[PATCH v2 0/3] Add D1/T113s thermal sensor controller support

[PATCH v2 0/3] Add D1/T113s thermal sensor controller support

[Maksim Kiselev]

This series adds support for Allwinner D1/T113s thermal sensor controller.
THIS controller is similar to the one on H6, but with only one sensor and
uses a different scale and offset values.

v2:
- Fixed SoB tag
- Moved binding patch before driver changes

v1:
- Initial version

Maxim Kiselev (3):
  dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
  thermal: sun8i: Add D1/T113s THS controller support
  riscv: dts: allwinner: d1: Add thermal sensor and thermal zone

 .../thermal/allwinner,sun8i-a83t-ths.yaml     | 20 +++++++++++++-
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 26 +++++++++++++++++++
 drivers/thermal/sun8i_thermal.c               | 13 ++++++++++
 3 files changed, 58 insertions(+), 1 deletion(-)

-- 
2.39.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v2 1/3] dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller

[Maksim Kiselev]

From: Maxim Kiselev <bigunclemax@gmail.com>

Add a binding for D1/T113s thermal sensor controller.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
---
 .../thermal/allwinner,sun8i-a83t-ths.yaml     | 20 ++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index fbd4212285e2..001faa37fc27 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -16,6 +16,7 @@ properties:
       - allwinner,sun8i-a83t-ths
       - allwinner,sun8i-h3-ths
       - allwinner,sun8i-r40-ths
+      - allwinner,sun20i-d1-ths
       - allwinner,sun50i-a64-ths
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
@@ -61,6 +62,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
 
@@ -84,7 +86,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-h3-ths
+            enum:
+              - allwinner,sun8i-h3-ths
+              - allwinner,sun20i-d1-ths
 
     then:
       properties:
@@ -103,6 +107,7 @@ allOf:
             enum:
               - allwinner,sun8i-h3-ths
               - allwinner,sun8i-r40-ths
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a64-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h5-ths
@@ -159,4 +164,17 @@ examples:
          #thermal-sensor-cells = <1>;
     };
 
+  - |
+    thermal-sensor@2009400 {
+          compatible = "allwinner,sun20i-d1-ths";
+          reg = <0x02009400 0x400>;
+          interrupts = <0 90 0>;
+          clocks = <&ccu 0>;
+          clock-names = "bus";
+          resets = <&ccu 2>;
+          nvmem-cells = <&ths_calibration>;
+          nvmem-cell-names = "calibration";
+          #thermal-sensor-cells = <0>;
+    };
+
 ...
-- 
2.39.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v2 2/3] thermal: sun8i: Add D1/T113s THS controller support

[Maksim Kiselev]

From: Maxim Kiselev <bigunclemax@gmail.com>

This patch adds a thermal sensor controller support for the D1/T113s,
which is similar to the one on H6, but with only one sensor and
different scale and offset values.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
---
 drivers/thermal/sun8i_thermal.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 793ddce72132..01cc4e130892 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -628,6 +628,18 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
 	.calc_temp = sun8i_ths_calc_temp,
 };
 
+static const struct ths_thermal_chip sun20i_d1_ths = {
+	.sensor_num = 1,
+	.has_bus_clk_reset = true,
+	.offset = 188552,
+	.scale = 673,
+	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+	.calibrate = sun50i_h6_ths_calibrate,
+	.init = sun50i_h6_thermal_init,
+	.irq_ack = sun50i_h6_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
 static const struct of_device_id of_ths_match[] = {
 	{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
 	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
@@ -636,6 +648,7 @@ static const struct of_device_id of_ths_match[] = {
 	{ .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
 	{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
 	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
+	{ .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, of_ths_match);
-- 
2.39.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v2 3/3] riscv: dts: allwinner: d1: Add thermal sensor and thermal zone

[Maksim Kiselev]

From: Maxim Kiselev <bigunclemax@gmail.com>

This patch adds a thermal sensor controller node for the D1/T113s.
Also it adds a THS calibration data cell and thermal zone.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
---
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 922e8e0e2c09..b893f3325554 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun20i-d1-ccu.h>
 #include <dt-bindings/reset/sun20i-d1-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	#address-cells = <1>;
@@ -138,6 +139,19 @@ ccu: clock-controller@2001000 {
 			#reset-cells = <1>;
 		};
 
+		ths: thermal-sensor@2009400 {
+			compatible = "allwinner,sun20i-d1-ths";
+			reg = <0x02009400 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			status = "disabled";
+			#thermal-sensor-cells = <0>;
+		};
+
 		dmic: dmic@2031000 {
 			compatible = "allwinner,sun20i-d1-dmic",
 				     "allwinner,sun50i-h6-dmic";
@@ -365,6 +379,10 @@ sid: efuse@3006000 {
 			reg = <0x3006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x4>;
+			};
 		};
 
 		crypto: crypto@3040000 {
@@ -843,4 +861,12 @@ rtc: rtc@7090000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+	};
 };
-- 
2.39.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 1/3] dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller

[Krzysztof Kozlowski]

On 10/06/2023 22:35, Maksim Kiselev wrote:
> From: Maxim Kiselev <bigunclemax@gmail.com>
> 
> Add a binding for D1/T113s thermal sensor controller.
> 
> Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>

You are the same person, so use only one SoB.



Best regards,
Krzysztof


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 0/3] Add D1/T113s thermal sensor controller support

[Jernej Škrabec]

Dne sobota, 10. junij 2023 ob 22:35:41 CEST je Maksim Kiselev napisal(a):
> This series adds support for Allwinner D1/T113s thermal sensor controller.
> THIS controller is similar to the one on H6, but with only one sensor and
> uses a different scale and offset values.
> 
> v2:
> - Fixed SoB tag

It doesn't seems you fixed that.

Best regards,
Jernej

> - Moved binding patch before driver changes
> 
> v1:
> - Initial version
> 
> Maxim Kiselev (3):
>   dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
>   thermal: sun8i: Add D1/T113s THS controller support
>   riscv: dts: allwinner: d1: Add thermal sensor and thermal zone
> 
>  .../thermal/allwinner,sun8i-a83t-ths.yaml     | 20 +++++++++++++-
>  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 26 +++++++++++++++++++
>  drivers/thermal/sun8i_thermal.c               | 13 ++++++++++
>  3 files changed, 58 insertions(+), 1 deletion(-)
> 
> 





_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 0/3] Add D1/T113s thermal sensor controller support

[Jernej Škrabec]

Dne ponedeljek, 12. junij 2023 ob 20:22:43 CEST je Jernej Škrabec napisal(a):
> Dne sobota, 10. junij 2023 ob 22:35:41 CEST je Maksim Kiselev napisal(a):
> > This series adds support for Allwinner D1/T113s thermal sensor controller.
> > THIS controller is similar to the one on H6, but with only one sensor and
> > uses a different scale and offset values.
> > 
> > v2:
> > - Fixed SoB tag
> 
> It doesn't seems you fixed that.

Sorry, too many revisions in short time. Wait until discussion is finished.

Best regards,
Jernej
> 
> > - Moved binding patch before driver changes
> > 
> > v1:
> > - Initial version
> > 
> > Maxim Kiselev (3):
> >   dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
> >   thermal: sun8i: Add D1/T113s THS controller support
> >   riscv: dts: allwinner: d1: Add thermal sensor and thermal zone
> > 
> >  .../thermal/allwinner,sun8i-a83t-ths.yaml     | 20 +++++++++++++-
> >  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 26 +++++++++++++++++++
> >  drivers/thermal/sun8i_thermal.c               | 13 ++++++++++
> >  3 files changed, 58 insertions(+), 1 deletion(-)
> > 
> > 
> 
> 
> 
> 
> 





_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v2 0/3] Add D1/T113s thermal sensor controller support

[Maxim Kiselev]

пн, 12 июн. 2023 г. в 21:22, Jernej Škrabec <jernej.skrabec@gmail.com>:
>
> Dne sobota, 10. junij 2023 ob 22:35:41 CEST je Maksim Kiselev napisal(a):
> > This series adds support for Allwinner D1/T113s thermal sensor controller.
> > THIS controller is similar to the one on H6, but with only one sensor and
> > uses a different scale and offset values.
> >
> > v2:
> > - Fixed SoB tag
>
> It doesn't seems you fixed that.

Sorry for that. I accidentally sent the wrong version of patches . And
immediately after that I sent v3.

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv