[PATCH] riscv: kprobe: Fixup misaligned load text

[PATCH] riscv: kprobe: Fixup misaligned load text

[guoren]

From: Guo Ren <guoren@linux.alibaba.com>

The current kprobe would cause a misaligned load for the probe point.
This patch fixup it with two half-word loads instead.

Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/
Reported-by: Bjorn Topel <bjorn.topel@gmail.com>
---
 arch/riscv/kernel/probes/kprobes.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
index 41c7481afde3..c1160629cef4 100644
--- a/arch/riscv/kernel/probes/kprobes.c
+++ b/arch/riscv/kernel/probes/kprobes.c
@@ -74,7 +74,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 		return -EILSEQ;
 
 	/* copy instruction */
-	p->opcode = *p->addr;
+	p->opcode = (kprobe_opcode_t)(*(u16 *)probe_addr);
+	if (GET_INSN_LENGTH(p->opcode) == 4)
+		p->opcode |= (kprobe_opcode_t)(*(u16 *)(probe_addr + 2)) << 16;
 
 	/* decode instruction */
 	switch (riscv_probe_decode_insn(p->addr, &p->ainsn.api)) {
-- 
2.36.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH] riscv: kprobe: Fixup misaligned load text

[Björn Töpel]

guoren@kernel.org writes:

> From: Guo Ren <guoren@linux.alibaba.com>
>
> The current kprobe would cause a misaligned load for the probe point.
> This patch fixup it with two half-word loads instead.
>
> Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
> Signed-off-by: Guo Ren <guoren@kernel.org>
> Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/
> Reported-by: Bjorn Topel <bjorn.topel@gmail.com>
> ---
>  arch/riscv/kernel/probes/kprobes.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
> index 41c7481afde3..c1160629cef4 100644
> --- a/arch/riscv/kernel/probes/kprobes.c
> +++ b/arch/riscv/kernel/probes/kprobes.c
> @@ -74,7 +74,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
>  		return -EILSEQ;
>  
>  	/* copy instruction */
> -	p->opcode = *p->addr;
> +	p->opcode = (kprobe_opcode_t)(*(u16 *)probe_addr);
> +	if (GET_INSN_LENGTH(p->opcode) == 4)
> +		p->opcode |= (kprobe_opcode_t)(*(u16 *)(probe_addr + 2))
>  	<< 16;

Ugh, those casts. :-( What about the memcpy variant you had in the other
thread?

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH] riscv: kprobe: Fixup misaligned load text

[Guo Ren]

On Wed, Feb 1, 2023 at 5:40 PM Björn Töpel <bjorn@kernel.org> wrote:
>
> guoren@kernel.org writes:
>
> > From: Guo Ren <guoren@linux.alibaba.com>
> >
> > The current kprobe would cause a misaligned load for the probe point.
> > This patch fixup it with two half-word loads instead.
> >
> > Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
> > Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
> > Signed-off-by: Guo Ren <guoren@kernel.org>
> > Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/
> > Reported-by: Bjorn Topel <bjorn.topel@gmail.com>
> > ---
> >  arch/riscv/kernel/probes/kprobes.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
> > index 41c7481afde3..c1160629cef4 100644
> > --- a/arch/riscv/kernel/probes/kprobes.c
> > +++ b/arch/riscv/kernel/probes/kprobes.c
> > @@ -74,7 +74,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
> >               return -EILSEQ;
> >
> >       /* copy instruction */
> > -     p->opcode = *p->addr;
> > +     p->opcode = (kprobe_opcode_t)(*(u16 *)probe_addr);
> > +     if (GET_INSN_LENGTH(p->opcode) == 4)
> > +             p->opcode |= (kprobe_opcode_t)(*(u16 *)(probe_addr + 2))
> >       << 16;
>
> Ugh, those casts. :-( What about the memcpy variant you had in the other
> thread?
The memcpy version would force load probe_addr + 2. This one would
save an lh operation. The code text guarantees half-word alignment. No
misaligned load happened. Second, kprobe wouldn't write the last half
of 32b instruction.

-- 
Best Regards
 Guo Ren

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH] riscv: kprobe: Fixup misaligned load text

[Björn Töpel]

Guo Ren <guoren@kernel.org> writes:

> On Wed, Feb 1, 2023 at 5:40 PM Björn Töpel <bjorn@kernel.org> wrote:
>>
>> guoren@kernel.org writes:
>>
>> > From: Guo Ren <guoren@linux.alibaba.com>
>> >
>> > The current kprobe would cause a misaligned load for the probe point.
>> > This patch fixup it with two half-word loads instead.
>> >
>> > Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
>> > Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
>> > Signed-off-by: Guo Ren <guoren@kernel.org>
>> > Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/
>> > Reported-by: Bjorn Topel <bjorn.topel@gmail.com>
>> > ---
>> >  arch/riscv/kernel/probes/kprobes.c | 4 +++-
>> >  1 file changed, 3 insertions(+), 1 deletion(-)
>> >
>> > diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
>> > index 41c7481afde3..c1160629cef4 100644
>> > --- a/arch/riscv/kernel/probes/kprobes.c
>> > +++ b/arch/riscv/kernel/probes/kprobes.c
>> > @@ -74,7 +74,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
>> >               return -EILSEQ;
>> >
>> >       /* copy instruction */
>> > -     p->opcode = *p->addr;
>> > +     p->opcode = (kprobe_opcode_t)(*(u16 *)probe_addr);
>> > +     if (GET_INSN_LENGTH(p->opcode) == 4)
>> > +             p->opcode |= (kprobe_opcode_t)(*(u16 *)(probe_addr + 2))
>> >       << 16;
>>
>> Ugh, those casts. :-( What about the memcpy variant you had in the other
>> thread?
> The memcpy version would force load probe_addr + 2. This one would
> save an lh operation. The code text guarantees half-word alignment. No
> misaligned load happened. Second, kprobe wouldn't write the last half
> of 32b instruction.

Ok, something more readable, like:

diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
index f21592d20306..3602352ba175 100644
--- a/arch/riscv/kernel/probes/kprobes.c
+++ b/arch/riscv/kernel/probes/kprobes.c
@@ -50,14 +50,16 @@ static void __kprobes arch_simulate_insn(struct kprobe *p, struct pt_regs *regs)
 
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
-	unsigned long probe_addr = (unsigned long)p->addr;
+	u16 *insn = (u16 *)p->addr;
 
-	if (probe_addr & 0x1)
+	if ((uintptr_t)insn & 0x1)
 		return -EILSEQ;
 
 	/* copy instruction */
-	p->opcode = *p->addr;
-
+	p->opcode = *insn++;
+	if (GET_INSN_LENGTH(p->opcode) == 4)
+		p->opcode |= *insn << 16;
+	
 	/* decode instruction */
 	switch (riscv_probe_decode_insn(p->addr, &p->ainsn.api)) {
 	case INSN_REJECTED:	/* insn not supported */


Björn

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH] riscv: kprobe: Fixup misaligned load text

[Jessica Clarke]

On 2 Feb 2023, at 09:48, Björn Töpel <bjorn@kernel.org> wrote:
> 
> Guo Ren <guoren@kernel.org> writes:
> 
>> On Wed, Feb 1, 2023 at 5:40 PM Björn Töpel <bjorn@kernel.org> wrote:
>>> 
>>> guoren@kernel.org writes:
>>> 
>>>> From: Guo Ren <guoren@linux.alibaba.com>
>>>> 
>>>> The current kprobe would cause a misaligned load for the probe point.
>>>> This patch fixup it with two half-word loads instead.
>>>> 
>>>> Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
>>>> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
>>>> Signed-off-by: Guo Ren <guoren@kernel.org>
>>>> Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/
>>>> Reported-by: Bjorn Topel <bjorn.topel@gmail.com>
>>>> ---
>>>> arch/riscv/kernel/probes/kprobes.c | 4 +++-
>>>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>>> 
>>>> diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
>>>> index 41c7481afde3..c1160629cef4 100644
>>>> --- a/arch/riscv/kernel/probes/kprobes.c
>>>> +++ b/arch/riscv/kernel/probes/kprobes.c
>>>> @@ -74,7 +74,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
>>>>              return -EILSEQ;
>>>> 
>>>>      /* copy instruction */
>>>> -     p->opcode = *p->addr;
>>>> +     p->opcode = (kprobe_opcode_t)(*(u16 *)probe_addr);
>>>> +     if (GET_INSN_LENGTH(p->opcode) == 4)
>>>> +             p->opcode |= (kprobe_opcode_t)(*(u16 *)(probe_addr + 2))
>>>>      << 16;
>>> 
>>> Ugh, those casts. :-( What about the memcpy variant you had in the other
>>> thread?
>> The memcpy version would force load probe_addr + 2. This one would
>> save an lh operation. The code text guarantees half-word alignment. No
>> misaligned load happened. Second, kprobe wouldn't write the last half
>> of 32b instruction.
> 
> Ok, something more readable, like:
> 
> diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
> index f21592d20306..3602352ba175 100644
> --- a/arch/riscv/kernel/probes/kprobes.c
> +++ b/arch/riscv/kernel/probes/kprobes.c
> @@ -50,14 +50,16 @@ static void __kprobes arch_simulate_insn(struct kprobe *p, struct pt_regs *regs)
> 
> int __kprobes arch_prepare_kprobe(struct kprobe *p)
> {
> -	unsigned long probe_addr = (unsigned long)p->addr;
> +	u16 *insn = (u16 *)p->addr;
> 
> -	if (probe_addr & 0x1)
> +	if ((uintptr_t)insn & 0x1)
> 		return -EILSEQ;
> 
> 	/* copy instruction */
> -	p->opcode = *p->addr;
> -
> +	p->opcode = *insn++;
> +	if (GET_INSN_LENGTH(p->opcode) == 4)
> +		p->opcode |= *insn << 16;

*insn gets promoted to int not unsigned so this is UB if bit 15 is set.

Jess

> +	
> 	/* decode instruction */
> 	switch (riscv_probe_decode_insn(p->addr, &p->ainsn.api)) {
> 	case INSN_REJECTED:	/* insn not supported */
> 
> 
> Björn
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH] riscv: kprobe: Fixup misaligned load text

[Björn Töpel]

Jessica Clarke <jrtc27@jrtc27.com> writes:

>> +	p->opcode = *insn++;
>> +	if (GET_INSN_LENGTH(p->opcode) == 4)
>> +		p->opcode |= *insn << 16;
>
> *insn gets promoted to int not unsigned so this is UB if bit 15 is set.

Ugh. Good catch! I guess we can't get rid of *that* explicit cast to
kprobe_opcode_t here...

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH] riscv: kprobe: Fixup misaligned load text

[Guo Ren]

On Thu, Feb 2, 2023 at 10:36 PM Björn Töpel <bjorn@kernel.org> wrote:
>
> Jessica Clarke <jrtc27@jrtc27.com> writes:
>
> >> +    p->opcode = *insn++;
> >> +    if (GET_INSN_LENGTH(p->opcode) == 4)
> >> +            p->opcode |= *insn << 16;
> >
> > *insn gets promoted to int not unsigned so this is UB if bit 15 is set.
>
> Ugh. Good catch! I guess we can't get rid of *that* explicit cast to
> kprobe_opcode_t here...
Hi Bjorn & Jessica,
Thx for reviewing.

The new version came out:
https://lore.kernel.org/linux-riscv/20230204063531.740220-1-guoren@kernel.org/





--
Best Regards
 Guo Ren

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv