Re: [PATCH] RISC-V: Add _TIF_NEED_RESCHED check for kernel thread when CONFIG_PREEMPT=y

[Vincent Chen <vincentc@andestech.com>]

On Wed, Jan 23, 2019 at 02:58:51AM +0800, Palmer Dabbelt wrote:
> On Wed, 02 Jan 2019 21:45:55 PST (-0800), linux@roeck-us.net wrote:
> > On Thu, Jan 03, 2019 at 11:32:33AM +0800, Vincent Chen wrote:
> >> The cond_resched() can be used to yield the CPU resource if
> >> CONFIG_PREEMPT is not defined. Otherwise, cond_resched() is a dummy
> >> function. In order to avoid kernel thread occupying entire CPU,
> >> when CONFIG_PREEMPT=y, the kernel thread needs to follow the
> >> rescheduling mechanism like a user thread.
> >>
> >> Signed-off-by: Vincent Chen <vincentc@andestech.com>
> >
> > This patch seems to do the trick. I no longer see a problem with
> > CONFIG_PREEMPT=y and the various lock torture tests enabled, as
> > previously reported.
> >
> > Nice catch and fix.
> >
> > Tested-by: Guenter Roeck <linux@roeck-us.net>
> >
> > Guenter
> >
> >> ---
> >>  arch/riscv/kernel/asm-offsets.c |    1 +
> >>  arch/riscv/kernel/entry.S       |   18 +++++++++++++++++-
> >>  2 files changed, 18 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/arch/riscv/kernel/asm-offsets.c b/arch/riscv/kernel/asm-offsets.c
> >> index 6a92a2f..dac9834 100644
> >> --- a/arch/riscv/kernel/asm-offsets.c
> >> +++ b/arch/riscv/kernel/asm-offsets.c
> >> @@ -39,6 +39,7 @@ void asm_offsets(void)
> >>  	OFFSET(TASK_STACK, task_struct, stack);
> >>  	OFFSET(TASK_TI, task_struct, thread_info);
> >>  	OFFSET(TASK_TI_FLAGS, task_struct, thread_info.flags);
> >> +	OFFSET(TASK_TI_PREEMPT_COUNT, task_struct, thread_info.preempt_count);
> >>  	OFFSET(TASK_TI_KERNEL_SP, task_struct, thread_info.kernel_sp);
> >>  	OFFSET(TASK_TI_USER_SP, task_struct, thread_info.user_sp);
> >>  	OFFSET(TASK_TI_CPU, task_struct, thread_info.cpu);
> >> diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
> >> index 13d4826..728b72d 100644
> >> --- a/arch/riscv/kernel/entry.S
> >> +++ b/arch/riscv/kernel/entry.S
> >> @@ -144,6 +144,10 @@ _save_context:
> >>  	REG_L x2,  PT_SP(sp)
> >>  	.endm
> >>
> >> +#if !IS_ENABLED(CONFIG_PREEMPT)
> >> +#define resume_kernel restore_all
> >> +#endif
> >> +
> 
> I don't like preprocessor stuff if we can avoid it, are you OK if I squash in 
> the following diff:
> 
>     diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
>     index cfbad2f689c3..fd9b57c8b4ce 100644
>     --- a/arch/riscv/kernel/entry.S
>     +++ b/arch/riscv/kernel/entry.S
>     @@ -145,7 +145,7 @@ _save_context:
>      	.endm
>     
>      #if !IS_ENABLED(CONFIG_PREEMPT)
>     -#define resume_kernel restore_all
>     +.set resume_kernel, restore_all
>      #endif
>     
>      ENTRY(handle_exception)
> 
> I think that should do the same thing, but at link time instead of in the 
> preprocessor -- that makes it a bit less likely to bit us in the future.
> 
> >>  ENTRY(handle_exception)
> >>  	SAVE_ALL
> >>
> >> @@ -228,7 +232,7 @@ ret_from_exception:
> >>  	REG_L s0, PT_SSTATUS(sp)
> >>  	csrc sstatus, SR_SIE
> >>  	andi s0, s0, SR_SPP
> >> -	bnez s0, restore_all
> >> +	bnez s0, resume_kernel
> >>
> >>  resume_userspace:
> >>  	/* Interrupts must be disabled here so flags are checked atomically */
> >> @@ -250,6 +254,18 @@ restore_all:
> >>  	RESTORE_ALL
> >>  	sret
> >>
> >> +#if IS_ENABLED(CONFIG_PREEMPT)
> >> +resume_kernel:
> >> +	REG_L s0, TASK_TI_PREEMPT_COUNT(tp)
> >> +	bnez s0, restore_all
> >> +need_resched:
> >> +	REG_L s0, TASK_TI_FLAGS(tp)
> >> +	andi s0, s0, _TIF_NEED_RESCHED
> >> +	beqz s0, restore_all
> >> +	call preempt_schedule_irq
> >> +	j need_resched
> >> +#endif
> >> +
> >>  work_pending:
> >>  	/* Enter slow path for supplementary processing */
> >>  	la ra, ret_from_exception
> 
> I'm just going to assume you're OK with the squash and drop this into my plans 
> for the next RC, let me know if that's not OK.
>
> Thanks for fixing this!

  OK, it's fine for me.

  Vincent

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv