Linux-RISC-V Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Jones <ajones@ventanamicro.com>
To: Samuel Holland <samuel.holland@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>,
	linux-kernel@vger.kernel.org,  Conor Dooley <conor@kernel.org>,
	linux-riscv@lists.infradead.org,
	 Stefan O'Rear <sorear@fastmail.com>,
	stable@vger.kernel.org
Subject: Re: [PATCH -fixes v3 2/2] riscv: Save/restore envcfg CSR during CPU suspend
Date: Wed, 14 Feb 2024 10:29:11 +0100	[thread overview]
Message-ID: <20240214-cd40380c3969dc9450f05848@orel> (raw)
In-Reply-To: <20240214090206.195754-3-samuel.holland@sifive.com>

On Wed, Feb 14, 2024 at 01:01:57AM -0800, Samuel Holland wrote:
> The value of the [ms]envcfg CSR is lost when entering a nonretentive
> idle state, so the CSR must be rewritten when resuming the CPU.
> 
> The [ms]envcfg CSR was added in version 1.12 of the privileged ISA, and
> is used by extensions other than Zicboz. However, the kernel currenly
> has no way to determine the privileged ISA version. Since Zicboz is the
> only in-kernel user of this CSR so far, use it as a proxy for
> determining if the CSR is implemented.
> 
> Cc: <stable@vger.kernel.org> # v6.7+
> Fixes: 43c16d51a19b ("RISC-V: Enable cbo.zero in usermode")
> Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
> ---
> 
> Changes in v3:
>  - Check for Zicboz instead of the privileged ISA version
> 
> Changes in v2:
>  - Check for privileged ISA v1.12 instead of the specific CSR
>  - Use riscv_has_extension_likely() instead of new ALTERNATIVE()s
> 
>  arch/riscv/include/asm/suspend.h | 1 +
>  arch/riscv/kernel/suspend.c      | 4 ++++
>  2 files changed, 5 insertions(+)
> 
> diff --git a/arch/riscv/include/asm/suspend.h b/arch/riscv/include/asm/suspend.h
> index 02f87867389a..491296a335d0 100644
> --- a/arch/riscv/include/asm/suspend.h
> +++ b/arch/riscv/include/asm/suspend.h
> @@ -14,6 +14,7 @@ struct suspend_context {
>  	struct pt_regs regs;
>  	/* Saved and restored by high-level functions */
>  	unsigned long scratch;
> +	unsigned long envcfg;
>  	unsigned long tvec;
>  	unsigned long ie;
>  #ifdef CONFIG_MMU
> diff --git a/arch/riscv/kernel/suspend.c b/arch/riscv/kernel/suspend.c
> index 239509367e42..28166006688e 100644
> --- a/arch/riscv/kernel/suspend.c
> +++ b/arch/riscv/kernel/suspend.c
> @@ -15,6 +15,8 @@
>  void suspend_save_csrs(struct suspend_context *context)
>  {
>  	context->scratch = csr_read(CSR_SCRATCH);
> +	if (riscv_cpu_has_extension_unlikely(smp_processor_id(), RISCV_ISA_EXT_ZICBOZ))
> +		context->envcfg = csr_read(CSR_ENVCFG);
>  	context->tvec = csr_read(CSR_TVEC);
>  	context->ie = csr_read(CSR_IE);
>  
> @@ -36,6 +38,8 @@ void suspend_save_csrs(struct suspend_context *context)
>  void suspend_restore_csrs(struct suspend_context *context)
>  {
>  	csr_write(CSR_SCRATCH, context->scratch);
> +	if (riscv_cpu_has_extension_unlikely(smp_processor_id(), RISCV_ISA_EXT_ZICBOZ))
> +		csr_write(CSR_ENVCFG, context->envcfg);
>  	csr_write(CSR_TVEC, context->tvec);
>  	csr_write(CSR_IE, context->ie);
>  
> -- 
> 2.43.0
>


Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

      reply	other threads:[~2024-02-14  9:29 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-14  9:01 [PATCH -fixes v3 0/2] riscv: cbo.zero fixes Samuel Holland
2024-02-14  9:01 ` [PATCH -fixes v3 1/2] riscv: Fix enabling cbo.zero when running in M-mode Samuel Holland
2024-02-14  9:28   ` Andrew Jones
2024-02-27 19:48     ` Alexandre Ghiti
2024-02-27 20:01       ` Samuel Holland
2024-02-14  9:01 ` [PATCH -fixes v3 2/2] riscv: Save/restore envcfg CSR during CPU suspend Samuel Holland
2024-02-14  9:29   ` Andrew Jones [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240214-cd40380c3969dc9450f05848@orel \
    --to=ajones@ventanamicro.com \
    --cc=conor@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=samuel.holland@sifive.com \
    --cc=sorear@fastmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox