From: Samin Guo <samin.guo@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <netdev@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Richard Cochran <richardcochran@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Peter Geis <pgwipeout@gmail.com>,
Yanhong Wang <yanhong.wang@starfivetech.com>,
Samin Guo <samin.guo@starfivetech.com>
Subject: [PATCH v5 05/12] riscv: dts: starfive: jh7110: Add ethernet device nodes
Date: Fri, 3 Mar 2023 16:59:21 +0800 [thread overview]
Message-ID: <20230303085928.4535-6-samin.guo@starfivetech.com> (raw)
In-Reply-To: <20230303085928.4535-1-samin.guo@starfivetech.com>
Add JH7110 ethernet device node to support gmac driver for the JH7110
RISC-V SoC.
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 91 ++++++++++++++++++++++++
1 file changed, 91 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 09806418ed1b..2ce28292b721 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -233,6 +233,13 @@
#clock-cells = <0>;
};
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,lpi_en;
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <4>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+
tdm_ext: tdm-ext-clock {
compatible = "fixed-clock";
clock-output-names = "tdm_ext";
@@ -518,5 +525,89 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ gmac0: ethernet@16030000 {
+ compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+ reg = <0x0 0x16030000 0x0 0x10000>;
+ clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>,
+ <&aoncrg JH7110_AONCLK_GMAC0_AHB>,
+ <&syscrg JH7110_SYSCLK_GMAC0_PTP>,
+ <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>,
+ <&syscrg JH7110_SYSCLK_GMAC0_GTXC>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "gtx";
+ resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>,
+ <&aoncrg JH7110_AONRST_GMAC0_AHB>;
+ reset-names = "stmmaceth", "ahb";
+ interrupts = <7>, <6>, <5>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ phy-mode = "rgmii-id";
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <8>;
+ rx-fifo-depth = <2048>;
+ tx-fifo-depth = <2048>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,tso;
+ snps,en-tx-lpi-clockgating;
+ snps,txpbl = <16>;
+ snps,rxpbl = <16>;
+ status = "disabled";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+
+ gmac1: ethernet@16040000 {
+ compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+ reg = <0x0 0x16040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>,
+ <&syscrg JH7110_SYSCLK_GMAC1_AHB>,
+ <&syscrg JH7110_SYSCLK_GMAC1_PTP>,
+ <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>,
+ <&syscrg JH7110_SYSCLK_GMAC1_GTXC>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "gtx";
+ resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>,
+ <&syscrg JH7110_SYSRST_GMAC1_AHB>;
+ reset-names = "stmmaceth", "ahb";
+ interrupts = <78>, <77>, <76>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ phy-mode = "rgmii-id";
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <8>;
+ rx-fifo-depth = <2048>;
+ tx-fifo-depth = <2048>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,tso;
+ snps,en-tx-lpi-clockgating;
+ snps,txpbl = <16>;
+ snps,rxpbl = <16>;
+ status = "disabled";
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy1: ethernet-phy@1 {
+ reg = <0>;
+ };
+ };
+ };
};
};
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2023-03-03 9:00 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-03 8:59 [PATCH v5 00/12] Add Ethernet driver for StarFive JH7110 SoC Samin Guo
2023-03-03 8:59 ` [PATCH v5 01/12] dt-bindings: net: snps,dwmac: Add dwmac-5.20 version Samin Guo
2023-03-03 8:59 ` [PATCH v5 02/12] net: stmmac: platform: Add snps,dwmac-5.20 IP compatible string Samin Guo
2023-03-03 8:59 ` [PATCH v5 03/12] dt-bindings: net: snps,dwmac: Add an optional resets single 'ahb' Samin Guo
2023-03-08 21:57 ` Rob Herring
2023-03-09 3:10 ` Guo Samin
2023-03-03 8:59 ` [PATCH v5 04/12] dt-bindings: net: Add support StarFive dwmac Samin Guo
2023-03-08 21:59 ` Rob Herring
2023-03-09 1:26 ` Guo Samin
2023-03-03 8:59 ` Samin Guo [this message]
2023-03-03 13:45 ` [PATCH v5 05/12] riscv: dts: starfive: jh7110: Add ethernet device nodes Andrew Lunn
2023-03-06 2:19 ` Guo Samin
2023-03-04 22:57 ` Emil Renner Berthing
2023-03-07 7:50 ` Guo Samin
2023-03-03 8:59 ` [PATCH v5 06/12] net: stmmac: Add glue layer for StarFive JH7110 SoC Samin Guo
2023-03-03 16:18 ` Emil Renner Berthing
2023-03-06 7:15 ` Guo Samin
2023-03-06 12:21 ` Emil Renner Berthing
2023-03-07 7:57 ` Guo Samin
2023-03-10 0:02 ` Emil Renner Berthing
2023-03-10 0:39 ` Emil Renner Berthing
2023-03-10 1:55 ` Guo Samin
2023-03-10 9:03 ` Emil Renner Berthing
2023-03-10 11:13 ` Guo Samin
2023-03-03 8:59 ` [PATCH v5 07/12] dt-bindings: net: starfive,jh7110-dwmac: Add starfive,syscon Samin Guo
2023-03-08 22:03 ` Rob Herring
2023-03-09 1:16 ` Guo Samin
2023-03-03 8:59 ` [PATCH v5 08/12] net: stmmac: starfive_dmac: Add phy interface settings Samin Guo
2023-03-03 13:36 ` Andrew Lunn
2023-03-03 16:50 ` Emil Renner Berthing
2023-03-06 3:06 ` Guo Samin
2023-03-06 12:49 ` Emil Renner Berthing
2023-03-06 13:06 ` Andrew Lunn
2023-03-07 1:50 ` Guo Samin
2023-03-07 2:16 ` Guo Samin
2023-03-03 8:59 ` [PATCH v5 09/12] riscv: dts: starfive: jh7110: Add syscon to support " Samin Guo
2023-03-03 8:59 ` [PATCH v5 10/12] riscv: dts: starfive: visionfive-2-v1.3b: Add gmac+phy's delay configuration Samin Guo
2023-03-03 8:59 ` [PATCH v5 11/12] riscv: dts: starfive: visionfive-2-v1.2a: " Samin Guo
2023-03-06 13:00 ` Emil Renner Berthing
2023-03-07 1:43 ` Guo Samin
2023-03-07 12:40 ` Emil Renner Berthing
2023-03-08 3:01 ` Guo Samin
2023-03-03 8:59 ` [PATCH v5 12/12] riscv: dts: starfive: visionfive 2: Enable gmac device tree node Samin Guo
2023-03-06 13:04 ` Emil Renner Berthing
2023-03-07 1:21 ` Guo Samin
2023-03-07 12:23 ` Emil Renner Berthing
2023-03-10 8:09 ` [PATCH v5 00/12] Add Ethernet driver for StarFive JH7110 SoC Tommaso Merciai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230303085928.4535-6-samin.guo@starfivetech.com \
--to=samin.guo@starfivetech.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pgwipeout@gmail.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=yanhong.wang@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox