From: Sergey Matyukevich <geomatsi@gmail.com>
To: linux-riscv@lists.infradead.org
Cc: Atish Patra <atishp@atishpatra.org>,
Anup Patel <anup@brainfault.org>,
Sergey Matyukevich <geomatsi@gmail.com>,
Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Subject: [PATCH v2 2/2] perf: RISC-V: exclude invalid pmu counters from SBI calls
Date: Fri, 24 Jun 2022 16:59:02 +0300 [thread overview]
Message-ID: <20220624135902.520748-3-geomatsi@gmail.com> (raw)
In-Reply-To: <20220624135902.520748-1-geomatsi@gmail.com>
From: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
SBI firmware may not provide information for some counters in response
to SBI_EXT_PMU_COUNTER_GET_INFO call. Exclude such counters from the
subsequent SBI requests. For this purpose use global mask to keep track
of fully specified counters.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
---
drivers/perf/riscv_pmu_legacy.c | 4 ++--
drivers/perf/riscv_pmu_sbi.c | 22 +++++++++++++---------
include/linux/perf/riscv_pmu.h | 2 +-
3 files changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/perf/riscv_pmu_legacy.c b/drivers/perf/riscv_pmu_legacy.c
index 342778782359..7d7131c47bc0 100644
--- a/drivers/perf/riscv_pmu_legacy.c
+++ b/drivers/perf/riscv_pmu_legacy.c
@@ -14,7 +14,6 @@
#define RISCV_PMU_LEGACY_CYCLE 0
#define RISCV_PMU_LEGACY_INSTRET 1
-#define RISCV_PMU_LEGACY_NUM_CTR 2
static bool pmu_init_done;
@@ -83,7 +82,8 @@ static void pmu_legacy_init(struct riscv_pmu *pmu)
{
pr_info("Legacy PMU implementation is available\n");
- pmu->num_counters = RISCV_PMU_LEGACY_NUM_CTR;
+ pmu->cmask = BIT(RISCV_PMU_LEGACY_CYCLE) |
+ BIT(RISCV_PMU_LEGACY_INSTRET);
pmu->ctr_start = pmu_legacy_ctr_start;
pmu->ctr_stop = NULL;
pmu->event_map = pmu_legacy_event_map;
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index a5d25b51beac..70a3db29427a 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -265,7 +265,6 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
struct sbiret ret;
int idx;
uint64_t cbase = 0;
- uint64_t cmask = GENMASK_ULL(rvpmu->num_counters - 1, 0);
unsigned long cflags = 0;
if (event->attr.exclude_kernel)
@@ -274,8 +273,8 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
cflags |= SBI_PMU_CFG_FLAG_SET_UINH;
/* retrieve the available counter index */
- ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
- cflags, hwc->event_base, hwc->config, 0);
+ ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
+ rvpmu->cmask, cflags, hwc->event_base, hwc->config, 0);
if (ret.error) {
pr_debug("Not able to find a counter for event %lx config %llx\n",
hwc->event_base, hwc->config);
@@ -283,7 +282,7 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
}
idx = ret.value;
- if (idx >= rvpmu->num_counters || !pmu_ctr_list[idx].value)
+ if (!test_bit(idx, &rvpmu->cmask) || !pmu_ctr_list[idx].value)
return -ENOENT;
/* Additional sanity check for the counter id */
@@ -447,7 +446,7 @@ static int pmu_sbi_find_num_ctrs(void)
return sbi_err_map_linux_errno(ret.error);
}
-static int pmu_sbi_get_ctrinfo(int nctr)
+static int pmu_sbi_get_ctrinfo(int nctr, unsigned long *mask)
{
struct sbiret ret;
int i, num_hw_ctr = 0, num_fw_ctr = 0;
@@ -462,6 +461,9 @@ static int pmu_sbi_get_ctrinfo(int nctr)
if (ret.error)
/* The logical counter ids are not expected to be contiguous */
continue;
+
+ *mask |= BIT(i);
+
cinfo.value = ret.value;
if (cinfo.type == SBI_PMU_CTR_TYPE_FW)
num_fw_ctr++;
@@ -482,7 +484,7 @@ static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu)
* which may include counters that are not enabled yet.
*/
sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
- 0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
+ 0, pmu->cmask, 0, 0, 0, 0);
}
static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu)
@@ -696,8 +698,9 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
static int pmu_sbi_device_probe(struct platform_device *pdev)
{
struct riscv_pmu *pmu = NULL;
- int num_counters;
+ unsigned long cmask = 0;
int ret = -ENODEV;
+ int num_counters;
pr_info("SBI PMU extension is available\n");
pmu = riscv_pmu_alloc();
@@ -711,7 +714,7 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
}
/* cache all the information about counters now */
- if (pmu_sbi_get_ctrinfo(num_counters))
+ if (pmu_sbi_get_ctrinfo(num_counters, &cmask))
goto out_free;
ret = pmu_sbi_setup_irqs(pmu, pdev);
@@ -720,7 +723,8 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE;
}
- pmu->num_counters = num_counters;
+
+ pmu->cmask = cmask;
pmu->ctr_start = pmu_sbi_ctr_start;
pmu->ctr_stop = pmu_sbi_ctr_stop;
pmu->event_map = pmu_sbi_event_map;
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index 46f9b6fe306e..60f4373fe581 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -45,7 +45,7 @@ struct riscv_pmu {
irqreturn_t (*handle_irq)(int irq_num, void *dev);
- int num_counters;
+ unsigned long cmask;
u64 (*ctr_read)(struct perf_event *event);
int (*ctr_get_idx)(struct perf_event *event);
int (*ctr_get_width)(int idx);
--
2.36.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-06-24 13:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-24 13:59 [PATCH v2 0/2] perf: RISC-V: fix access beyond allocated array Sergey Matyukevich
2022-06-24 13:59 ` [PATCH v2 1/2] " Sergey Matyukevich
2022-07-11 6:43 ` Sergey Matyukevich
2022-07-11 7:22 ` Atish Patra
2022-07-11 7:22 ` Atish Patra
2022-06-24 13:59 ` Sergey Matyukevich [this message]
2022-08-10 7:06 ` [PATCH v2 0/2] " Sergey Matyukevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220624135902.520748-3-geomatsi@gmail.com \
--to=geomatsi@gmail.com \
--cc=anup@brainfault.org \
--cc=atishp@atishpatra.org \
--cc=linux-riscv@lists.infradead.org \
--cc=sergey.matyukevich@syntacore.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox