[PATCH v5 00/14] PolarFire SoC reset controller & clock cleanups

[Conor Dooley <conor.dooley@microchip.com>]

@Stephen, even if you do not take the rest of the series for v6.1, the
first patch is a bugfix for boot failures that can be trigged with v6.0
so even if you have reservations about the aux device stuff, I would
appreciate if you would take the first patch.

Unfortunately, the rest of the series does have a conflict with/depends
on the fix - so if you do take it on -fixes could you do it as a commit
on top of -rc1 so the rest of the series will apply?

Thanks,
Conor.

Original Cover:
Hey all,

Kinda two things happening in this series, but I sent it together to
ensure the second part would apply correctly.

The first is the reset controller that I promised after discovering the
issue triggered by CONFIG_PM & the phy not coming up correctly. I have
now removed all the messing with resets from clock enable/disable
functions & now use the aux bus to set up a reset controller driver.
Since I needed something to test it, I hooked up the reset for the
Cadence MACB on PolarFire SoC. This has been split into a second series
for v2 (and is now in v6.0-rcN):
https://lore.kernel.org/all/20220704114511.1892332-1-conor.dooley@microchip.com/

The second part adds rate control for the MSS PLL clock, followed by
some simplifications to the driver & conversions of some custom structs
to the corresponding structs in the framework.

I'll take the dts patch myself when the rest of this is okay-ed.
Thanks,
Conor.

Changes since v4:
- use the alternative macro Claudiu suggested for patch 1
- drop a ~useless intermediate variable in mpfs_deassert()

Changes since v3:
- return results directly in probe() & reset_controller_register()

Changes since v2:
- reorder reset Makefile/Kconfig entries
- fix a pre-existing bug exposed by clang with this series applied
- add Padmarao who co-authored the original driver to the authors

Conor Dooley (14):
  clk: microchip: mpfs: fix clk_cfg array bounds violation
  clk: microchip: mpfs: make the rtc's ahb clock critical
  dt-bindings: clk: microchip: mpfs: add reset controller support
  clk: microchip: mpfs: add reset controller
  reset: add polarfire soc reset support
  MAINTAINERS: add polarfire soc reset controller
  riscv: dts: microchip: add mpfs specific macb reset support
  clk: microchip: mpfs: add MSS pll's set & round rate
  clk: microchip: mpfs: move id & offset out of clock structs
  clk: microchip: mpfs: simplify control reg access
  clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo()
  clk: microchip: mpfs: convert cfg_clk to clk_divider
  clk: microchip: mpfs: convert periph_clk to clk_gate
  clk: microchip: mpfs: update module authorship & licencing

 .../bindings/clock/microchip,mpfs.yaml        |  17 +-
 MAINTAINERS                                   |   1 +
 arch/riscv/boot/dts/microchip/mpfs.dtsi       |   7 +-
 drivers/clk/microchip/Kconfig                 |   1 +
 drivers/clk/microchip/clk-mpfs.c              | 384 +++++++++---------
 drivers/reset/Kconfig                         |   7 +
 drivers/reset/Makefile                        |   2 +-
 drivers/reset/reset-mpfs.c                    | 157 +++++++
 include/soc/microchip/mpfs.h                  |   8 +
 9 files changed, 388 insertions(+), 196 deletions(-)
 create mode 100644 drivers/reset/reset-mpfs.c


base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868
-- 
2.36.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv