[PATCH 4/5] riscv: dts: sophgo: add initial CV1800B SoC device tree

Inochi Amaoto
2023-09-30T22:35:02Z

Hi, Jisheng

You add the clint dt-bindings of CV1800B clint, but I don't see the clint
node in this dt. The SBI needs this clint node to provide timer for linux.
AFAIK, the dt of SBI comes from the linux or the bootloader, and bootloader
may load the linux dt and pass it to the SBI. I think it is better to add
the clint node.

In addition, please separate the peripheral node to a different file, which
can be reused by both the CV1800 series and CV1810 series.

Thanks,
Inochi

>
>Add initial device tree for the CV1800B RISC-V SoC by SOPHGO.
>
>Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
>---
> arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 117 ++++++++++++++++++++++++
> 1 file changed, 117 insertions(+)
> create mode 100644 arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>
>diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>new file mode 100644
>index 000000000000..8829bebaa017
>--- /dev/null
>+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>@@ -0,0 +1,117 @@
>+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>+/*
>+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
>+ */
>+
>+#include <dt-bindings/interrupt-controller/irq.h>
>+
>+/ {
>+ compatible = "sophgo,cv1800b";
>+ #address-cells = <1>;
>+ #size-cells = <1>;
>+
>+ cpus: cpus {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ timebase-frequency = <25000000>;
>+
>+ cpu0: cpu@0 {
>+ compatible = "thead,c906", "riscv";
>+ device_type = "cpu";
>+ reg = <0>;
>+ d-cache-block-size = <64>;
>+ d-cache-sets = <512>;
>+ d-cache-size = <65536>;
>+ i-cache-block-size = <64>;
>+ i-cache-sets = <128>;
>+ i-cache-size = <32768>;
>+ mmu-type = "riscv,sv39";
>+ riscv,isa = "rv64imafdc";
>+ riscv,isa-base = "rv64i";
>+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
>+ "zifencei", "zihpm";
>+
>+ cpu0_intc: interrupt-controller {
>+ compatible = "riscv,cpu-intc";
>+ interrupt-controller;
>+ #address-cells = <0>;
>+ #interrupt-cells = <1>;
>+ };
>+ };
>+ };
>+
>+ osc: oscillator {
>+ compatible = "fixed-clock";
>+ clock-output-names = "osc_25m";
>+ #clock-cells = <0>;
>+ };
>+
>+ soc {
>+ compatible = "simple-bus";
>+ interrupt-parent = <&plic>;
>+ #address-cells = <1>;
>+ #size-cells = <1>;
>+ dma-noncoherent;
>+ ranges;
>+
>+ uart0: serial@04140000 {
>+ compatible = "snps,dw-apb-uart";
>+ reg = <0x04140000 0x100>;
>+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
>+ clocks = <&osc>;
>+ reg-shift = <2>;
>+ reg-io-width = <4>;
>+ status = "disabled";
>+ };
>+
>+ uart1: serial@04150000 {
>+ compatible = "snps,dw-apb-uart";
>+ reg = <0x04150000 0x100>;
>+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
>+ clocks = <&osc>;
>+ reg-shift = <2>;
>+ reg-io-width = <4>;
>+ status = "disabled";
>+ };
>+
>+ uart2: serial@04160000 {
>+ compatible = "snps,dw-apb-uart";
>+ reg = <0x04160000 0x100>;
>+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
>+ clocks = <&osc>;
>+ reg-shift = <2>;
>+ reg-io-width = <4>;
>+ status = "disabled";
>+ };
>+
>+ uart3: serial@04170000 {
>+ compatible = "snps,dw-apb-uart";
>+ reg = <0x04170000 0x100>;
>+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
>+ clocks = <&osc>;
>+ reg-shift = <2>;
>+ reg-io-width = <4>;
>+ status = "disabled";
>+ };
>+
>+ uart4: serial@041c0000 {
>+ compatible = "snps,dw-apb-uart";
>+ reg = <0x041c0000 0x100>;
>+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
>+ clocks = <&osc>;
>+ reg-shift = <2>;
>+ reg-io-width = <4>;
>+ status = "disabled";
>+ };
>+
>+ plic: interrupt-controller@70000000 {
>+ compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
>+ reg = <0x70000000 0x4000000>;
>+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
>+ interrupt-controller;
>+ #address-cells = <0>;
>+ #interrupt-cells = <2>;
>+ riscv,ndev = <101>;
>+ };
>+ };
>+};
>--
>2.40.1