public inbox for linux-riscv@lists.infradead.org
 help / color / mirror / Atom feed
From: Nick Kossifidis <mick@ics.forth.gr>
To: palmer@dabbelt.com, paul.walmsley@sifive.com, aou@eecs.berkeley.edu
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Nick Kossifidis <mick@ics.forth.gr>
Subject: [PATCH] RISC-V-fixes: relocate DTB if it's outside memory region
Date: Tue, 22 Mar 2022 15:28:39 +0200	[thread overview]
Message-ID: <20220322132839.3653682-1-mick@ics.forth.gr> (raw)

In case the DTB provided by the bootloader/BootROM is before the kernel
image or outside /memory, we won't be able to access it through the
linear mapping, and get a segfault on setup_arch(). Currently OpenSBI
relocates DTB but that's not always the case (e.g. if FW_JUMP_FDT_ADDR
is not specified), and it's also not the most portable approach since
the default FW_JUMP_FDT_ADDR of the generic platform relocates the DTB
at a specific offset that may not be available. To avoid this situation
copy DTB so that it's visible through the linear mapping.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
---
 arch/riscv/mm/init.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 0d588032d..697a9aed4 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -206,8 +206,25 @@ static void __init setup_bootmem(void)
 	 * early_init_fdt_reserve_self() since __pa() does
 	 * not work for DTB pointers that are fixmap addresses
 	 */
-	if (!IS_ENABLED(CONFIG_BUILTIN_DTB))
-		memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
+	if (!IS_ENABLED(CONFIG_BUILTIN_DTB)) {
+		/*
+		 * In case the DTB is not located in a memory region we won't
+		 * be able to locate it later on via the linear mapping and
+		 * get a segfault when accessing it via __va(dtb_early_pa).
+		 * To avoid this situation copy DTB to a memory region.
+		 * Note that memblock_phys_alloc will also reserve DTB region.
+		 */
+		if (!memblock_is_memory(dtb_early_pa)) {
+			size_t fdt_size = fdt_totalsize(dtb_early_va);
+			phys_addr_t new_dtb_early_pa = memblock_phys_alloc(fdt_size, PAGE_SIZE);
+			void *new_dtb_early_va = early_memremap(new_dtb_early_pa, fdt_size);
+
+			memcpy(new_dtb_early_va, dtb_early_va, fdt_size);
+			early_memunmap(new_dtb_early_va, fdt_size);
+			_dtb_early_pa = new_dtb_early_pa;
+		} else
+			memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
+	}
 
 	early_init_fdt_scan_reserved_mem();
 	dma_contiguous_reserve(dma32_phys_limit);
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2022-03-22 13:29 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-22 13:28 Nick Kossifidis [this message]
2022-03-23 17:21 ` [PATCH] RISC-V-fixes: relocate DTB if it's outside memory region Conor Dooley
2022-03-24  9:37 ` Conor.Dooley
2022-03-27  8:52   ` Nick Kossifidis
2022-04-28 21:48   ` Palmer Dabbelt
2022-04-28 21:58     ` Conor Dooley
2022-04-26  6:11 ` Nick Kossifidis
2022-04-28 21:48   ` Palmer Dabbelt
2022-04-29 15:28     ` Palmer Dabbelt
2022-04-29 19:18       ` Nick Kossifidis
2022-05-06 16:36         ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220322132839.3653682-1-mick@ics.forth.gr \
    --to=mick@ics.forth.gr \
    --cc=aou@eecs.berkeley.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox