[PATCH v4 7/7] riscv: dts: starfive: add USB dts configuration for JH7110

[Minda Chen <minda.chen@starfivetech.com>]

Add USB wrapper layer and Cadence USB3 controller dts
configuration for StarFive JH7110 SoC and VisionFive2
Board.
USB controller connect to PHY, The PHY dts configuration
are also added.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         |  7 +++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 44 +++++++++++++++++++
 2 files changed, 51 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..cf0a66faf5d3 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -221,3 +221,10 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&usb0 {
+	phys = <&usbphy0>;
+	phy-names = "usb2-phy";
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 29cd798b6732..2f67196ffac0 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -366,6 +366,50 @@
 			status = "disabled";
 		};
 
+		usb0: usb@10100000 {
+			compatible = "starfive,jh7110-usb";
+			reg = <0x0 0x10100000 0x0 0x10000>,
+			      <0x0 0x10110000 0x0 0x10000>,
+			      <0x0 0x10120000 0x0 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <100>, <108>, <110>;
+			interrupt-names = "host", "peripheral", "otg";
+			clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>,
+				 <&stgcrg JH7110_STGCLK_USB0_STB>,
+				 <&stgcrg JH7110_STGCLK_USB0_APB>,
+				 <&stgcrg JH7110_STGCLK_USB0_AXI>,
+				 <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>;
+			clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+			resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>,
+				 <&stgcrg JH7110_STGRST_USB0_APB>,
+				 <&stgcrg JH7110_STGRST_USB0_AXI>,
+				 <&stgcrg JH7110_STGRST_USB0_UTMI_APB>;
+			reset-names = "pwrup","apb","axi","utmi";
+			starfive,stg-syscon = <&stg_syscon 0x4>;
+			status = "disabled";
+		};
+
+		usbphy0: phy@10200000 {
+			compatible = "starfive,jh7110-usb-phy";
+			reg = <0x0 0x10200000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
+				 <&stgcrg JH7110_STGCLK_USB0_APP_125>;
+			clock-names = "125m", "app_125";
+			#phy-cells = <0>;
+		};
+
+		pciephy0: phy@10210000 {
+			compatible = "starfive,jh7110-pcie-phy";
+			reg = <0x0 0x10210000 0x0 0x10000>;
+			#phy-cells = <0>;
+		};
+
+		pciephy1: phy@10220000 {
+			compatible = "starfive,jh7110-pcie-phy";
+			reg = <0x0 0x10220000 0x0 0x10000>;
+			#phy-cells = <0>;
+		};
+
 		stgcrg: clock-controller@10230000 {
 			compatible = "starfive,jh7110-stgcrg";
 			reg = <0x0 0x10230000 0x0 0x10000>;
-- 
2.17.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv