public inbox for linux-riscv@lists.infradead.org
 help / color / mirror / Atom feed
From: Evan Green <evan@rivosinc.com>
To: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Evan Green <evan@rivosinc.com>, Albert Ou <aou@eecs.berkeley.edu>,
	Andrew Jones <ajones@ventanamicro.com>,
	Conor Dooley <conor.dooley@microchip.com>,
	Heiko Stuebner <heiko.stuebner@vrull.eu>,
	Jisheng Zhang <jszhang@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org
Subject: [PATCH 2/3] RISC-V: Track ISA extensions per hart
Date: Fri, 28 Apr 2023 12:06:07 -0700	[thread overview]
Message-ID: <20230428190609.3239486-3-evan@rivosinc.com> (raw)
In-Reply-To: <20230428190609.3239486-1-evan@rivosinc.com>

The kernel maintains a mask of ISA extensions ANDed together across all
harts. Let's also keep a bitmap of ISA extensions for each CPU. Although
the kernel is currently unlikely to enable a feature that exists only on
some CPUs, we want the ability to report asymmetric CPU extensions
accurately to usermode.

Note that riscv_fill_hwcaps() runs before the per_cpu_offsets are built,
which is why I've used a [NR_CPUS] array rather than per_cpu() data.

Signed-off-by: Evan Green <evan@rivosinc.com>
---

 arch/riscv/include/asm/cpufeature.h | 10 ++++++++++
 arch/riscv/kernel/cpufeature.c      | 18 ++++++++++++------
 2 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/include/asm/cpufeature.h b/arch/riscv/include/asm/cpufeature.h
index 808d5403f2ac..23fed53b8815 100644
--- a/arch/riscv/include/asm/cpufeature.h
+++ b/arch/riscv/include/asm/cpufeature.h
@@ -6,6 +6,9 @@
 #ifndef _ASM_CPUFEATURE_H
 #define _ASM_CPUFEATURE_H
 
+#include <linux/bitmap.h>
+#include <asm/hwcap.h>
+
 /*
  * These are probed via a device_initcall(), via either the SBI or directly
  * from the corresponding CSRs.
@@ -16,8 +19,15 @@ struct riscv_cpuinfo {
 	unsigned long mimpid;
 };
 
+struct riscv_isainfo {
+	DECLARE_BITMAP(isa, RISCV_ISA_EXT_MAX);
+};
+
 DECLARE_PER_CPU(struct riscv_cpuinfo, riscv_cpuinfo);
 
 DECLARE_PER_CPU(long, misaligned_access_speed);
 
+/* Per-cpu ISA extensions. */
+extern struct riscv_isainfo hart_isa[NR_CPUS];
+
 #endif
diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
index 1a80474e308e..0e9d66580478 100644
--- a/arch/riscv/kernel/cpufeature.c
+++ b/arch/riscv/kernel/cpufeature.c
@@ -14,6 +14,7 @@
 #include <linux/of.h>
 #include <asm/alternative.h>
 #include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
 #include <asm/hwcap.h>
 #include <asm/patch.h>
 #include <asm/processor.h>
@@ -25,6 +26,9 @@ unsigned long elf_hwcap __read_mostly;
 /* Host ISA bitmap */
 static DECLARE_BITMAP(riscv_isa, RISCV_ISA_EXT_MAX) __read_mostly;
 
+/* Per-cpu ISA extensions. */
+struct riscv_isainfo hart_isa[NR_CPUS];
+
 /* Performance information */
 DEFINE_PER_CPU(long, misaligned_access_speed);
 
@@ -112,14 +116,17 @@ void __init riscv_fill_hwcap(void)
 	bitmap_zero(riscv_isa, RISCV_ISA_EXT_MAX);
 
 	for_each_of_cpu_node(node) {
+		struct riscv_isainfo *isainfo;
 		unsigned long this_hwcap = 0;
-		DECLARE_BITMAP(this_isa, RISCV_ISA_EXT_MAX);
 		const char *temp;
+		unsigned int cpu_id;
 
 		rc = riscv_of_processor_hartid(node, &hartid);
 		if (rc < 0)
 			continue;
 
+		cpu_id = riscv_hartid_to_cpuid(hartid);
+		isainfo = &hart_isa[cpu_id];
 		if (of_property_read_string(node, "riscv,isa", &isa)) {
 			pr_warn("Unable to find \"riscv,isa\" devicetree entry\n");
 			continue;
@@ -136,7 +143,6 @@ void __init riscv_fill_hwcap(void)
 		/* The riscv,isa DT property must start with rv64 or rv32 */
 		if (temp == isa)
 			continue;
-		bitmap_zero(this_isa, RISCV_ISA_EXT_MAX);
 		for (; *isa; ++isa) {
 			const char *ext = isa++;
 			const char *ext_end = isa;
@@ -214,7 +220,7 @@ void __init riscv_fill_hwcap(void)
 				if ((ext_end - ext == sizeof(name) - 1) &&	\
 				     !memcmp(ext, name, sizeof(name) - 1) &&	\
 				     riscv_isa_extension_check(bit))		\
-					set_bit(bit, this_isa);			\
+					set_bit(bit, isainfo->isa);		\
 			} while (false)						\
 
 			if (unlikely(ext_err))
@@ -224,7 +230,7 @@ void __init riscv_fill_hwcap(void)
 
 				if (riscv_isa_extension_check(nr)) {
 					this_hwcap |= isa2hwcap[nr];
-					set_bit(nr, this_isa);
+					set_bit(nr, isainfo->isa);
 				}
 			} else {
 				/* sorted alphabetically */
@@ -253,9 +259,9 @@ void __init riscv_fill_hwcap(void)
 			elf_hwcap = this_hwcap;
 
 		if (bitmap_empty(riscv_isa, RISCV_ISA_EXT_MAX))
-			bitmap_copy(riscv_isa, this_isa, RISCV_ISA_EXT_MAX);
+			bitmap_copy(riscv_isa, isainfo->isa, RISCV_ISA_EXT_MAX);
 		else
-			bitmap_and(riscv_isa, riscv_isa, this_isa, RISCV_ISA_EXT_MAX);
+			bitmap_and(riscv_isa, riscv_isa, isainfo->isa, RISCV_ISA_EXT_MAX);
 	}
 
 	/* We don't support systems with F but without D, so mask those out
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2023-04-28 19:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-28 19:06 [PATCH 0/3] RISC-V: Export Zba, Zbb to usermode via hwprobe Evan Green
2023-04-28 19:06 ` [PATCH 1/3] RISC-V: Add Zba extension probing Evan Green
2023-04-29 13:41   ` Conor Dooley
2023-04-29 20:07   ` Palmer Dabbelt
2023-04-28 19:06 ` Evan Green [this message]
2023-04-29 13:36   ` [PATCH 2/3] RISC-V: Track ISA extensions per hart Conor Dooley
2023-04-29 20:07   ` Palmer Dabbelt
2023-04-28 19:06 ` [PATCH 3/3] RISC-V: hwprobe: Expose Zba and Zbb Evan Green
2023-04-29 13:40   ` Conor Dooley
2023-04-29 20:07     ` Palmer Dabbelt
2023-05-01 15:33       ` Evan Green
2023-04-29 12:34 ` [PATCH 0/3] RISC-V: Export Zba, Zbb to usermode via hwprobe Andrew Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230428190609.3239486-3-evan@rivosinc.com \
    --to=evan@rivosinc.com \
    --cc=ajones@ventanamicro.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor.dooley@microchip.com \
    --cc=heiko.stuebner@vrull.eu \
    --cc=jszhang@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=palmer@rivosinc.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox