[PATCH 2/2] membarrier: riscv: Provide core serializing command

[Andrea Parri <parri.andrea@gmail.com>]

RISC-V uses xRET instructions on return from interrupt and to go back
to user-space; the xRET instruction is not core serializing.

Use FENCE.I for providing core serialization as follows:

 - by calling sync_core_before_usermode() on return from interrupt (cf.
   ipi_sync_core()),

 - via switch_mm() and sync_core_before_usermode() (respectively, for
   uthread->uthread and kthread->uthread transitions) to go back to
   user-space.

On RISC-V, the serialization in switch_mm() is activated by resetting
the icache_stale_mask of the mm at prepare_sync_core_cmd().

Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Suggested-by: Palmer Dabbelt <palmer@dabbelt.com>
---
 .../membarrier-sync-core/arch-support.txt     |  2 +-
 arch/riscv/Kconfig                            |  3 ++
 arch/riscv/include/asm/sync_core.h            | 29 +++++++++++++++++++
 3 files changed, 33 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/include/asm/sync_core.h

diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
index d96b778b87ed8..f6f0bd871a578 100644
--- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt
+++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
@@ -43,7 +43,7 @@
     |    openrisc: | TODO |
     |      parisc: | TODO |
     |     powerpc: |  ok  |
-    |       riscv: | TODO |
+    |       riscv: |  ok  |
     |        s390: |  ok  |
     |          sh: | TODO |
     |       sparc: | TODO |
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 95a2a06acc6a6..3e2734a3f2957 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -27,14 +27,17 @@ config RISCV
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
+	select ARCH_HAS_MEMBARRIER_SYNC_CORE
 	select ARCH_HAS_MMIOWB
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PMEM_API
+	select ARCH_HAS_PREPARE_SYNC_CORE_CMD
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SET_DIRECT_MAP if MMU
 	select ARCH_HAS_SET_MEMORY if MMU
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU && !XIP_KERNEL
+	select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
 	select ARCH_HAS_SYSCALL_WRAPPER
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
diff --git a/arch/riscv/include/asm/sync_core.h b/arch/riscv/include/asm/sync_core.h
new file mode 100644
index 0000000000000..9153016da8f14
--- /dev/null
+++ b/arch/riscv/include/asm/sync_core.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_SYNC_CORE_H
+#define _ASM_RISCV_SYNC_CORE_H
+
+/*
+ * RISC-V implements return to user-space through an xRET instruction,
+ * which is not core serializing.
+ */
+static inline void sync_core_before_usermode(void)
+{
+	asm volatile ("fence.i" ::: "memory");
+}
+
+#ifdef CONFIG_SMP
+/*
+ * Ensure the next switch_mm() on every CPU issues a core serializing
+ * instruction for the given @mm.
+ */
+static inline void prepare_sync_core_cmd(struct mm_struct *mm)
+{
+	cpumask_setall(&mm->context.icache_stale_mask);
+}
+#else
+static inline void prepare_sync_core_cmd(struct mm_struct *mm)
+{
+}
+#endif /* CONFIG_SMP */
+
+#endif /* _ASM_RISCV_SYNC_CORE_H */
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv