Re: [PATCH RFC v3 01/21] ACPI: Only enumerate enabled (or functional) devices

[Jonathan Cameron <Jonathan.Cameron@Huawei.com>]

On Thu, 11 Jan 2024 10:26:15 +0000
"Russell King (Oracle)" <linux@armlinux.org.uk> wrote:

> On Thu, Jan 11, 2024 at 10:19:49AM +0000, Jonathan Cameron wrote:
> > On Tue, 2 Jan 2024 14:39:25 +0000
> > Jonathan Cameron <Jonathan.Cameron@Huawei.com> wrote:
> >   
> > > On Fri, 15 Dec 2023 20:47:31 +0100
> > > "Rafael J. Wysocki" <rjw@rjwysocki.net> wrote:
> > >   
> > > > On Friday, December 15, 2023 5:15:39 PM CET Jonathan Cameron wrote:    
> > > > > On Fri, 15 Dec 2023 15:31:55 +0000
> > > > > "Russell King (Oracle)" <linux@armlinux.org.uk> wrote:
> > > > >       
> > > > > > On Thu, Dec 14, 2023 at 07:37:10PM +0100, Rafael J. Wysocki wrote:      
> > > > > > > On Thu, Dec 14, 2023 at 7:16 PM Rafael J. Wysocki <rafael@kernel.org> wrote:        
> > > > > > > >
> > > > > > > > On Thu, Dec 14, 2023 at 7:10 PM Russell King (Oracle)
> > > > > > > > <linux@armlinux.org.uk> wrote:        
> > > > > > > > > I guess we need something like:
> > > > > > > > >
> > > > > > > > >         if (device->status.present)
> > > > > > > > >                 return device->device_type != ACPI_BUS_TYPE_PROCESSOR ||
> > > > > > > > >                        device->status.enabled;
> > > > > > > > >         else
> > > > > > > > >                 return device->status.functional;
> > > > > > > > >
> > > > > > > > > so we only check device->status.enabled for processor-type devices?        
> > > > > > > >
> > > > > > > > Yes, something like this.        
> > > > > > > 
> > > > > > > However, that is not sufficient, because there are
> > > > > > > ACPI_BUS_TYPE_DEVICE devices representing processors.
> > > > > > > 
> > > > > > > I'm not sure about a clean way to do it ATM.        
> > > > > > 
> > > > > > Ok, how about:
> > > > > > 
> > > > > > static bool acpi_dev_is_processor(const struct acpi_device *device)
> > > > > > {
> > > > > > 	struct acpi_hardware_id *hwid;
> > > > > > 
> > > > > > 	if (device->device_type == ACPI_BUS_TYPE_PROCESSOR)
> > > > > > 		return true;
> > > > > > 
> > > > > > 	if (device->device_type != ACPI_BUS_TYPE_DEVICE)
> > > > > > 		return false;
> > > > > > 
> > > > > > 	list_for_each_entry(hwid, &device->pnp.ids, list)
> > > > > > 		if (!strcmp(ACPI_PROCESSOR_OBJECT_HID, hwid->id) ||
> > > > > > 		    !strcmp(ACPI_PROCESSOR_DEVICE_HID, hwid->id))
> > > > > > 			return true;
> > > > > > 
> > > > > > 	return false;
> > > > > > }
> > > > > > 
> > > > > > and then:
> > > > > > 
> > > > > > 	if (device->status.present)
> > > > > > 		return !acpi_dev_is_processor(device) || device->status.enabled;
> > > > > > 	else
> > > > > > 		return device->status.functional;
> > > > > > 
> > > > > > ?
> > > > > >       
> > > > > Changing it to CPU only for now makes sense to me and I think this code snippet should do the
> > > > > job.  Nice and simple.      
> > > > 
> > > > Well, except that it does checks that are done elsewhere slightly
> > > > differently, which from the maintenance POV is not nice.
> > > > 
> > > > Maybe something like the appended patch (untested).    
> > > 
> > > Hi Rafael,
> > > 
> > > As far as I can see that's functionally equivalent, so looks good to me.
> > > I'm not set up to test this today though, so will defer to Russell on whether
> > > there is anything missing
> > > 
> > > Thanks for putting this together.  
> > 
> > This is rather embarrassing...
> > 
> > I span this up on a QEMU instance with some prints to find out we need
> > the !acpi_device_is_processor() restriction.
> > On my 'random' test setup it fails on one device. ACPI0017 - which I
> > happen to know rather well. It's the weird pseudo device that lets
> > a CXL aware OS know there is a CEDT table to probe.
> > 
> > Whilst I really don't like that hack (it is all about making software
> > distribution of out of tree modules easier rather than something
> > fundamental), I'm the CXL QEMU maintainer :(
> > 
> > Will fix that, but it shows there is at least one broken firmware out
> > there.
> > 
> > On plus side, Rafael's code seems to work as expected and lets that
> > buggy firwmare carry on working :) So lets pretend the bug in qemu
> > is a deliberate test case!  
> 
> Lol, thanks for a test case and showing that Rafael's approach is
> indeed necessary.
> 
> Would your test quality for a tested-by for this? For reference, this
> is my current version below with Rafael's update:

Sure. This matches what I have.

Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>


> 
> 8<====
> From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Subject: [PATCH] ACPI: Only enumerate enabled (or functional) processor
>  devices
> 
> From: James Morse <james.morse@arm.com>
> 
> Today the ACPI enumeration code 'visits' all devices that are present.
> 
> This is a problem for arm64, where CPUs are always present, but not
> always enabled. When a device-check occurs because the firmware-policy
> has changed and a CPU is now enabled, the following error occurs:
> | acpi ACPI0007:48: Enumeration failure
> 
> This is ultimately because acpi_dev_ready_for_enumeration() returns
> true for a device that is not enabled. The ACPI Processor driver
> will not register such CPUs as they are not 'decoding their resources'.
> 
> ACPI allows a device to be functional instead of maintaining the
> present and enabled bit, but we can't simply check the enabled bit
> for all devices since firmware can be buggy.
> 
> If ACPI indicates that the device is present and enabled, then all well
> and good, we can enumate it. However, if the device is present and not
> enabled, then we also check whether the device is a processor device
> to limit the impact of this new check to just processor devices.
> 
> This avoids enumerating present && functional processor devices that
> are not enabled.
> 
> Signed-off-by: James Morse <james.morse@arm.com>
> Co-developed-by: Rafael J. Wysocki <rjw@rjwysocki.net>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
> Changes since RFC v2:
>  * Incorporate comment suggestion by Gavin Shan.
> Changes since RFC v3:
>  * Fixed "sert" typo.
> Changes since RFC v3 (smaller series):
>  * Restrict checking the enabled bit to processor devices, update
>    commit comments.
>  * Use Rafael's suggestion in
>    https://lore.kernel.org/r/5760569.DvuYhMxLoT@kreacher
> ---
>  drivers/acpi/acpi_processor.c | 11 ++++++++
>  drivers/acpi/device_pm.c      |  2 +-
>  drivers/acpi/device_sysfs.c   |  2 +-
>  drivers/acpi/internal.h       |  4 ++-
>  drivers/acpi/property.c       |  2 +-
>  drivers/acpi/scan.c           | 49 ++++++++++++++++++++++++++++-------
>  6 files changed, 56 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index 4fe2ef54088c..cf7c1cca69dd 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -626,6 +626,17 @@ static struct acpi_scan_handler processor_handler = {
>  	},
>  };
>  
> +bool acpi_device_is_processor(const struct acpi_device *adev)
> +{
> +	if (adev->device_type == ACPI_BUS_TYPE_PROCESSOR)
> +		return true;
> +
> +	if (adev->device_type != ACPI_BUS_TYPE_DEVICE)
> +		return false;
> +
> +	return acpi_scan_check_handler(adev, &processor_handler);
> +}
> +
>  static int acpi_processor_container_attach(struct acpi_device *dev,
>  					   const struct acpi_device_id *id)
>  {
> diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
> index 3b4d048c4941..e3c80f3b3b57 100644
> --- a/drivers/acpi/device_pm.c
> +++ b/drivers/acpi/device_pm.c
> @@ -313,7 +313,7 @@ int acpi_bus_init_power(struct acpi_device *device)
>  		return -EINVAL;
>  
>  	device->power.state = ACPI_STATE_UNKNOWN;
> -	if (!acpi_device_is_present(device)) {
> +	if (!acpi_dev_ready_for_enumeration(device)) {
>  		device->flags.initialized = false;
>  		return -ENXIO;
>  	}
> diff --git a/drivers/acpi/device_sysfs.c b/drivers/acpi/device_sysfs.c
> index 23373faa35ec..a0256d2493a7 100644
> --- a/drivers/acpi/device_sysfs.c
> +++ b/drivers/acpi/device_sysfs.c
> @@ -141,7 +141,7 @@ static int create_pnp_modalias(const struct acpi_device *acpi_dev, char *modalia
>  	struct acpi_hardware_id *id;
>  
>  	/* Avoid unnecessarily loading modules for non present devices. */
> -	if (!acpi_device_is_present(acpi_dev))
> +	if (!acpi_dev_ready_for_enumeration(acpi_dev))
>  		return 0;
>  
>  	/*
> diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
> index 866c7c4ed233..9388d4c8674a 100644
> --- a/drivers/acpi/internal.h
> +++ b/drivers/acpi/internal.h
> @@ -62,6 +62,8 @@ void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug,
>  int acpi_scan_add_handler_with_hotplug(struct acpi_scan_handler *handler,
>  				       const char *hotplug_profile_name);
>  void acpi_scan_hotplug_enabled(struct acpi_hotplug_profile *hotplug, bool val);
> +bool acpi_scan_check_handler(const struct acpi_device *adev,
> +			     struct acpi_scan_handler *handler);
>  
>  #ifdef CONFIG_DEBUG_FS
>  extern struct dentry *acpi_debugfs_dir;
> @@ -107,7 +109,6 @@ int acpi_device_setup_files(struct acpi_device *dev);
>  void acpi_device_remove_files(struct acpi_device *dev);
>  void acpi_device_add_finalize(struct acpi_device *device);
>  void acpi_free_pnp_ids(struct acpi_device_pnp *pnp);
> -bool acpi_device_is_present(const struct acpi_device *adev);
>  bool acpi_device_is_battery(struct acpi_device *adev);
>  bool acpi_device_is_first_physical_node(struct acpi_device *adev,
>  					const struct device *dev);
> @@ -119,6 +120,7 @@ int acpi_bus_register_early_device(int type);
>  const struct acpi_device *acpi_companion_match(const struct device *dev);
>  int __acpi_device_uevent_modalias(const struct acpi_device *adev,
>  				  struct kobj_uevent_env *env);
> +bool acpi_device_is_processor(const struct acpi_device *adev);
>  
>  /* --------------------------------------------------------------------------
>                                    Power Resource
> diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
> index 6979a3f9f90a..14d6948fd88a 100644
> --- a/drivers/acpi/property.c
> +++ b/drivers/acpi/property.c
> @@ -1420,7 +1420,7 @@ static bool acpi_fwnode_device_is_available(const struct fwnode_handle *fwnode)
>  	if (!is_acpi_device_node(fwnode))
>  		return false;
>  
> -	return acpi_device_is_present(to_acpi_device_node(fwnode));
> +	return acpi_dev_ready_for_enumeration(to_acpi_device_node(fwnode));
>  }
>  
>  static const void *
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 02bb2cce423f..f94d1f744bcc 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -304,7 +304,7 @@ static int acpi_scan_device_check(struct acpi_device *adev)
>  	int error;
>  
>  	acpi_bus_get_status(adev);
> -	if (acpi_device_is_present(adev)) {
> +	if (acpi_dev_ready_for_enumeration(adev)) {
>  		/*
>  		 * This function is only called for device objects for which
>  		 * matching scan handlers exist.  The only situation in which
> @@ -338,7 +338,7 @@ static int acpi_scan_bus_check(struct acpi_device *adev, void *not_used)
>  	int error;
>  
>  	acpi_bus_get_status(adev);
> -	if (!acpi_device_is_present(adev)) {
> +	if (!acpi_dev_ready_for_enumeration(adev)) {
>  		acpi_scan_device_not_enumerated(adev);
>  		return 0;
>  	}
> @@ -1913,11 +1913,6 @@ static bool acpi_device_should_be_hidden(acpi_handle handle)
>  	return true;
>  }
>  
> -bool acpi_device_is_present(const struct acpi_device *adev)
> -{
> -	return adev->status.present || adev->status.functional;
> -}
> -
>  static bool acpi_scan_handler_matching(struct acpi_scan_handler *handler,
>  				       const char *idstr,
>  				       const struct acpi_device_id **matchid)
> @@ -1938,6 +1933,18 @@ static bool acpi_scan_handler_matching(struct acpi_scan_handler *handler,
>  	return false;
>  }
>  
> +bool acpi_scan_check_handler(const struct acpi_device *adev,
> +			     struct acpi_scan_handler *handler)
> +{
> +	struct acpi_hardware_id *hwid;
> +
> +	list_for_each_entry(hwid, &adev->pnp.ids, list)
> +		if (acpi_scan_handler_matching(handler, hwid->id, NULL))
> +			return true;
> +
> +	return false;
> +}
> +
>  static struct acpi_scan_handler *acpi_scan_match_handler(const char *idstr,
>  					const struct acpi_device_id **matchid)
>  {
> @@ -2381,16 +2388,38 @@ EXPORT_SYMBOL_GPL(acpi_dev_clear_dependencies);
>   * acpi_dev_ready_for_enumeration - Check if the ACPI device is ready for enumeration
>   * @device: Pointer to the &struct acpi_device to check
>   *
> - * Check if the device is present and has no unmet dependencies.
> + * Check if the device is functional or enabled and has no unmet dependencies.
>   *
> - * Return true if the device is ready for enumeratino. Otherwise, return false.
> + * Return true if the device is ready for enumeration. Otherwise, return false.
>   */
>  bool acpi_dev_ready_for_enumeration(const struct acpi_device *device)
>  {
>  	if (device->flags.honor_deps && device->dep_unmet)
>  		return false;
>  
> -	return acpi_device_is_present(device);
> +	/*
> +	 * ACPI 6.5's 6.3.7 "_STA (Device Status)" allows firmware to return
> +	 * (!present && functional) for certain types of devices that should be
> +	 * enumerated. Note that the enabled bit should not be set unless the
> +	 * present bit is set.
> +	 *
> +	 * However, limit this only to processor devices to reduce possible
> +	 * regressions with firmware.
> +	 */
> +	if (device->status.functional)
> +		return true;
> +
> +	if (!device->status.present)
> +		return false;
> +
> +	/*
> +	 * Fast path - if enabled is set, avoid the more expensive test to
> +	 * check whether this device is a processor.
> +	 */
> +	if (device->status.enabled)
> +		return true;
> +
> +	return !acpi_device_is_processor(device);
>  }
>  EXPORT_SYMBOL_GPL(acpi_dev_ready_for_enumeration);
>  


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv