[PATCH v5 05/14] reset: add polarfire soc reset support

[Conor Dooley <conor.dooley@microchip.com>]

Add support for the resets on Microchip's PolarFire SoC (MPFS).
Reset control is a single register, wedged in between registers for
clock control. To fit with existed DT etc, the reset controller is
created using the aux device framework & set up in the clock driver.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/reset/Kconfig      |   7 ++
 drivers/reset/Makefile     |   2 +-
 drivers/reset/reset-mpfs.c | 157 +++++++++++++++++++++++++++++++++++++
 3 files changed, 165 insertions(+), 1 deletion(-)
 create mode 100644 drivers/reset/reset-mpfs.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 806773e88832..85f7abde3766 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -152,6 +152,13 @@ config RESET_PISTACHIO
 	help
 	  This enables the reset driver for ImgTec Pistachio SoCs.
 
+config RESET_POLARFIRE_SOC
+	bool "Microchip PolarFire SoC (MPFS) Reset Driver"
+	depends on AUXILIARY_BUS && MCHP_CLK_MPFS
+	default MCHP_CLK_MPFS
+	help
+	  This driver supports peripheral reset for the Microchip PolarFire SoC
+
 config RESET_QCOM_AOSS
 	tristate "Qcom AOSS Reset Driver"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index cd5cf8e7c6a7..3e7e5fd633a8 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
 obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
 obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_RESET_POLARFIRE_SOC) += reset-mpfs.o
 obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
 obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
 obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
@@ -40,4 +41,3 @@ obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
 obj-$(CONFIG_ARCH_ZYNQMP) += reset-zynqmp.o
-
diff --git a/drivers/reset/reset-mpfs.c b/drivers/reset/reset-mpfs.c
new file mode 100644
index 000000000000..e003e50590ec
--- /dev/null
+++ b/drivers/reset/reset-mpfs.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PolarFire SoC (MPFS) Peripheral Clock Reset Controller
+ *
+ * Author: Conor Dooley <conor.dooley@microchip.com>
+ * Copyright (c) 2022 Microchip Technology Inc. and its subsidiaries.
+ *
+ */
+#include <linux/auxiliary_bus.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <dt-bindings/clock/microchip,mpfs-clock.h>
+#include <soc/microchip/mpfs.h>
+
+/*
+ * The ENVM reset is the lowest bit in the register & I am using the CLK_FOO
+ * defines in the dt to make things easier to configure - so this is accounting
+ * for the offset of 3 there.
+ */
+#define MPFS_PERIPH_OFFSET	CLK_ENVM
+#define MPFS_NUM_RESETS		30u
+#define MPFS_SLEEP_MIN_US	100
+#define MPFS_SLEEP_MAX_US	200
+
+/* block concurrent access to the soft reset register */
+static DEFINE_SPINLOCK(mpfs_reset_lock);
+
+/*
+ * Peripheral clock resets
+ */
+
+static int mpfs_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&mpfs_reset_lock, flags);
+
+	reg = mpfs_reset_read(rcdev->dev);
+	reg |= BIT(id);
+	mpfs_reset_write(rcdev->dev, reg);
+
+	spin_unlock_irqrestore(&mpfs_reset_lock, flags);
+
+	return 0;
+}
+
+static int mpfs_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&mpfs_reset_lock, flags);
+
+	reg = mpfs_reset_read(rcdev->dev);
+	reg &= ~BIT(id);
+	mpfs_reset_write(rcdev->dev, reg);
+
+	spin_unlock_irqrestore(&mpfs_reset_lock, flags);
+
+	return 0;
+}
+
+static int mpfs_status(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	u32 reg = mpfs_reset_read(rcdev->dev);
+
+	/*
+	 * It is safe to return here as MPFS_NUM_RESETS makes sure the sign bit
+	 * is never hit.
+	 */
+	return (reg & BIT(id));
+}
+
+static int mpfs_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	mpfs_assert(rcdev, id);
+
+	usleep_range(MPFS_SLEEP_MIN_US, MPFS_SLEEP_MAX_US);
+
+	mpfs_deassert(rcdev, id);
+
+	return 0;
+}
+
+static const struct reset_control_ops mpfs_reset_ops = {
+	.reset = mpfs_reset,
+	.assert = mpfs_assert,
+	.deassert = mpfs_deassert,
+	.status = mpfs_status,
+};
+
+static int mpfs_reset_xlate(struct reset_controller_dev *rcdev,
+			    const struct of_phandle_args *reset_spec)
+{
+	unsigned int index = reset_spec->args[0];
+
+	/*
+	 * CLK_RESERVED does not map to a clock, but it does map to a reset,
+	 * so it has to be accounted for here. It is the reset for the fabric,
+	 * so if this reset gets called - do not reset it.
+	 */
+	if (index == CLK_RESERVED) {
+		dev_err(rcdev->dev, "Resetting the fabric is not supported\n");
+		return -EINVAL;
+	}
+
+	if (index < MPFS_PERIPH_OFFSET || index >= (MPFS_PERIPH_OFFSET + rcdev->nr_resets)) {
+		dev_err(rcdev->dev, "Invalid reset index %u\n", index);
+		return -EINVAL;
+	}
+
+	return index - MPFS_PERIPH_OFFSET;
+}
+
+static int mpfs_reset_probe(struct auxiliary_device *adev,
+			    const struct auxiliary_device_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct reset_controller_dev *rcdev;
+
+	rcdev = devm_kzalloc(dev, sizeof(*rcdev), GFP_KERNEL);
+	if (!rcdev)
+		return -ENOMEM;
+
+	rcdev->dev = dev;
+	rcdev->dev->parent = dev->parent;
+	rcdev->ops = &mpfs_reset_ops;
+	rcdev->of_node = dev->parent->of_node;
+	rcdev->of_reset_n_cells = 1;
+	rcdev->of_xlate = mpfs_reset_xlate;
+	rcdev->nr_resets = MPFS_NUM_RESETS;
+
+	return devm_reset_controller_register(dev, rcdev);
+}
+
+static const struct auxiliary_device_id mpfs_reset_ids[] = {
+	{
+		.name = "clk_mpfs.reset-mpfs",
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(auxiliary, mpfs_reset_ids);
+
+static struct auxiliary_driver mpfs_reset_driver = {
+	.probe		= mpfs_reset_probe,
+	.id_table	= mpfs_reset_ids,
+};
+
+module_auxiliary_driver(mpfs_reset_driver);
+
+MODULE_DESCRIPTION("Microchip PolarFire SoC Reset Driver");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(MCHP_CLK_MPFS);
-- 
2.36.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv