K_EMMC, "clk_div_100k_emmc", "clk_div_top_axi0",
> +		R_CLKDIVREG20, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_100K_SD, "clk_div_100k_sd", "clk_div_top_axi0",
> +		R_CLKDIVREG22, 16, 16, DEF_DIVFLAG, 0),
> +	SG2042_DIV(DIV_CLK_FPLL_GPIO_DB, "clk_div_gpio_db", "clk_div_top_axi0",
> +		R_CLKDIVREG15, 16, 16, DEF_DIVFLAG, 0),
> +
> +	SG2042_DIV(DIV_CLK_FPLL_TOP_AXI_HSPERI,
> +		"clk_div_top_axi_hsperi", "fpll_clock",
> +		R_CLKDIVREG24, 16, 5, DEF_DIVFLAG, 0),
> +};
> +
> +#define SG2042_GATE(_id, _name, _parent_name, _flags, \
> +		    _r_enable, _bit_idx, _flag_r) { \
> +		.id = _id,			\
> +		.name = _name,			\
> +		.parent_name = _parent_name,	\
> +		.flags = _flags,		\
> +		.offset_enable = _r_enable,	\
> +		.bit_idx = _bit_idx,		\
> +		.flag_sysctrl = _flag_r,	\
> +	}
> +
> +/*
> + * GATE items in the array are sorted according to the clock-tree diagram,
> + * from top to bottom, from upstream to downstream. Read TRM for details.
> + */
> +static const struct sg2042_gate_clock sg2042_gate_clks[] = {
> +	SG2042_GATE(GATE_CLK_DDR01_DIV0, "clk_gate_ddr01_div0", "dpll0_clock",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		R_CLKDIVREG27, 4, 0),
> +	SG2042_GATE(GATE_CLK_DDR01_DIV1, "clk_gate_ddr01_div1", "fpll_clock",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKDIVREG28, 4, 0),
> +
> +	SG2042_GATE(GATE_CLK_DDR23_DIV0, "clk_gate_ddr23_div0", "dpll1_clock",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		R_CLKDIVREG29, 4, 0),
> +	SG2042_GATE(GATE_CLK_DDR23_DIV1, "clk_gate_ddr23_div1", "fpll_clock",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKDIVREG30, 4, 0),
> +
> +	SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV0, "clk_gate_rp_cpu_normal_div0", "mpll_clock",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKDIVREG0, 4, 0),
> +	SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV1,
> +		"clk_gate_rp_cpu_normal_div1", "fpll_clock",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKDIVREG1, 4, 0),
> +
> +	SG2042_GATE(GATE_CLK_AXI_DDR_DIV0, "clk_gate_axi_ddr_div0", "mpll_clock",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKDIVREG25, 4, 0),
> +	SG2042_GATE(GATE_CLK_AXI_DDR_DIV1, "clk_gate_axi_ddr_div1", "fpll_clock",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKDIVREG26, 4, 0),
> +
> +	/* upon are gate clocks as input source for the muxes */
> +
> +	SG2042_GATE(GATE_CLK_DDR01, "clk_gate_ddr01", "clk_mux_ddr01",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKENREG1, 14, 0),
> +
> +	SG2042_GATE(GATE_CLK_DDR23, "clk_gate_ddr23", "clk_mux_ddr23",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKENREG1, 15, 0),
> +
> +	SG2042_GATE(GATE_CLK_RP_CPU_NORMAL,
> +		"clk_gate_rp_cpu_normal", "clk_mux_rp_cpu_normal",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKENREG0, 0, 0),
> +
> +	SG2042_GATE(GATE_CLK_AXI_DDR, "clk_gate_axi_ddr", "clk_mux_axi_ddr",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKENREG1, 13, 0),
> +
> +	/* upon are gate clocks directly downstream of muxes */
> +
> +	/* downstream of clk_div_top_rp_cmn_div2 */
> +	SG2042_GATE(GATE_CLK_TOP_RP_CMN_DIV2,
> +		"clk_gate_top_rp_cmn_div2", "clk_div_top_rp_cmn_div2",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 2, 0),
> +	SG2042_GATE(GATE_CLK_HSDMA, "clk_gate_hsdma", "clk_gate_top_rp_cmn_div2",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 10, 0),
> +
> +	/*
> +	 * downstream of clk_gate_rp_cpu_normal
> +	 *
> +	 * FIXME: there should be one 1/2 DIV between clk_gate_rp_cpu_normal
> +	 * and clk_gate_axi_pcie0/clk_gate_axi_pcie1.
> +	 * But the 1/2 DIV is fixed and no configurable register exported, so
> +	 * when reading from these two clocks, the rate value are still the
> +	 * same as that of clk_gate_rp_cpu_normal, it's not correct.
> +	 * This just affects the value read.
> +	 */
> +	SG2042_GATE(GATE_CLK_AXI_PCIE0,
> +		"clk_gate_axi_pcie0", "clk_gate_rp_cpu_normal",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 8, 0),
> +	SG2042_GATE(GATE_CLK_AXI_PCIE1,
> +		"clk_gate_axi_pcie1", "clk_gate_rp_cpu_normal",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 9, 0),
> +
> +	/* downstream of div_50m_a53 */
> +	SG2042_GATE(GATE_CLK_A53_50M, "clk_gate_a53_50m", "clk_div_50m_a53",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 1, 0),
> +	SG2042_GATE(GATE_CLK_TIMER1, "clk_gate_timer1", "clk_div_timer1",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 12, 0),
> +	SG2042_GATE(GATE_CLK_TIMER2, "clk_gate_timer2", "clk_div_timer2",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 13, 0),
> +	SG2042_GATE(GATE_CLK_TIMER3, "clk_gate_timer3", "clk_div_timer3",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 14, 0),
> +	SG2042_GATE(GATE_CLK_TIMER4, "clk_gate_timer4", "clk_div_timer4",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 15, 0),
> +	SG2042_GATE(GATE_CLK_TIMER5, "clk_gate_timer5", "clk_div_timer5",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 16, 0),
> +	SG2042_GATE(GATE_CLK_TIMER6, "clk_gate_timer6", "clk_div_timer6",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 17, 0),
> +	SG2042_GATE(GATE_CLK_TIMER7, "clk_gate_timer7", "clk_div_timer7",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 18, 0),
> +	SG2042_GATE(GATE_CLK_TIMER8, "clk_gate_timer8", "clk_div_timer8",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 19, 0),
> +
> +	/* gate clocks downstream from div clocks one-to-one */
> +	SG2042_GATE(GATE_CLK_UART_500M, "clk_gate_uart_500m", "clk_div_uart_500m",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 4, 0),
> +	SG2042_GATE(GATE_CLK_AHB_LPC, "clk_gate_ahb_lpc", "clk_div_ahb_lpc",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 7, 0),
> +	SG2042_GATE(GATE_CLK_EFUSE, "clk_gate_efuse", "clk_div_efuse",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 20, 0),
> +	SG2042_GATE(GATE_CLK_TX_ETH0, "clk_gate_tx_eth0", "clk_div_tx_eth0",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 30, 0),
> +	SG2042_GATE(GATE_CLK_PTP_REF_I_ETH0,
> +		"clk_gate_ptp_ref_i_eth0", "clk_div_ptp_ref_i_eth0",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 0, 0),
> +	SG2042_GATE(GATE_CLK_REF_ETH0, "clk_gate_ref_eth0", "clk_div_ref_eth0",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 1, 0),
> +	SG2042_GATE(GATE_CLK_EMMC_100M, "clk_gate_emmc", "clk_div_emmc",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 3, 0),
> +	SG2042_GATE(GATE_CLK_SD_100M, "clk_gate_sd", "clk_div_sd",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 6, 0),
> +
> +	/* downstream of clk_div_top_axi0 */
> +	SG2042_GATE(GATE_CLK_AHB_ROM, "clk_gate_ahb_rom", "clk_div_top_axi0",
> +		 0, R_CLKENREG0, 8, 0),
> +	SG2042_GATE(GATE_CLK_AHB_SF, "clk_gate_ahb_sf", "clk_div_top_axi0",
> +		0, R_CLKENREG0, 9, 0),
> +	SG2042_GATE(GATE_CLK_AXI_SRAM, "clk_gate_axi_sram", "clk_div_top_axi0",
> +		CLK_IGNORE_UNUSED, R_CLKENREG0, 10, 0),
> +	SG2042_GATE(GATE_CLK_APB_TIMER, "clk_gate_apb_timer", "clk_div_top_axi0",
> +		CLK_IGNORE_UNUSED, R_CLKENREG0, 11, 0),
> +	SG2042_GATE(GATE_CLK_APB_EFUSE, "clk_gate_apb_efuse", "clk_div_top_axi0",
> +		0, R_CLKENREG0, 21, 0),
> +	SG2042_GATE(GATE_CLK_APB_GPIO, "clk_gate_apb_gpio", "clk_div_top_axi0",
> +		0, R_CLKENREG0, 22, 0),
> +	SG2042_GATE(GATE_CLK_APB_GPIO_INTR,
> +		"clk_gate_apb_gpio_intr", "clk_div_top_axi0",
> +		0, R_CLKENREG0, 23, 0),
> +	SG2042_GATE(GATE_CLK_APB_I2C, "clk_gate_apb_i2c", "clk_div_top_axi0",
> +		0, R_CLKENREG0, 26, 0),
> +	SG2042_GATE(GATE_CLK_APB_WDT, "clk_gate_apb_wdt", "clk_div_top_axi0",
> +		0, R_CLKENREG0, 27, 0),
> +	SG2042_GATE(GATE_CLK_APB_PWM, "clk_gate_apb_pwm", "clk_div_top_axi0",
> +		0, R_CLKENREG0, 28, 0),
> +	SG2042_GATE(GATE_CLK_APB_RTC, "clk_gate_apb_rtc", "clk_div_top_axi0",
> +		0, R_CLKENREG0, 29, 0),
> +	SG2042_GATE(GATE_CLK_TOP_AXI0, "clk_gate_top_axi0", "clk_div_top_axi0",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_CLKENREG1, 11, 0),
> +	/* downstream of DIV clocks which are sourced from clk_div_top_axi0 */
> +	SG2042_GATE(GATE_CLK_GPIO_DB, "clk_gate_gpio_db", "clk_div_gpio_db",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 24, 0),
> +	SG2042_GATE(GATE_CLK_100K_EMMC, "clk_gate_100k_emmc", "clk_div_100k_emmc",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 4, 0),
> +	SG2042_GATE(GATE_CLK_100K_SD, "clk_gate_100k_sd", "clk_div_100k_sd",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 7, 0),
> +
> +	/* downstream of clk_div_top_axi_hsperi */
> +	SG2042_GATE(GATE_CLK_SYSDMA_AXI,
> +		"clk_gate_sysdma_axi", "clk_div_top_axi_hsperi",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 3, 0),
> +	SG2042_GATE(GATE_CLK_APB_UART,
> +		"clk_gate_apb_uart", "clk_div_top_axi_hsperi",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 5, 0),
> +	SG2042_GATE(GATE_CLK_AXI_DBG_I2C,
> +		"clk_gate_axi_dbg_i2c", "clk_div_top_axi_hsperi",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 6, 0),
> +	SG2042_GATE(GATE_CLK_APB_SPI,
> +		"clk_gate_apb_spi", "clk_div_top_axi_hsperi",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 25, 0),
> +	SG2042_GATE(GATE_CLK_AXI_ETH0,
> +		"clk_gate_axi_eth0", "clk_div_top_axi_hsperi",
> +		CLK_SET_RATE_PARENT, R_CLKENREG0, 31, 0),
> +	SG2042_GATE(GATE_CLK_AXI_EMMC,
> +		"clk_gate_axi_emmc", "clk_div_top_axi_hsperi",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 2, 0),
> +	SG2042_GATE(GATE_CLK_AXI_SD,
> +		"clk_gate_axi_sd", "clk_div_top_axi_hsperi",
> +		CLK_SET_RATE_PARENT, R_CLKENREG1, 5, 0),
> +	SG2042_GATE(GATE_CLK_TOP_AXI_HSPERI,
> +		"clk_gate_top_axi_hsperi", "clk_div_top_axi_hsperi",
> +		CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> +		R_CLKENREG1, 12, 0),
> +
> +	/* downstream of clk_gate_rp_cpu_normal about rxu */
> +	SG2042_GATE(GATE_CLK_RXU0, "clk_gate_rxu0", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 0, 1),
> +	SG2042_GATE(GATE_CLK_RXU1, "clk_gate_rxu1", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 1, 1),
> +	SG2042_GATE(GATE_CLK_RXU2, "clk_gate_rxu2", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 2, 1),
> +	SG2042_GATE(GATE_CLK_RXU3, "clk_gate_rxu3", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 3, 1),
> +	SG2042_GATE(GATE_CLK_RXU4, "clk_gate_rxu4", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 4, 1),
> +	SG2042_GATE(GATE_CLK_RXU5, "clk_gate_rxu5", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 5, 1),
> +	SG2042_GATE(GATE_CLK_RXU6, "clk_gate_rxu6", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 6, 1),
> +	SG2042_GATE(GATE_CLK_RXU7, "clk_gate_rxu7", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 7, 1),
> +	SG2042_GATE(GATE_CLK_RXU8, "clk_gate_rxu8", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 8, 1),
> +	SG2042_GATE(GATE_CLK_RXU9, "clk_gate_rxu9", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 9, 1),
> +	SG2042_GATE(GATE_CLK_RXU10, "clk_gate_rxu10", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 10, 1),
> +	SG2042_GATE(GATE_CLK_RXU11, "clk_gate_rxu11", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 11, 1),
> +	SG2042_GATE(GATE_CLK_RXU12, "clk_gate_rxu12", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 12, 1),
> +	SG2042_GATE(GATE_CLK_RXU13, "clk_gate_rxu13", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 13, 1),
> +	SG2042_GATE(GATE_CLK_RXU14, "clk_gate_rxu14", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 14, 1),
> +	SG2042_GATE(GATE_CLK_RXU15, "clk_gate_rxu15", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 15, 1),
> +	SG2042_GATE(GATE_CLK_RXU16, "clk_gate_rxu16", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 16, 1),
> +	SG2042_GATE(GATE_CLK_RXU17, "clk_gate_rxu17", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 17, 1),
> +	SG2042_GATE(GATE_CLK_RXU18, "clk_gate_rxu18", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 18, 1),
> +	SG2042_GATE(GATE_CLK_RXU19, "clk_gate_rxu19", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 19, 1),
> +	SG2042_GATE(GATE_CLK_RXU20, "clk_gate_rxu20", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 20, 1),
> +	SG2042_GATE(GATE_CLK_RXU21, "clk_gate_rxu21", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 21, 1),
> +	SG2042_GATE(GATE_CLK_RXU22, "clk_gate_rxu22", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 22, 1),
> +	SG2042_GATE(GATE_CLK_RXU23, "clk_gate_rxu23", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 23, 1),
> +	SG2042_GATE(GATE_CLK_RXU24, "clk_gate_rxu24", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 24, 1),
> +	SG2042_GATE(GATE_CLK_RXU25, "clk_gate_rxu25", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 25, 1),
> +	SG2042_GATE(GATE_CLK_RXU26, "clk_gate_rxu26", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 26, 1),
> +	SG2042_GATE(GATE_CLK_RXU27, "clk_gate_rxu27", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 27, 1),
> +	SG2042_GATE(GATE_CLK_RXU28, "clk_gate_rxu28", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 28, 1),
> +	SG2042_GATE(GATE_CLK_RXU29, "clk_gate_rxu29", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 29, 1),
> +	SG2042_GATE(GATE_CLK_RXU30, "clk_gate_rxu30", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 30, 1),
> +	SG2042_GATE(GATE_CLK_RXU31, "clk_gate_rxu31", "clk_gate_rp_cpu_normal",
> +		0, R_RP_RXU_CLK_ENABLE, 31, 1),
> +
> +	/* downstream of clk_gate_rp_cpu_normal about mp */
> +	SG2042_GATE(GATE_CLK_MP0, "clk_gate_mp0", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP0_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP1, "clk_gate_mp1", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP1_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP2, "clk_gate_mp2", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP2_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP3, "clk_gate_mp3", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP3_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP4, "clk_gate_mp4", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP4_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP5, "clk_gate_mp5", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP5_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP6, "clk_gate_mp6", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP6_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP7, "clk_gate_mp7", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP7_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP8, "clk_gate_mp8", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP8_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP9, "clk_gate_mp9", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP9_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP10, "clk_gate_mp10", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP10_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP11, "clk_gate_mp11", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP11_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP12, "clk_gate_mp12", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP12_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP13, "clk_gate_mp13", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP13_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP14, "clk_gate_mp14", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP14_CONTROL_REG, 0, 1),
> +	SG2042_GATE(GATE_CLK_MP15, "clk_gate_mp15", "clk_gate_rp_cpu_normal",
> +		CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP15_CONTROL_REG, 0, 1),
> +};
> +
> +#define SG2042_MUX(_id, _name, _parent_names, _flags, _r_select, _shift, _width) { \
> +		.id = _id,					\
> +		.name = _name,					\
> +		.parent_names = _parent_names,			\
> +		.num_parents = ARRAY_SIZE(_parent_names),	\
> +		.flags = _flags,				\
> +		.offset_select = _r_select,			\
> +		.shift = _shift,				\
> +		.width = _width,				\
> +	}
> +
> +/*
> + * Note: regarding names for mux clock, "0/1" or "div0/div1" means the
> + * first/second parent input source, not the register value.
> + * For example:
> + * "clk_div_ddr01_0" is the name of Clock divider 0 control of DDR01, and
> + * "clk_gate_ddr01_div0" is the gate clock in front of the "clk_div_ddr01_0",
> + * they are both controlled by register CLKDIVREG27;
> + * "clk_div_ddr01_1" is the name of Clock divider 1 control of DDR01, and
> + * "clk_gate_ddr01_div1" is the gate clock in front of the "clk_div_ddr01_1",
> + * they are both controlled by register CLKDIVREG28;
> + * While for register value of mux selection, use Clock Select for DDR01’s clock
> + * as example, see CLKSELREG0, bit[2].
> + * 1: Select in_dpll0_clk as clock source, correspondng to the parent input
> + *    source from "clk_div_ddr01_0".
> + * 0: Select in_fpll_clk as clock source, corresponding to the parent input
> + *    source from "clk_div_ddr01_1".
> + * So we need a table to define the array of register values corresponding to
> + * the parent index and tell CCF about this when registering mux clock.
> + */
> +static const u32 sg2042_mux_table[] = {1, 0};
> +
> +static const char *const clk_mux_ddr01_p[] = {
> +			"clk_div_ddr01_0", "clk_div_ddr01_1"};
> +static const char *const clk_mux_ddr23_p[] = {
> +			"clk_div_ddr23_0", "clk_div_ddr23_1"};
> +static const char *const clk_mux_rp_cpu_normal_p[] = {
> +			"clk_div_rp_cpu_normal_0", "clk_div_rp_cpu_normal_1"};
> +static const char *const clk_mux_axi_ddr_p[] = {
> +			"clk_div_axi_ddr_0", "clk_div_axi_ddr_1"};
> +
> +static struct sg2042_mux_clock sg2042_mux_clks[] = {
> +	SG2042_MUX(MUX_CLK_DDR01, "clk_mux_ddr01", clk_mux_ddr01_p,
> +		CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
> +		R_CLKSELREG0, 2, 1),
> +	SG2042_MUX(MUX_CLK_DDR23, "clk_mux_ddr23", clk_mux_ddr23_p,
> +		CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
> +		R_CLKSELREG0, 3, 1),
> +	SG2042_MUX(MUX_CLK_RP_CPU_NORMAL, "clk_mux_rp_cpu_normal", clk_mux_rp_cpu_normal_p,
> +		CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +		R_CLKSELREG0, 0, 1),
> +	SG2042_MUX(MUX_CLK_AXI_DDR, "clk_mux_axi_ddr", clk_mux_axi_ddr_p,
> +		CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +		R_CLKSELREG0, 1, 1),
> +};
> +
> +static DEFINE_SPINLOCK(sg2042_clk_lock);
> +
> +static int sg2042_clk_register_plls(struct sg2042_clk_data *clk_data,
> +				   struct sg2042_pll_clock pll_clks[],
> +				   int num_pll_clks)
> +{
> +	struct clk_hw *hw;
> +	struct sg2042_pll_clock *pll;
> +	int i, ret = 0;
> +
> +	for (i = 0; i < num_pll_clks; i++) {
> +		pll = &(pll_clks[i]);
> +		/* assign these for ops usage during registration */
> +		pll->map = clk_data->regmap_syscon;
> +		pll->lock = &sg2042_clk_lock;
> +
> +		hw = &pll->hw;
> +		ret = clk_hw_register(NULL, hw);
> +		if (ret) {
> +			pr_err("failed to register clock %s\n", pll->name);
> +			break;
> +		}
> +
> +		clk_data->onecell_data.hws[pll->id] = hw;
> +	}
> +
> +	/* leave unregister to outside if failed */
> +	return ret;
> +}
> +
> +static int sg2042_clk_register_divs(struct sg2042_clk_data *clk_data,
> +				   struct sg2042_divider_clock div_clks[],
> +				   int num_div_clks)
> +{
> +	struct clk_hw *hw;
> +	struct sg2042_divider_clock *div;
> +	int i, val, ret = 0;
> +
> +	for (i = 0; i < num_div_clks; i++) {
> +		div = &(div_clks[i]);
> +
> +		if (div->div_flags & CLK_DIVIDER_HIWORD_MASK) {
> +			if (div->width + div->shift > 16) {
> +				pr_warn("divider value exceeds LOWORD field\n");
> +				ret = -EINVAL;
> +				break;
> +			}
> +		}
> +
> +		div->reg = clk_data->iobase + div->offset_ctrl;
> +		div->lock = &sg2042_clk_lock;
> +
> +		hw = &div->hw;
> +		ret = clk_hw_register(NULL, hw);
> +		if (ret) {
> +			pr_err("failed to register clock %s\n", div->name);
> +			break;
> +		}
> +
> +		clk_data->onecell_data.hws[div->id] = hw;
> +
> +		if (div->initial_val >= 0) {
> +			val = readl(div->reg);
> +
> +			/*
> +			 * set a default divider factor,
> +			 * clk driver should not select divider clock as the
> +			 * clock source, before set the divider by right process
> +			 * (assert div, set div factor, de assert div).
> +			 */
> +			if (div->initial_val > 0)
> +				val |= (div->initial_val << 16 | 1 << 3);
> +			else {
> +				/*
> +				 * the div register is config to use divider
> +				 * factor, don't change divider
> +				 */
> +				if (!(val >> 3 & 0x1))
> +					val |= 1 << 16;
> +			}
> +
> +			writel(val, div->reg);
> +		}
> +	}
> +
> +	/* leave unregister to outside if failed */
> +	return ret;
> +}
> +
> +static int sg2042_clk_register_gates(struct sg2042_clk_data *clk_data,
> +				    const struct sg2042_gate_clock gate_clks[],
> +				    int num_gate_clks)
> +{
> +	struct clk_hw *hw;
> +	const struct sg2042_gate_clock *gate;
> +	int i, ret = 0;
> +	void __iomem *reg;
> +
> +	for (i = 0; i < num_gate_clks; i++) {
> +		gate = &(gate_clks[i]);
> +		if (gate->flag_sysctrl)
> +			reg = clk_data->iobase_syscon + gate->offset_enable;
> +		else
> +			reg = clk_data->iobase + gate->offset_enable;
> +		hw = clk_hw_register_gate(
> +			NULL,
> +			gate->name,
> +			gate->parent_name,
> +			gate->flags,
> +			reg,
> +			gate->bit_idx,
> +			0,
> +			&sg2042_clk_lock);
> +		if (IS_ERR(hw)) {
> +			pr_err("failed to register clock %s\n", gate->name);
> +			ret = PTR_ERR(hw);
> +			break;
> +		}
> +
> +		clk_data->onecell_data.hws[gate->id] = hw;
> +	}
> +
> +	/* leave unregister to outside if failed */
> +	return ret;
> +}
> +
> +static int sg2042_mux_notifier_cb(struct notifier_block *nb,
> +				unsigned long event, void *data)
> +{
> +	int ret = 0;
> +	struct clk_notifier_data *ndata = data;
> +	struct clk_hw *hw = __clk_get_hw(ndata->clk);
> +	const struct clk_ops *ops = &clk_mux_ops;
> +	struct sg2042_mux_clock *mux = to_sg2042_mux_nb(nb);
> +
> +	/* To switch to fpll before changing rate and restore after that */
> +	if (event == PRE_RATE_CHANGE) {
> +		mux->original_index = ops->get_parent(hw);
> +
> +		/*
> +		 * "1" is the array index of the second parent input source of
> +		 * mux. For SG2042, it's fpll for all mux clocks.
> +		 * "0" is the array index of the frist parent input source of
> +		 * mux, For SG2042, it's mpll.
> +		 * FIXME, any good idea to avoid magic number?
> +		 */
> +		if (mux->original_index == 0)
> +			ret = ops->set_parent(hw, 1);
> +	} else if (event == POST_RATE_CHANGE) {
> +		ret = ops->set_parent(hw, mux->original_index);
> +	}
> +
> +	return notifier_from_errno(ret);
> +}
> +
> +static int sg2042_clk_register_muxs(struct sg2042_clk_data *clk_data,
> +				   struct sg2042_mux_clock mux_clks[],
> +				   int num_mux_clks)
> +{
> +	struct clk_hw *hw;
> +	struct sg2042_mux_clock *mux;
> +	int i, ret = 0;
> +
> +	for (i = 0; i < num_mux_clks; i++) {
> +		mux = &(mux_clks[i]);
> +
> +		hw = clk_hw_register_mux_table(
> +			NULL,
> +			mux->name,
> +			mux->parent_names,
> +			mux->num_parents,
> +			mux->flags,
> +			clk_data->iobase + mux->offset_select,
> +			mux->shift,
> +			BIT(mux->width) - 1,
> +			0,
> +			sg2042_mux_table,
> +			&sg2042_clk_lock);
> +		if (IS_ERR(hw)) {
> +			pr_err("failed to register clock %s\n", mux->name);
> +			ret = PTR_ERR(hw);
> +			break;
> +		}
> +
> +		clk_data->onecell_data.hws[mux->id] = hw;
> +
> +		/*
> +		 * FIXME: Theoretically, we should set parent for the
> +		 * mux, but seems hardware has done this for us with
> +		 * default value, so we don't set parent again here.
> +		 */
> +
> +		if (!(mux->flags & CLK_MUX_READ_ONLY)) {
> +			mux->clk_nb.notifier_call = sg2042_mux_notifier_cb;
> +			ret = clk_notifier_register(hw->clk, &(mux->clk_nb));
> +			if (ret) {
> +				pr_err("failed to register clock notifier for %s\n",
> +					mux->name);
> +				goto error_cleanup;
> +			}
> +		}
> +	}
> +
> +	return 0;
> +
> +error_cleanup:
> +	/* unregister notifier and release the memory allocated */
> +	for (i = 0; i < num_mux_clks; i++) {
> +		mux = &(mux_clks[i]);
> +
> +		hw = clk_data->onecell_data.hws[mux->id];
> +
> +		if (hw != NULL)
> +			clk_notifier_unregister(hw->clk, &(mux->clk_nb));
> +	}
> +
> +	/* leave clk unregister to outside if failed */
> +	return ret;
> +}
> +
> +static int __init sg2042_clk_init_clk_data(
> +	struct device_node *node,
> +	int num_clks,
> +	struct sg2042_clk_data **pp_clk_data)
> +{
> +	int ret = 0;
> +	struct sg2042_clk_data *clk_data = NULL;
> +	struct device_node *np_syscon;
> +
> +	np_syscon = of_parse_phandle(node, "sophgo,system-ctrl", 0);
> +	if (!np_syscon) {
> +		pr_err("failed to get system-ctrl node\n");
> +		ret = -EINVAL;
> +		goto error_out;
> +	}
> +
> +	clk_data = kzalloc(struct_size(clk_data, onecell_data.hws, num_clks), GFP_KERNEL);
> +	if (!clk_data) {
> +		ret = -ENOMEM;
> +		goto error_out;
> +	}
> +
> +	clk_data->regmap_syscon = device_node_to_regmap(np_syscon);
> +	if (IS_ERR_OR_NULL(clk_data->regmap_syscon)) {
> +		pr_err("cannot get regmap_syscon %ld\n", PTR_ERR(clk_data->regmap_syscon));
> +		ret = -ENODEV;
> +		goto cleanup;
> +	}
> +	clk_data->iobase_syscon = of_iomap(np_syscon, 0);
> +	clk_data->iobase = of_iomap(node, 0);
> +	clk_data->onecell_data.num = num_clks;
> +
> +	*pp_clk_data = clk_data;
> +	return ret;
> +
> +cleanup:
> +	kfree(clk_data);
> +
> +error_out:
> +	return ret;
> +}
> +
> +static void __init sg2042_clk_init(struct device_node *node)
> +{
> +	struct sg2042_clk_data *clk_data = NULL;
> +	int i, ret = 0;
> +	int num_clks = 0;
> +
> +	num_clks = ARRAY_SIZE(sg2042_pll_clks) +
> +		   ARRAY_SIZE(sg2042_div_clks) +
> +		   ARRAY_SIZE(sg2042_gate_clks) +
> +		   ARRAY_SIZE(sg2042_mux_clks);
> +	if (num_clks == 0) {
> +		ret = -EINVAL;
> +		goto error_out;
> +	}
> +
> +	ret = sg2042_clk_init_clk_data(node, num_clks, &clk_data);
> +	if (ret < 0)
> +		goto error_out;
> +
> +	ret = sg2042_clk_register_plls(clk_data, sg2042_pll_clks,
> +				ARRAY_SIZE(sg2042_pll_clks));
> +	if (ret)
> +		goto cleanup;
> +
> +	ret = sg2042_clk_register_divs(clk_data, sg2042_div_clks,
> +				ARRAY_SIZE(sg2042_div_clks));
> +	if (ret)
> +		goto cleanup;
> +
> +	ret = sg2042_clk_register_gates(clk_data, sg2042_gate_clks,
> +				ARRAY_SIZE(sg2042_gate_clks));
> +	if (ret)
> +		goto cleanup;
> +
> +	ret = sg2042_clk_register_muxs(clk_data, sg2042_mux_clks,
> +				ARRAY_SIZE(sg2042_mux_clks));
> +	if (ret)
> +		goto cleanup;
> +
> +	ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, &clk_data->onecell_data);
> +	if (ret)
> +		goto cleanup;
> +
> +	return;
> +
> +cleanup:
> +	for (i = 0; i < num_clks; i++) {
> +		if (clk_data->onecell_data.hws[i] != NULL)
> +			clk_hw_unregister(clk_data->onecell_data.hws[i]);
> +	}
> +	kfree(clk_data);
> +
> +error_out:
> +	pr_err("%s failed error number %d\n", __func__, ret);
> +}
> +
> +CLK_OF_DECLARE(sg2042_clk, "sophgo,sg2042-clkgen", sg2042_clk_init);
> diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.h b/drivers/clk/sophgo/clk-sophgo-sg2042.h
> new file mode 100644
> index 000000000000..651d93033547
> --- /dev/null
> +++ b/drivers/clk/sophgo/clk-sophgo-sg2042.h
> @@ -0,0 +1,226 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __CLK_SOPHGO_SG2042_H
> +#define __CLK_SOPHGO_SG2042_H
> +
> +#include <linux/regmap.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +
> +/* Registers defined in SYS_CTRL */
> +#define R_PLL_STAT		0xC0
> +#define R_PLL_CLKEN_CONTROL	0xC4
> +#define R_MPLL_CONTROL		0xE8
> +#define R_FPLL_CONTROL		0xF4
> +#define R_DPLL0_CONTROL		0xF8
> +#define R_DPLL1_CONTROL		0xFC
> +
> +#define R_RP_RXU_CLK_ENABLE	0x0368
> +#define R_MP0_STATUS_REG	0x0380
> +#define R_MP0_CONTROL_REG	0x0384
> +#define R_MP1_STATUS_REG	0x0388
> +#define R_MP1_CONTROL_REG	0x038C
> +#define R_MP2_STATUS_REG	0x0390
> +#define R_MP2_CONTROL_REG	0x0394
> +#define R_MP3_STATUS_REG	0x0398
> +#define R_MP3_CONTROL_REG	0x039C
> +#define R_MP4_STATUS_REG	0x03A0
> +#define R_MP4_CONTROL_REG	0x03A4
> +#define R_MP5_STATUS_REG	0x03A8
> +#define R_MP5_CONTROL_REG	0x03AC
> +#define R_MP6_STATUS_REG	0x03B0
> +#define R_MP6_CONTROL_REG	0x03B4
> +#define R_MP7_STATUS_REG	0x03B8
> +#define R_MP7_CONTROL_REG	0x03BC
> +#define R_MP8_STATUS_REG	0x03C0
> +#define R_MP8_CONTROL_REG	0x03C4
> +#define R_MP9_STATUS_REG	0x03C8
> +#define R_MP9_CONTROL_REG	0x03CC
> +#define R_MP10_STATUS_REG	0x03D0
> +#define R_MP10_CONTROL_REG	0x03D4
> +#define R_MP11_STATUS_REG	0x03D8
> +#define R_MP11_CONTROL_REG	0x03DC
> +#define R_MP12_STATUS_REG	0x03E0
> +#define R_MP12_CONTROL_REG	0x03E4
> +#define R_MP13_STATUS_REG	0x03E8
> +#define R_MP13_CONTROL_REG	0x03EC
> +#define R_MP14_STATUS_REG	0x03F0
> +#define R_MP14_CONTROL_REG	0x03F4
> +#define R_MP15_STATUS_REG	0x03F8
> +#define R_MP15_CONTROL_REG	0x03FC
> +
> +/* Registers defined in CLOCK */
> +#define R_CLKENREG0		0x00
> +#define R_CLKENREG1		0x04
> +#define R_CLKSELREG0		0x20
> +#define R_CLKDIVREG0		0x40
> +#define R_CLKDIVREG1		0x44
> +#define R_CLKDIVREG2		0x48
> +#define R_CLKDIVREG3		0x4C
> +#define R_CLKDIVREG4		0x50
> +#define R_CLKDIVREG5		0x54
> +#define R_CLKDIVREG6		0x58
> +#define R_CLKDIVREG7		0x5C
> +#define R_CLKDIVREG8		0x60
> +#define R_CLKDIVREG9		0x64
> +#define R_CLKDIVREG10		0x68
> +#define R_CLKDIVREG11		0x6C
> +#define R_CLKDIVREG12		0x70
> +#define R_CLKDIVREG13		0x74
> +#define R_CLKDIVREG14		0x78
> +#define R_CLKDIVREG15		0x7C
> +#define R_CLKDIVREG16		0x80
> +#define R_CLKDIVREG17		0x84
> +#define R_CLKDIVREG18		0x88
> +#define R_CLKDIVREG19		0x8C
> +#define R_CLKDIVREG20		0x90
> +#define R_CLKDIVREG21		0x94
> +#define R_CLKDIVREG22		0x98
> +#define R_CLKDIVREG23		0x9C
> +#define R_CLKDIVREG24		0xA0
> +#define R_CLKDIVREG25		0xA4
> +#define R_CLKDIVREG26		0xA8
> +#define R_CLKDIVREG27		0xAC
> +#define R_CLKDIVREG28		0xB0
> +#define R_CLKDIVREG29		0xB4
> +#define R_CLKDIVREG30		0xB8
> +
> +/*
> + * clock common data
> + * @iobase: address of clock-controller
> + * @iobase_syscon & @regmap_syscon: point to the same address of system-controller,
> + *  the reason we use two different type of pointer just due to PLL uses
> + *  regmap while others use iomem.
> + * @lock: clock register access lock
> + * @onecell_data: used for adding providers.
> + */
> +struct sg2042_clk_data {
> +	void __iomem *iobase;
> +	void __iomem *iobase_syscon;
> +	struct regmap *regmap_syscon;
> +	struct clk_hw_onecell_data onecell_data;
> +};
> +
> +/*
> + * PLL clock
> + * @id:				used to map clk_onecell_data
> + * @name:			used for print even when clk registration failed
> + * @map:			used for regmap read/write, regmap is more useful
> + *				then iomem address when we have multiple offsets
> + *				for different registers.
> + *				NOTE: PLL registers are all in SYS_CTRL!
> + * @lock:			spinlock to protect register access
> + * @offset_status:		offset of pll status registers
> + * @offset_enable:		offset of pll enable registers
> + * @offset_ctrl:		offset of pll control registers
> + * @shift_status_lock:		shift of XXX_LOCK in pll status register
> + * @shift_status_updating:	shift of UPDATING_XXX in pll status register
> + * @shift_enable:		shift of XXX_CLK_EN in pll enable register
> + */
> +struct sg2042_pll_clock {
> +	struct clk_hw	hw;
> +
> +	/* private data */
> +	unsigned int id;
> +	const char *name;
> +
> +	struct regmap *map;
> +	spinlock_t *lock;
> +
> +	u32 offset_status;
> +	u32 offset_enable;
> +	u32 offset_ctrl;
> +	u8 shift_status_lock;
> +	u8 shift_status_updating;
> +	u8 shift_enable;
> +};
> +
> +#define to_sg2042_pll_clk(_hw) container_of(_hw, struct sg2042_pll_clock, hw)
> +
> +/*
> + * Divider clock
> + * @id:			used to map clk_onecell_data
> + * @name:		used for print even when clk registration failed
> + * @reg:		used for readl/writel.
> + *			NOTE: DIV registers are ALL in CLOCK!
> + * @lock:		spinlock to protect register access
> + * @offset_ctrl:	offset of divider control registers
> + * @shift:		shift of "Clock Divider Factor" in divider control register
> + * @width:		width of "Clock Divider Factor" in divider control register
> + * @div_flags:		private flags for this clock, not for framework-specific
> + * @initial_val:	initial value of the divider, a value < 0 means ignoring
> + *			setting of initial value.
> + * @table:		the div table that the divider supports
> + */
> +struct sg2042_divider_clock {
> +	struct clk_hw	hw;
> +
> +	/* private data */
> +	unsigned int id;
> +	const char *name;
> +
> +	void __iomem *reg;
> +	spinlock_t *lock;
> +
> +	unsigned long offset_ctrl;
> +	u8 shift;
> +	u8 width;
> +	u8 div_flags;
> +	s32 initial_val;
> +	struct clk_div_table *table;
> +};
> +
> +#define to_sg2042_clk_divider(_hw)	\
> +	container_of(_hw, struct sg2042_divider_clock, hw)
> +
> +/*
> + * Gate clock
> + * @id:			used to map clk_onecell_data
> + * @name:		string of this clock name
> + * @parent_name:	string of parent clock name
> + * @flags:		framework-specific flags for this clock
> + * @offset_enable:	offset of gate enable registers
> + * @bit_idx:		which bit in the register controls gating of this clock
> + * @flag_sysctrl:	flag if this clock is controlled by registers defined
> + *			in SYS_CTRL, 1: yes, 0: no, it's in CLOCK.
> + *			NOTE: Gate registers are scattered in SYS_CTRL and CLOCK!
> + */
> +struct sg2042_gate_clock {
> +	unsigned int id;
> +	const char *name;
> +	const char *parent_name;
> +	unsigned long flags;
> +	unsigned long offset_enable;
> +	u8 bit_idx;
> +	u8 flag_sysctrl;
> +};
> +
> +/*
> + * Mux clock
> + * @id:			used to map clk_onecell_data
> + * @name:		string of this clock name
> + * @parent_name:	string array of parents' clock name
> + * @flags:		framework-specific flags for this clock
> + * @offset_select:	offset of mux selection registers
> + *			NOTE: MUX registers are ALL in CLOCK!
> + * @shift:		shift of "Clock Select" in mux selection register
> + * @width:		width of "Clock Select" in mux selection register
> + * @clk_nb:		used for notification
> + * @original_index:	set by notifier callback
> + */
> +struct sg2042_mux_clock {
> +	unsigned int id;
> +	const char *name;
> +	const char * const *parent_names;
> +	u8 num_parents;
> +	unsigned long flags;
> +	unsigned long offset_select;
> +	u8 shift;
> +	u8 width;
> +	struct notifier_block clk_nb;
> +	u8 original_index;
> +};
> +
> +#define to_sg2042_mux_nb(_nb) container_of(_nb, struct sg2042_mux_clock, clk_nb)
> +
> +#endif /* __CLK_SOPHGO_SG2042_H */
> -- 
> 2.25.1
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver

[Chen Wang]

hi,

Thank you Conor for your carefully review, I need some time to digest 
your comments. While I have some quick questions embeded.

On 2023/12/9 0:47, Conor Dooley wrote:
> On Fri, Dec 08, 2023 at 09:14:32AM +0800, Chen Wang wrote:
>
>> +#define div_mask(width) ((1 << (width)) - 1)
> Looks like this should be genmask.
Yes, I will improve this.
>
>> +#define ENCODE_PLL_CTRL(fbdiv, p1, p2, refdiv) \
>> +	(((fbdiv & 0xfff) << 16) | ((p2 & 0x7) << 12) | ((p1 & 0x7) << 8) | (refdiv & 0x3f))
> IMO this should be a function not a macro.
Would like to listen why it should be a function instead of a macro? Any 
experiences you can share with me?
>
>> +
>> +static inline int __sg2042_pll_enable(struct sg2042_pll_clock *pll, bool en)
> Why the __ prefixing of function names btw?

:) I just want to differ/highlight these functions agaist those clk 
operators. Anyway, this is indeed confusing, I will remove this ugly "__".

>> +{
>> +	unsigned int value = 0;
>> +	unsigned long enter;
>> +	struct regmap *map = pll->map;
>> +
>> +	if (en) {
>> +		/* wait pll lock */
>> +		enter = jiffies;
>> +		regmap_read(map, pll->offset_status, &value);
>> +		while (!((value >> pll->shift_status_lock) & 0x1)) {
>> +			regmap_read(map, pll->shift_status_lock, &value);
>> +			if (time_after(jiffies, enter + HZ / 10))
>> +				pr_warn("%s not locked\n", pll->name);
>> +		}
> Can't you just use read_poll_timeout()?
> https://elixir.bootlin.com/linux/latest/source/include/linux/iopoll.h#L16
It looks like this, will check more.
>> +		/* wait pll updating */
>> +		enter = jiffies;
>> +		regmap_read(map, pll->shift_status_updating, &value);
>> +		while (((value >> pll->shift_status_updating) & 0x1)) {
>> +			regmap_read(map, pll->shift_status_updating, &value);
>> +			if (time_after(jiffies, enter + HZ / 10))
>> +				pr_warn("%s still updating\n", pll->name);
>> +		}
>> +		/* enable pll */
>> +		regmap_read(map, pll->offset_enable, &value);
>> +		regmap_write(map, pll->offset_enable, value | (1 << pll->shift_enable));
>> +	} else {
>> +		/* disable pll */
>> +		regmap_read(map, pll->offset_enable, &value);
>> +		regmap_write(map, pll->offset_enable, value & (~(1 << pll->shift_enable)));
>> +	}
>> +
>> +	return 0;
>> +}
>> + +static unsigned int __sg2042_get_table_div(
>> +	const struct clk_div_table *table,
>> +	unsigned int val)
>> +{
>> +	const struct clk_div_table *clkt;
>> +
>> +	for (clkt = table; clkt->div; clkt++)
>> +		if (clkt->val == val)
>> +			return clkt->div;
>> +	return 0;
>> +}
>> +
>> +static unsigned int __sg2042_get_div(
>> +	const struct clk_div_table *table,
>> +	unsigned int val,
>> +	unsigned long flags, u8 width)
>> +{
>> +	if (flags & CLK_DIVIDER_ONE_BASED)
>> +		return val;
>> +	if (flags & CLK_DIVIDER_POWER_OF_TWO)
>> +		return 1 << val;
>> +	if (flags & CLK_DIVIDER_MAX_AT_ZERO)
>> +		return val ? val : div_mask(width) + 1;
>> +	if (table)
>> +		return __sg2042_get_table_div(table, val);
>> +	return val + 1;
>> +}
> Are these not effectively the same as clk_divider's ops?
Will double check.
>
>> +
>> +/*
>> + * @reg_value: current register value
>> + * @parent_rate: parent frequency
>> + *
>> + * This function is used to calculate below "rate" in equation
>> + * rate = (parent_rate/REFDIV) x FBDIV/POSTDIV1/POSTDIV2
>> + *      = (parent_rate x FBDIV) / (REFDIV x POSTDIV1 x POSTDIV2)
>> + */
>> +static unsigned long __sg2042_pll_recalc_rate(
>> +	unsigned int reg_value,
>> +	unsigned long parent_rate)
>> +{
>> +	unsigned int fbdiv, refdiv;
>> +	unsigned int postdiv1, postdiv2;
>> +	u64 rate, numerator, denominator;
>> +
>> +	fbdiv = (reg_value >> 16) & 0xfff;
>> +	refdiv = reg_value & 0x3f;
>> +	postdiv1 = (reg_value >> 8) & 0x7;
>> +	postdiv2 = (reg_value >> 12) & 0x7;
> IMO all of these are opportunities for GENMASK and defines.
Looks like this, will double check.
>> +
>> +	numerator = parent_rate * fbdiv;
>> +	denominator = refdiv * postdiv1 * postdiv2;
>> +	do_div(numerator, denominator);
>> +	rate = numerator;
>> +
>> +	return rate;
>> +}
>> +
>> +/*
>> + * Below array is the total combination lists of POSTDIV1 and POSTDIV2
>> + * for example:
>> + * postdiv1_2[0] = {2, 4, 8}
>> + *           ==> div1 = 2, div2 = 4 , div1 * div2 = 8
>> + * And POSTDIV_RESULT_INDEX point to 3rd element in the array
>> + */
>> +#define	POSTDIV_RESULT_INDEX	2
>> +static int postdiv1_2[][3] = {
>> +	{2, 4,  8}, {3, 3,  9}, {2, 5, 10}, {2, 6, 12},
>> +	{2, 7, 14}, {3, 5, 15}, {4, 4, 16}, {3, 6, 18},
>> +	{4, 5, 20}, {3, 7, 21}, {4, 6, 24}, {5, 5, 25},
>> +	{4, 7, 28}, {5, 6, 30}, {5, 7, 35}, {6, 6, 36},
>> +	{6, 7, 42}, {7, 7, 49}
>> +};
>> +
>> +/*
>> + * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
>> + * to get the closest postdiiv combination.
>> + * @rate: FOUTPOSTDIV
>> + * @prate: parent rate, i.e. FREF
>> + * @fbdiv: FBDIV
>> + * @refdiv: REFDIV
>> + * @postdiv1: POSTDIV1, output
>> + * @postdiv2: POSTDIV2, output
>> + * See TRM:
>> + * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
>> + * So we get following formula to get POSTDIV1 and POSTDIV2:
>> + * POSTDIV = (prate/REFDIV) x FBDIV/rate
>> + * above POSTDIV = POSTDIV1*POSTDIV2
>> + */
>> +static int __sg2042_pll_get_postdiv_1_2(
>> +	unsigned long rate,
>> +	unsigned long prate,
>> +	unsigned int fbdiv,
>> +	unsigned int refdiv,
>> +	unsigned int *postdiv1,
>> +	unsigned int *postdiv2)
> This is not the coding style btw.
Agree, will fix this.
>> +{
>> +	int index = 0;
>> +	int ret = 0;
>> +	u64 tmp0;
>> +
>> +	/* prate/REFDIV and result save to tmp0 */
>> +	tmp0 = prate;
>> +	do_div(tmp0, refdiv);
>> +
>> +	/* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
>> +	tmp0 *= fbdiv;
>> +
>> +	/* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
>> +	do_div(tmp0, rate);
>> +
>> +	/* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
>> +	if (tmp0 <= 7) {
>> +		/* (div1 * div2) <= 7, no need to use array search */
>> +		*postdiv1 = tmp0;
>> +		*postdiv2 = 1;
>> +	} else {
>> +		/* (div1 * div2) > 7, use array search */
>> +		for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
>> +			if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
>> +				continue;
>> +			} else {
>> +				/* found it */
>> +				break;
>> +			}
>> +		}
>> +		if (index < ARRAY_SIZE(postdiv1_2)) {
>> +			*postdiv1 = postdiv1_2[index][1];
>> +			*postdiv2 = postdiv1_2[index][0];
>> +		} else {
>> +			pr_debug("%s can not find in postdiv array!\n", __func__);
>> +			ret = -EINVAL;
>> +		}
>> +	}
>> +
>> +	return ret;
>> +}
> Reading this function it makes me wonder if (and I am far from the best
> person to comment, someone like Stephen is vastly more qualified) you
> should model this as several "stages", each implemented by the
> "standard" clocks - like clk_divider etc. The code here is quite
> complicated IMO as it seems to be trying to implement several stages of
> division in one go.

The objective of __sg2042_pll_get_postdiv_1_2() is straightforward: 
based on the formula defined by the TRM, with input 
rate/prate/fbdiv/refdiv, we can get the possiblle combination of 
POSTDIV1 and POSTDIV2 by looking up the table of postdiv1_2. We will 
later use it to setup the clock register.

Though the codes looks a bit complicated, but accually it is calculate 
with the formula : POSTDIV = (prate/REFDIV) x FBDIV/rate, I just 
separate it into several steps to make it easy to understand, I have 
listed the formula in the comment on top of the function.

>
> There's quite a lot in the driver and I will admit that I have not read
> it all my any means (I skimmed from here onwards), but in general my
> advice would be to try and reuse the generic code as much as possible.
Agree, I will double check and try to optimize the code in next revision.
>
> Thanks,
> Conor.
>
......

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 4290 bytes --]

On Tue, Dec 12, 2023 at 10:22:28AM +0800, Chen Wang wrote:

> On 2023/12/9 0:47, Conor Dooley wrote:
> > On Fri, Dec 08, 2023 at 09:14:32AM +0800, Chen Wang wrote:

> > > +#define ENCODE_PLL_CTRL(fbdiv, p1, p2, refdiv) \
> > > +	(((fbdiv & 0xfff) << 16) | ((p2 & 0x7) << 12) | ((p1 & 0x7) << 8) | (refdiv & 0x3f))
> > IMO this should be a function not a macro.

> Would like to listen why it should be a function instead of a macro? Any
> experiences you can share with me?

Readability. A function, which could be inlined allows you to break this
up and make it easier to read.

> > > +/*
> > > + * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
> > > + * to get the closest postdiiv combination.
> > > + * @rate: FOUTPOSTDIV
> > > + * @prate: parent rate, i.e. FREF
> > > + * @fbdiv: FBDIV
> > > + * @refdiv: REFDIV
> > > + * @postdiv1: POSTDIV1, output
> > > + * @postdiv2: POSTDIV2, output
> > > + * See TRM:
> > > + * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
> > > + * So we get following formula to get POSTDIV1 and POSTDIV2:
> > > + * POSTDIV = (prate/REFDIV) x FBDIV/rate
> > > + * above POSTDIV = POSTDIV1*POSTDIV2
> > > + */
> > > +static int __sg2042_pll_get_postdiv_1_2(
> > > +	unsigned long rate,
> > > +	unsigned long prate,
> > > +	unsigned int fbdiv,
> > > +	unsigned int refdiv,
> > > +	unsigned int *postdiv1,
> > > +	unsigned int *postdiv2)
> > This is not the coding style btw.
> Agree, will fix this.
> > > +{
> > > +	int index = 0;
> > > +	int ret = 0;
> > > +	u64 tmp0;
> > > +
> > > +	/* prate/REFDIV and result save to tmp0 */
> > > +	tmp0 = prate;
> > > +	do_div(tmp0, refdiv);
> > > +
> > > +	/* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
> > > +	tmp0 *= fbdiv;
> > > +
> > > +	/* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
> > > +	do_div(tmp0, rate);
> > > +
> > > +	/* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
> > > +	if (tmp0 <= 7) {
> > > +		/* (div1 * div2) <= 7, no need to use array search */
> > > +		*postdiv1 = tmp0;
> > > +		*postdiv2 = 1;
> > > +	} else {
> > > +		/* (div1 * div2) > 7, use array search */
> > > +		for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
> > > +			if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
> > > +				continue;
> > > +			} else {
> > > +				/* found it */
> > > +				break;
> > > +			}
> > > +		}
> > > +		if (index < ARRAY_SIZE(postdiv1_2)) {
> > > +			*postdiv1 = postdiv1_2[index][1];
> > > +			*postdiv2 = postdiv1_2[index][0];
> > > +		} else {
> > > +			pr_debug("%s can not find in postdiv array!\n", __func__);
> > > +			ret = -EINVAL;
> > > +		}
> > > +	}
> > > +
> > > +	return ret;
> > > +}
> > Reading this function it makes me wonder if (and I am far from the best
> > person to comment, someone like Stephen is vastly more qualified) you
> > should model this as several "stages", each implemented by the
> > "standard" clocks - like clk_divider etc. The code here is quite
> > complicated IMO as it seems to be trying to implement several stages of
> > division in one go.
> 
> The objective of __sg2042_pll_get_postdiv_1_2() is straightforward: based on
> the formula defined by the TRM, with input rate/prate/fbdiv/refdiv, we can
> get the possiblle combination of POSTDIV1 and POSTDIV2 by looking up the
> table of postdiv1_2. We will later use it to setup the clock register.
> 
> Though the codes looks a bit complicated, but accually it is calculate with
> the formula : POSTDIV = (prate/REFDIV) x FBDIV/rate, I just separate it into
> several steps to make it easy to understand, I have listed the formula in
> the comment on top of the function.

I understand what you are doing, I did something similar myself
previously. My suggestion/question was about using the "standard" types
of clock that the core provides to represent as many of the clocks in
this driver as is feasible.

> > There's quite a lot in the driver and I will admit that I have not read
> > it all my any means (I skimmed from here onwards), but in general my
> > advice would be to try and reuse the generic code as much as possible.
> Agree, I will double check and try to optimize the code in next revision.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver

[Stephen Boyd]

Quoting Conor Dooley (2023-12-12 00:37:39)
> On Tue, Dec 12, 2023 at 10:22:28AM +0800, Chen Wang wrote:
> 
> > On 2023/12/9 0:47, Conor Dooley wrote:
> > > On Fri, Dec 08, 2023 at 09:14:32AM +0800, Chen Wang wrote:
> 
> > > > +#define ENCODE_PLL_CTRL(fbdiv, p1, p2, refdiv) \
> > > > + (((fbdiv & 0xfff) << 16) | ((p2 & 0x7) << 12) | ((p1 & 0x7) << 8) | (refdiv & 0x3f))
> > > IMO this should be a function not a macro.
> 
> > Would like to listen why it should be a function instead of a macro? Any
> > experiences you can share with me?
> 
> Readability. A function, which could be inlined allows you to break this
> up and make it easier to read.
> 
> > > > +/*
> > > > + * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
> > > > + * to get the closest postdiiv combination.
> > > > + * @rate: FOUTPOSTDIV
> > > > + * @prate: parent rate, i.e. FREF
> > > > + * @fbdiv: FBDIV
> > > > + * @refdiv: REFDIV
> > > > + * @postdiv1: POSTDIV1, output
> > > > + * @postdiv2: POSTDIV2, output
> > > > + * See TRM:
> > > > + * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
> > > > + * So we get following formula to get POSTDIV1 and POSTDIV2:
> > > > + * POSTDIV = (prate/REFDIV) x FBDIV/rate
> > > > + * above POSTDIV = POSTDIV1*POSTDIV2
> > > > + */
> > > > +static int __sg2042_pll_get_postdiv_1_2(
> > > > + unsigned long rate,
> > > > + unsigned long prate,
> > > > + unsigned int fbdiv,
> > > > + unsigned int refdiv,
> > > > + unsigned int *postdiv1,
> > > > + unsigned int *postdiv2)
> > > This is not the coding style btw.
> > Agree, will fix this.
> > > > +{
> > > > + int index = 0;
> > > > + int ret = 0;
> > > > + u64 tmp0;
> > > > +
> > > > + /* prate/REFDIV and result save to tmp0 */
> > > > + tmp0 = prate;
> > > > + do_div(tmp0, refdiv);
> > > > +
> > > > + /* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
> > > > + tmp0 *= fbdiv;
> > > > +
> > > > + /* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
> > > > + do_div(tmp0, rate);
> > > > +
> > > > + /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
> > > > + if (tmp0 <= 7) {
> > > > +         /* (div1 * div2) <= 7, no need to use array search */
> > > > +         *postdiv1 = tmp0;
> > > > +         *postdiv2 = 1;

why not return 0 here?

> > > > + } else {

And then de-indent this?

> > > > +         /* (div1 * div2) > 7, use array search */
> > > > +         for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
> > > > +                 if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
> > > > +                         continue;
> > > > +                 } else {
> > > > +                         /* found it */
> > > > +                         break;

This can also return?

> > > > +                 }
> > > > +         }
> > > > +         if (index < ARRAY_SIZE(postdiv1_2)) {

And this condition can be removed.

> > > > +                 *postdiv1 = postdiv1_2[index][1];
> > > > +                 *postdiv2 = postdiv1_2[index][0];
> > > > +         } else {

This can be the default after the loop.

> > > > +                 pr_debug("%s can not find in postdiv array!\n", __func__);
> > > > +                 ret = -EINVAL;


 /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
 if (tmp0 <= 7) {
         /* (div1 * div2) <= 7, no need to use array search */
         *postdiv1 = tmp0;
         *postdiv2 = 1;
	 return 0;
 }

 /* (div1 * div2) > 7, use array search */
 for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
	 if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
		 continue;
	 } else {
		 *postdiv1 = postdiv1_2[index][1];
		 *postdiv2 = postdiv1_2[index][0];
		 return 0;
	 }
 }
 pr_debug("%s can not find in postdiv array!\n", __func__);
 return -EINVAL;

> > > Reading this function it makes me wonder if (and I am far from the best
> > > person to comment, someone like Stephen is vastly more qualified) you
> > > should model this as several "stages", each implemented by the
> > > "standard" clocks - like clk_divider etc. The code here is quite
> > > complicated IMO as it seems to be trying to implement several stages of
> > > division in one go.
> > 
> > The objective of __sg2042_pll_get_postdiv_1_2() is straightforward: based on
> > the formula defined by the TRM, with input rate/prate/fbdiv/refdiv, we can
> > get the possiblle combination of POSTDIV1 and POSTDIV2 by looking up the
> > table of postdiv1_2. We will later use it to setup the clock register.
> > 
> > Though the codes looks a bit complicated, but accually it is calculate with
> > the formula : POSTDIV = (prate/REFDIV) x FBDIV/rate, I just separate it into
> > several steps to make it easy to understand, I have listed the formula in
> > the comment on top of the function.
> 
> I understand what you are doing, I did something similar myself
> previously. My suggestion/question was about using the "standard" types
> of clock that the core provides to represent as many of the clocks in
> this driver as is feasible.

I would not twist the code to conform with the basic clk types. If
possible it would be good to use the helpers for these things, but I
wouldn't split up a clk that is a complex divider with multiple stages
of division into the basic types just to make it fit. I say this because
every clk takes more effort to maintain in the clk tree, it has a name,
pointers, etc. If you can keep that self contained and logically it is
really one clk, then go for it.

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver

[Chen Wang]

On 2023/12/14 8:15, Stephen Boyd wrote:
> Quoting Conor Dooley (2023-12-12 00:37:39)
>> On Tue, Dec 12, 2023 at 10:22:28AM +0800, Chen Wang wrote:
>>
>>> On 2023/12/9 0:47, Conor Dooley wrote:
>>>> On Fri, Dec 08, 2023 at 09:14:32AM +0800, Chen Wang wrote:
>>>>> +#define ENCODE_PLL_CTRL(fbdiv, p1, p2, refdiv) \
>>>>> + (((fbdiv & 0xfff) << 16) | ((p2 & 0x7) << 12) | ((p1 & 0x7) << 8) | (refdiv & 0x3f))
>>>> IMO this should be a function not a macro.
>>> Would like to listen why it should be a function instead of a macro? Any
>>> experiences you can share with me?
>> Readability. A function, which could be inlined allows you to break this
>> up and make it easier to read.
>>
>>>>> +/*
>>>>> + * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
>>>>> + * to get the closest postdiiv combination.
>>>>> + * @rate: FOUTPOSTDIV
>>>>> + * @prate: parent rate, i.e. FREF
>>>>> + * @fbdiv: FBDIV
>>>>> + * @refdiv: REFDIV
>>>>> + * @postdiv1: POSTDIV1, output
>>>>> + * @postdiv2: POSTDIV2, output
>>>>> + * See TRM:
>>>>> + * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
>>>>> + * So we get following formula to get POSTDIV1 and POSTDIV2:
>>>>> + * POSTDIV = (prate/REFDIV) x FBDIV/rate
>>>>> + * above POSTDIV = POSTDIV1*POSTDIV2
>>>>> + */
>>>>> +static int __sg2042_pll_get_postdiv_1_2(
>>>>> + unsigned long rate,
>>>>> + unsigned long prate,
>>>>> + unsigned int fbdiv,
>>>>> + unsigned int refdiv,
>>>>> + unsigned int *postdiv1,
>>>>> + unsigned int *postdiv2)
>>>> This is not the coding style btw.
>>> Agree, will fix this.
>>>>> +{
>>>>> + int index = 0;
>>>>> + int ret = 0;
>>>>> + u64 tmp0;
>>>>> +
>>>>> + /* prate/REFDIV and result save to tmp0 */
>>>>> + tmp0 = prate;
>>>>> + do_div(tmp0, refdiv);
>>>>> +
>>>>> + /* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
>>>>> + tmp0 *= fbdiv;
>>>>> +
>>>>> + /* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
>>>>> + do_div(tmp0, rate);
>>>>> +
>>>>> + /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
>>>>> + if (tmp0 <= 7) {
>>>>> +         /* (div1 * div2) <= 7, no need to use array search */
>>>>> +         *postdiv1 = tmp0;
>>>>> +         *postdiv2 = 1;
> why not return 0 here?
>
>>>>> + } else {
> And then de-indent this?
>
>>>>> +         /* (div1 * div2) > 7, use array search */
>>>>> +         for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
>>>>> +                 if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
>>>>> +                         continue;
>>>>> +                 } else {
>>>>> +                         /* found it */
>>>>> +                         break;
> This can also return?
>
>>>>> +                 }
>>>>> +         }
>>>>> +         if (index < ARRAY_SIZE(postdiv1_2)) {
> And this condition can be removed.
>
>>>>> +                 *postdiv1 = postdiv1_2[index][1];
>>>>> +                 *postdiv2 = postdiv1_2[index][0];
>>>>> +         } else {
> This can be the default after the loop.
>
>>>>> +                 pr_debug("%s can not find in postdiv array!\n", __func__);
>>>>> +                 ret = -EINVAL;
>
>   /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
>   if (tmp0 <= 7) {
>           /* (div1 * div2) <= 7, no need to use array search */
>           *postdiv1 = tmp0;
>           *postdiv2 = 1;
> 	 return 0;
>   }
>
>   /* (div1 * div2) > 7, use array search */
>   for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
> 	 if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
> 		 continue;
> 	 } else {
> 		 *postdiv1 = postdiv1_2[index][1];
> 		 *postdiv2 = postdiv1_2[index][0];
> 		 return 0;
> 	 }
>   }
>   pr_debug("%s can not find in postdiv array!\n", __func__);
>   return -EINVAL;
Thanks, Stephen, I will improve this.
>>>> Reading this function it makes me wonder if (and I am far from the best
>>>> person to comment, someone like Stephen is vastly more qualified) you
>>>> should model this as several "stages", each implemented by the
>>>> "standard" clocks - like clk_divider etc. The code here is quite
>>>> complicated IMO as it seems to be trying to implement several stages of
>>>> division in one go.
>>> The objective of __sg2042_pll_get_postdiv_1_2() is straightforward: based on
>>> the formula defined by the TRM, with input rate/prate/fbdiv/refdiv, we can
>>> get the possiblle combination of POSTDIV1 and POSTDIV2 by looking up the
>>> table of postdiv1_2. We will later use it to setup the clock register.
>>>
>>> Though the codes looks a bit complicated, but accually it is calculate with
>>> the formula : POSTDIV = (prate/REFDIV) x FBDIV/rate, I just separate it into
>>> several steps to make it easy to understand, I have listed the formula in
>>> the comment on top of the function.
>> I understand what you are doing, I did something similar myself
>> previously. My suggestion/question was about using the "standard" types
>> of clock that the core provides to represent as many of the clocks in
>> this driver as is feasible.
> I would not twist the code to conform with the basic clk types. If
> possible it would be good to use the helpers for these things, but I
> wouldn't split up a clk that is a complex divider with multiple stages
> of division into the basic types just to make it fit. I say this because
> every clk takes more effort to maintain in the clk tree, it has a name,
> pointers, etc. If you can keep that self contained and logically it is
> really one clk, then go for it.

Thanks, I will double check if we can reuse "standard" types of clock as 
much as possible, or just keep current way.



_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver

[Dan Carpenter]

Hi Chen,

kernel test robot noticed the following build warnings:

url:    https://github.com/intel-lab-lkp/linux/commits/Chen-Wang/dt-bindings-soc-sophgo-Add-Sophgo-system-control-module/20231208-091702
base:   b85ea95d086471afb4ad062012a4d73cd328fa86
patch link:    https://lore.kernel.org/r/d1aa4f76f360ebd7b790a4786641f1b0188dbba8.1701997033.git.unicorn_wang%40outlook.com
patch subject: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver
config: xtensa-randconfig-r071-20231208 (https://download.01.org/0day-ci/archive/20231208/202312081933.MUdHNASt-lkp@intel.com/config)
compiler: xtensa-linux-gcc (GCC) 13.2.0
reproduce: (https://download.01.org/0day-ci/archive/20231208/202312081933.MUdHNASt-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
| Closes: https://lore.kernel.org/r/202312081933.MUdHNASt-lkp@intel.com/

smatch warnings:
drivers/clk/sophgo/clk-sophgo-sg2042.c:1282 sg2042_clk_init_clk_data() warn: passing zero to 'PTR_ERR'

vim +/PTR_ERR +1282 drivers/clk/sophgo/clk-sophgo-sg2042.c

7c68ebea1041f9 Chen Wang 2023-12-08  1258  static int __init sg2042_clk_init_clk_data(
7c68ebea1041f9 Chen Wang 2023-12-08  1259  	struct device_node *node,
7c68ebea1041f9 Chen Wang 2023-12-08  1260  	int num_clks,
7c68ebea1041f9 Chen Wang 2023-12-08  1261  	struct sg2042_clk_data **pp_clk_data)
7c68ebea1041f9 Chen Wang 2023-12-08  1262  {
7c68ebea1041f9 Chen Wang 2023-12-08  1263  	int ret = 0;
7c68ebea1041f9 Chen Wang 2023-12-08  1264  	struct sg2042_clk_data *clk_data = NULL;
7c68ebea1041f9 Chen Wang 2023-12-08  1265  	struct device_node *np_syscon;
7c68ebea1041f9 Chen Wang 2023-12-08  1266  
7c68ebea1041f9 Chen Wang 2023-12-08  1267  	np_syscon = of_parse_phandle(node, "sophgo,system-ctrl", 0);
7c68ebea1041f9 Chen Wang 2023-12-08  1268  	if (!np_syscon) {
7c68ebea1041f9 Chen Wang 2023-12-08  1269  		pr_err("failed to get system-ctrl node\n");
7c68ebea1041f9 Chen Wang 2023-12-08  1270  		ret = -EINVAL;
7c68ebea1041f9 Chen Wang 2023-12-08  1271  		goto error_out;
7c68ebea1041f9 Chen Wang 2023-12-08  1272  	}
7c68ebea1041f9 Chen Wang 2023-12-08  1273  
7c68ebea1041f9 Chen Wang 2023-12-08  1274  	clk_data = kzalloc(struct_size(clk_data, onecell_data.hws, num_clks), GFP_KERNEL);
7c68ebea1041f9 Chen Wang 2023-12-08  1275  	if (!clk_data) {
7c68ebea1041f9 Chen Wang 2023-12-08  1276  		ret = -ENOMEM;
7c68ebea1041f9 Chen Wang 2023-12-08  1277  		goto error_out;
7c68ebea1041f9 Chen Wang 2023-12-08  1278  	}
7c68ebea1041f9 Chen Wang 2023-12-08  1279  
7c68ebea1041f9 Chen Wang 2023-12-08  1280  	clk_data->regmap_syscon = device_node_to_regmap(np_syscon);
7c68ebea1041f9 Chen Wang 2023-12-08  1281  	if (IS_ERR_OR_NULL(clk_data->regmap_syscon)) {
7c68ebea1041f9 Chen Wang 2023-12-08 @1282  		pr_err("cannot get regmap_syscon %ld\n", PTR_ERR(clk_data->regmap_syscon));

I don't think device_node_to_regmap() can return NULL, but if it could
then it shouldn't be handled like this:

https://staticthinking.wordpress.com/2022/08/01/mixing-error-pointers-and-null/


7c68ebea1041f9 Chen Wang 2023-12-08  1283  		ret = -ENODEV;
7c68ebea1041f9 Chen Wang 2023-12-08  1284  		goto cleanup;
7c68ebea1041f9 Chen Wang 2023-12-08  1285  	}
7c68ebea1041f9 Chen Wang 2023-12-08  1286  	clk_data->iobase_syscon = of_iomap(np_syscon, 0);
7c68ebea1041f9 Chen Wang 2023-12-08  1287  	clk_data->iobase = of_iomap(node, 0);
7c68ebea1041f9 Chen Wang 2023-12-08  1288  	clk_data->onecell_data.num = num_clks;
7c68ebea1041f9 Chen Wang 2023-12-08  1289  
7c68ebea1041f9 Chen Wang 2023-12-08  1290  	*pp_clk_data = clk_data;
7c68ebea1041f9 Chen Wang 2023-12-08  1291  	return ret;
7c68ebea1041f9 Chen Wang 2023-12-08  1292  
7c68ebea1041f9 Chen Wang 2023-12-08  1293  cleanup:
7c68ebea1041f9 Chen Wang 2023-12-08  1294  	kfree(clk_data);
7c68ebea1041f9 Chen Wang 2023-12-08  1295  
7c68ebea1041f9 Chen Wang 2023-12-08  1296  error_out:
7c68ebea1041f9 Chen Wang 2023-12-08  1297  	return ret;
7c68ebea1041f9 Chen Wang 2023-12-08  1298  }

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver

[Chen Wang]

On 2023/12/9 14:22, Dan Carpenter wrote:
> Hi Chen,
>
> kernel test robot noticed the following build warnings:
>
> url:    https://github.com/intel-lab-lkp/linux/commits/Chen-Wang/dt-bindings-soc-sophgo-Add-Sophgo-system-control-module/20231208-091702
> base:   b85ea95d086471afb4ad062012a4d73cd328fa86
> patch link:    https://lore.kernel.org/r/d1aa4f76f360ebd7b790a4786641f1b0188dbba8.1701997033.git.unicorn_wang%40outlook.com
> patch subject: [PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver
> config: xtensa-randconfig-r071-20231208 (https://download.01.org/0day-ci/archive/20231208/202312081933.MUdHNASt-lkp@intel.com/config)
> compiler: xtensa-linux-gcc (GCC) 13.2.0
> reproduce: (https://download.01.org/0day-ci/archive/20231208/202312081933.MUdHNASt-lkp@intel.com/reproduce)
>
> If you fix the issue in a separate patch/commit (i.e. not just a new version of
> the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
> | Closes: https://lore.kernel.org/r/202312081933.MUdHNASt-lkp@intel.com/
>
> smatch warnings:
> drivers/clk/sophgo/clk-sophgo-sg2042.c:1282 sg2042_clk_init_clk_data() warn: passing zero to 'PTR_ERR'
Thank you, Dan. I will try to remove this warning in next revision.
>
> vim +/PTR_ERR +1282 drivers/clk/sophgo/clk-sophgo-sg2042.c
>
> 7c68ebea1041f9 Chen Wang 2023-12-08  1258  static int __init sg2042_clk_init_clk_data(
> 7c68ebea1041f9 Chen Wang 2023-12-08  1259  	struct device_node *node,
> 7c68ebea1041f9 Chen Wang 2023-12-08  1260  	int num_clks,
> 7c68ebea1041f9 Chen Wang 2023-12-08  1261  	struct sg2042_clk_data **pp_clk_data)
> 7c68ebea1041f9 Chen Wang 2023-12-08  1262  {
> 7c68ebea1041f9 Chen Wang 2023-12-08  1263  	int ret = 0;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1264  	struct sg2042_clk_data *clk_data = NULL;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1265  	struct device_node *np_syscon;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1266
> 7c68ebea1041f9 Chen Wang 2023-12-08  1267  	np_syscon = of_parse_phandle(node, "sophgo,system-ctrl", 0);
> 7c68ebea1041f9 Chen Wang 2023-12-08  1268  	if (!np_syscon) {
> 7c68ebea1041f9 Chen Wang 2023-12-08  1269  		pr_err("failed to get system-ctrl node\n");
> 7c68ebea1041f9 Chen Wang 2023-12-08  1270  		ret = -EINVAL;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1271  		goto error_out;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1272  	}
> 7c68ebea1041f9 Chen Wang 2023-12-08  1273
> 7c68ebea1041f9 Chen Wang 2023-12-08  1274  	clk_data = kzalloc(struct_size(clk_data, onecell_data.hws, num_clks), GFP_KERNEL);
> 7c68ebea1041f9 Chen Wang 2023-12-08  1275  	if (!clk_data) {
> 7c68ebea1041f9 Chen Wang 2023-12-08  1276  		ret = -ENOMEM;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1277  		goto error_out;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1278  	}
> 7c68ebea1041f9 Chen Wang 2023-12-08  1279
> 7c68ebea1041f9 Chen Wang 2023-12-08  1280  	clk_data->regmap_syscon = device_node_to_regmap(np_syscon);
> 7c68ebea1041f9 Chen Wang 2023-12-08  1281  	if (IS_ERR_OR_NULL(clk_data->regmap_syscon)) {
> 7c68ebea1041f9 Chen Wang 2023-12-08 @1282  		pr_err("cannot get regmap_syscon %ld\n", PTR_ERR(clk_data->regmap_syscon));
>
> I don't think device_node_to_regmap() can return NULL, but if it could
> then it shouldn't be handled like this:
>
> https://staticthinking.wordpress.com/2022/08/01/mixing-error-pointers-and-null/
>
>
> 7c68ebea1041f9 Chen Wang 2023-12-08  1283  		ret = -ENODEV;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1284  		goto cleanup;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1285  	}
> 7c68ebea1041f9 Chen Wang 2023-12-08  1286  	clk_data->iobase_syscon = of_iomap(np_syscon, 0);
> 7c68ebea1041f9 Chen Wang 2023-12-08  1287  	clk_data->iobase = of_iomap(node, 0);
> 7c68ebea1041f9 Chen Wang 2023-12-08  1288  	clk_data->onecell_data.num = num_clks;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1289
> 7c68ebea1041f9 Chen Wang 2023-12-08  1290  	*pp_clk_data = clk_data;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1291  	return ret;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1292
> 7c68ebea1041f9 Chen Wang 2023-12-08  1293  cleanup:
> 7c68ebea1041f9 Chen Wang 2023-12-08  1294  	kfree(clk_data);
> 7c68ebea1041f9 Chen Wang 2023-12-08  1295
> 7c68ebea1041f9 Chen Wang 2023-12-08  1296  error_out:
> 7c68ebea1041f9 Chen Wang 2023-12-08  1297  	return ret;
> 7c68ebea1041f9 Chen Wang 2023-12-08  1298  }
>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 4/4] riscv: dts: add clock generator for Sophgo SG2042 SoC

[Chen Wang]

From: Chen Wang <unicorn_wang@outlook.com>

Add clock generator node to device tree for SG2042, and enable clock for
uart.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---
 .../boot/dts/sophgo/sg2042-milkv-pioneer.dts  |  4 +
 arch/riscv/boot/dts/sophgo/sg2042.dtsi        | 79 +++++++++++++++++++
 2 files changed, 83 insertions(+)

diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index 49b4b9c2c101..0b3b3b2b0c64 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -14,6 +14,10 @@ chosen {
 	};
 };
 
+&cgi {
+	clock-frequency = <25000000>;
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 93256540d078..f08c41dda216 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/sophgo,sg2042-clkgen.h>
 
 #include "sg2042-cpus.dtsi"
 
@@ -18,6 +19,12 @@ aliases {
 		serial0 = &uart0;
 	};
 
+	cgi: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "cgi";
+		#clock-cells = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -311,12 +318,84 @@ intc: interrupt-controller@7090000000 {
 			riscv,ndev = <224>;
 		};
 
+		sys_ctrl: system-controller@7030010000 {
+			compatible = "sophgo,sg2042-sysctrl";
+			reg = <0x70 0x30010000 0x0 0x1000>;
+		};
+
+		clkgen: clock-controller@7030012000 {
+			compatible = "sophgo,sg2042-clkgen";
+			reg = <0x70 0x30012000 0x0 0x1000>;
+			sophgo,system-ctrl = <&sys_ctrl>;
+			#clock-cells = <1>;
+			clocks = <&cgi>;
+			assigned-clocks = \
+				<&clkgen DIV_CLK_FPLL_RP_CPU_NORMAL_1>,
+				<&clkgen DIV_CLK_FPLL_50M_A53>,
+				<&clkgen DIV_CLK_FPLL_TOP_RP_CMN_DIV2>,
+				<&clkgen DIV_CLK_FPLL_UART_500M>,
+				<&clkgen DIV_CLK_FPLL_AHB_LPC>,
+				<&clkgen DIV_CLK_FPLL_EFUSE>,
+				<&clkgen DIV_CLK_FPLL_TX_ETH0>,
+				<&clkgen DIV_CLK_FPLL_PTP_REF_I_ETH0>,
+				<&clkgen DIV_CLK_FPLL_REF_ETH0>,
+				<&clkgen DIV_CLK_FPLL_EMMC>,
+				<&clkgen DIV_CLK_FPLL_SD>,
+				<&clkgen DIV_CLK_FPLL_TOP_AXI0>,
+				<&clkgen DIV_CLK_FPLL_TOP_AXI_HSPERI>,
+				<&clkgen DIV_CLK_FPLL_AXI_DDR_1>,
+				<&clkgen DIV_CLK_FPLL_DIV_TIMER1>,
+				<&clkgen DIV_CLK_FPLL_DIV_TIMER2>,
+				<&clkgen DIV_CLK_FPLL_DIV_TIMER3>,
+				<&clkgen DIV_CLK_FPLL_DIV_TIMER4>,
+				<&clkgen DIV_CLK_FPLL_DIV_TIMER5>,
+				<&clkgen DIV_CLK_FPLL_DIV_TIMER6>,
+				<&clkgen DIV_CLK_FPLL_DIV_TIMER7>,
+				<&clkgen DIV_CLK_FPLL_DIV_TIMER8>,
+				<&clkgen DIV_CLK_FPLL_100K_EMMC>,
+				<&clkgen DIV_CLK_FPLL_100K_SD>,
+				<&clkgen DIV_CLK_FPLL_GPIO_DB>,
+				<&clkgen DIV_CLK_MPLL_RP_CPU_NORMAL_0>,
+				<&clkgen DIV_CLK_MPLL_AXI_DDR_0>;
+			assigned-clock-rates = \
+				<2000000000>,
+				<50000000>,
+				<1000000000>,
+				<500000000>,
+				<200000000>,
+				<25000000>,
+				<125000000>,
+				<50000000>,
+				<25000000>,
+				<100000000>,
+				<100000000>,
+				<100000000>,
+				<250000000>,
+				<1000000000>,
+				<50000000>,
+				<50000000>,
+				<50000000>,
+				<50000000>,
+				<50000000>,
+				<50000000>,
+				<50000000>,
+				<50000000>,
+				<100000>,
+				<100000>,
+				<100000>,
+				<2000000000>,
+				<1000000000>;
+		};
+
 		uart0: serial@7040000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00000070 0x40000000 0x00000000 0x00001000>;
 			interrupt-parent = <&intc>;
 			interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <500000000>;
+			clocks = <&clkgen GATE_CLK_UART_500M>,
+				 <&clkgen GATE_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 0/4] riscv: sophgo: add clock support for sg2042

[Chen Wang]

On 2023/12/8 9:13, Chen Wang wrote:
> From: Chen Wang <unicorn_wang@outlook.com>
>
> This series adds clock controller support for sophgo sg2042.
>
> Thanks,
> Chen
>
> ---

Hi，Conor，

Can you please have a review of this patch?
And I'm not sure if you are ok to pick up this patch so it can be merged 
into the next v6.8?

Thanks,

Chen


> Changes in v6:
>    The patch series is based on v6.7-rc1. You can simply review or test the
>    patches at the link [7].
>    - fixed some warnings/errors reported by kernel test robot <lkp@intel.com>.
>
> Changes in v5:
>    The patch series is based on v6.7-rc1. You can simply review or test the
>    patches at the link [6].
>    - dt-bindings: improved yaml, such as:
>      - add vendor prefix for system-ctrl property for clock generator.
>      - Add explanation for system-ctrl property.
>    - move sophgo,sg2042-clkgen.yaml to directly under clock folder.
>    - fixed bugs for driver Makefile/Kconfig
>    - continue cleaning-up debug print for driver code.
>
> Changes in v4:
>    The patch series is based on v6.7-rc1. You can simply review or test the
>    patches at the link [5].
>    - dt-bindings: fixed a dt_binding_check error.
>
> Changes in v3:
>    The patch series is based on v6.7-rc1. You can simply review or test the
>    patches at the link [3].
>    - DTS: don't use syscon but define sg2042 specific system control node. More
>      background info can read [4].
>    - Updating minor issues in dt-bindings as per input from reviews.
>
> Changes in v2:
>    The patch series is based on v6.7-rc1. You can simply review or test the
>    patches at the link [2].
>    - Squashed the patch adding clock definitions with the patch adding the
>      binding for the clock controller.
>    - Updating dt-binding for syscon, remove oneOf for property compatible;
>      define clock controller as child of syscon.
>    - DTS changes: merge sg2042-clock.dtsi into sg2042.dtsi; move clock-frequency
>      property of osc to board devicethree due to the oscillator is outside the
>      SoC.
>    - Fixed some bugs in driver code during testing, including removing warnings
>      for rv32_defconfig.
>    - Updated MAINTAINERS info.
>
> Changes in v1:
>    The patch series is based on v6.7-rc1. You can simply review or test the
>    patches at the link [1].
>
> Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v1 [1]
> Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v2 [2]
> Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v3 [3]
> Link: https://lore.kernel.org/linux-riscv/MA0P287MB03329AE180378E1A2E034374FE82A@MA0P287MB0332.INDP287.PROD.OUTLOOK.COM/ [4]
> Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v4 [5]
> Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v5 [6]
> Link: https://github.com/unicornx/linux-riscv/commits/upstream-sg2042-clock-v6 [7]
>
> ---
>
> Chen Wang (4):
>    dt-bindings: soc: sophgo: Add Sophgo system control module
>    dt-bindings: clock: sophgo: support SG2042
>    clk: sophgo: Add SG2042 clock generator driver
>    riscv: dts: add clock generator for Sophgo SG2042 SoC
>
>   .../bindings/clock/sophgo,sg2042-clkgen.yaml  |   53 +
>   .../soc/sophgo/sophgo,sg2042-sysctrl.yaml     |   34 +
>   MAINTAINERS                                   |    7 +
>   .../boot/dts/sophgo/sg2042-milkv-pioneer.dts  |    4 +
>   arch/riscv/boot/dts/sophgo/sg2042.dtsi        |   79 +
>   drivers/clk/Kconfig                           |    1 +
>   drivers/clk/Makefile                          |    1 +
>   drivers/clk/sophgo/Kconfig                    |    8 +
>   drivers/clk/sophgo/Makefile                   |    2 +
>   drivers/clk/sophgo/clk-sophgo-sg2042.c        | 1356 +++++++++++++++++
>   drivers/clk/sophgo/clk-sophgo-sg2042.h        |  226 +++
>   .../dt-bindings/clock/sophgo,sg2042-clkgen.h  |  169 ++
>   12 files changed, 1940 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
>   create mode 100644 Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-sysctrl.yaml
>   create mode 100644 drivers/clk/sophgo/Kconfig
>   create mode 100644 drivers/clk/sophgo/Makefile
>   create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.c
>   create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.h
>   create mode 100644 include/dt-bindings/clock/sophgo,sg2042-clkgen.h
>
>
> base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 0/4] riscv: sophgo: add clock support for sg2042

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 830 bytes --]

On Fri, Dec 08, 2023 at 06:11:10PM +0800, Chen Wang wrote:
> On 2023/12/8 9:13, Chen Wang wrote:
> > From: Chen Wang <unicorn_wang@outlook.com>
> > 
> > This series adds clock controller support for sophgo sg2042.
> > 
> > Thanks,
> > Chen
> > 
> > ---
> 
> Hi，Conor，
> 
> Can you please have a review of this patch?

Chief, you sent this patch only the other day, please give people some
time. I, at least, have an MMO addiction to feed in my spare time
alongside reviewing patches.

> And I'm not sure if you are ok to pick up this patch so it can be merged
> into the next v6.8?

Stephen is the maintainer for clock drivers. I do pick things up and
send them to him as PRs when it makes life easier, but usually that's
after other people have reviewed the clock driver itself.

Thanks,
Conor.


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 0/4] riscv: sophgo: add clock support for sg2042

[Chen Wang]

On 2023/12/8 18:30, Conor Dooley wrote:
> On Fri, Dec 08, 2023 at 06:11:10PM +0800, Chen Wang wrote:
>> On 2023/12/8 9:13, Chen Wang wrote:
>>> From: Chen Wang <unicorn_wang@outlook.com>
>>>
>>> This series adds clock controller support for sophgo sg2042.
>>>
>>> Thanks,
>>> Chen
>>>
>>> ---
>> Hi，Conor，
>>
>> Can you please have a review of this patch?
> Chief, you sent this patch only the other day, please give people some
> time. I, at least, have an MMO addiction to feed in my spare time
> alongside reviewing patches.
Okay, no rush. :)

Christmas is coming soon. I wish you a happy holiday in advance.

>> And I'm not sure if you are ok to pick up this patch so it can be merged
>> into the next v6.8?
> Stephen is the maintainer for clock drivers. I do pick things up and
> send them to him as PRs when it makes life easier, but usually that's
> after other people have reviewed the clock driver itself.
>
> Thanks,
> Conor.
>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv