From: Joshua Yeong <joshua.yeong@starfivetech.com>
To: paul.walmsley@sifive.com, palmer@dabbelt.com,
aou@eecs.berkeley.edu, geert+renesas@glider.be,
joshua.yeong@starfivetech.com,
prabhakar.mahadev-lad.rj@bp.renesas.com,
conor.dooley@microchip.com, alexghiti@rivosinc.com,
evan@rivosinc.com, ajones@ventanamicro.com, heiko@sntech.de,
guoren@kernel.org, uwu@icenowy.me, jszhang@kernel.org,
conor@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
leyfoon.tan@starfivetech.com, jeeheng.sia@starfivetech.com
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH 3/4] cache: Add StarLink-500 cache management for StarFive JH8100 RISC-V core
Date: Thu, 14 Mar 2024 14:12:04 +0800 [thread overview]
Message-ID: <20240314061205.26143-4-joshua.yeong@starfivetech.com> (raw)
In-Reply-To: <20240314061205.26143-1-joshua.yeong@starfivetech.com>
Add software workaround for StarFive StarLink-500
on JH8100 SoC for CMO extension instructions.
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
---
drivers/cache/Kconfig | 9 ++
drivers/cache/Makefile | 1 +
drivers/cache/starlink500_cache.c | 137 ++++++++++++++++++++++++++++++
3 files changed, 147 insertions(+)
create mode 100644 drivers/cache/starlink500_cache.c
diff --git a/drivers/cache/Kconfig b/drivers/cache/Kconfig
index 9345ce4976d7..e215379f6a73 100644
--- a/drivers/cache/Kconfig
+++ b/drivers/cache/Kconfig
@@ -14,4 +14,13 @@ config SIFIVE_CCACHE
help
Support for the composable cache controller on SiFive platforms.
+config STARLINK_500_CACHE
+ bool "StarLink-500 Cache controller"
+ depends on RISCV_DMA_NONCOHERENT
+ depends on ERRATA_STARFIVE
+ select RISCV_NONSTANDARD_CACHE_OPS
+ default y
+ help
+ Support for the StarLink-500 cache controller on StarFive platforms.
+
endmenu
diff --git a/drivers/cache/Makefile b/drivers/cache/Makefile
index 7657cff3bd6c..c515eb5714ea 100644
--- a/drivers/cache/Makefile
+++ b/drivers/cache/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_AX45MP_L2_CACHE) += ax45mp_cache.o
obj-$(CONFIG_SIFIVE_CCACHE) += sifive_ccache.o
+obj-$(CONFIG_STARLINK_500_CACHE) += starlink500_cache.o
diff --git a/drivers/cache/starlink500_cache.c b/drivers/cache/starlink500_cache.c
new file mode 100644
index 000000000000..eaf8303cb086
--- /dev/null
+++ b/drivers/cache/starlink500_cache.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Non-coherent cache functions for StarFive's StarLink-500 cache controller
+ *
+ * Copyright (C) 2024 Shanghai StarFive Technology Co., Ltd.
+ *
+ * Author: Joshua Yeong <joshua.yeong@starfivetech.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/cacheflush.h>
+#include <linux/cacheinfo.h>
+#include <linux/delay.h>
+#include <linux/dma-direction.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/processor.h>
+
+#include <asm/dma-noncoherent.h>
+
+#define STARFIVE_SL500_CMO_FLUSH_START_ADDR 0x0
+#define STARFIVE_SL500_CMO_FLUSH_END_ADDR 0x8
+#define STARFIVE_SL500_CMO_FLUSH_CTL 0x10
+#define STARFIVE_SL500_CMO_CACHE_ALIGN 0x40
+
+#define STARFIVE_SL500_ADDRESS_RANGE_MASK GENMASK(39, 0)
+#define STARFIVE_SL500_FLUSH_CTL_MODE_MASK GENMASK(2, 1)
+#define STARFIVE_SL500_FLUSH_CTL_ENABLE_MASK BIT(0)
+
+#define STARFIVE_SL500_FLUSH_CTL_CLEAN_INVALIDATE 0
+#define STARFIVE_SL500_FLUSH_CTL_MAKE_INVALIDATE 1
+#define STARFIVE_SL500_FLUSH_CTL_CLEAN_SHARED 2
+
+struct starfive_sl500_cache_priv {
+ void __iomem *base_addr;
+};
+
+static struct starfive_sl500_cache_priv starfive_sl500_cache_priv;
+
+static void starfive_sl500_cmo_flush_complete(void)
+{
+ ktime_t timeout;
+
+ volatile void __iomem *_ctl = starfive_sl500_cache_priv.base_addr +
+ STARFIVE_SL500_CMO_FLUSH_CTL;
+ timeout = ktime_add_ms(ktime_get(), 5000);
+
+ do {
+ if(!(ioread64(_ctl) & STARFIVE_SL500_FLUSH_CTL_ENABLE_MASK))
+ return;
+ msleep(50);
+ } while (ktime_before(ktime_get(), timeout));
+
+ pr_err("StarFive CMO operation timeout\n");
+ dump_stack();
+}
+
+void starfive_sl500_dma_cache_wback(phys_addr_t paddr, unsigned long size)
+{
+ writeq(FIELD_PREP(STARFIVE_SL500_ADDRESS_RANGE_MASK, paddr),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_START_ADDR);
+ writeq(FIELD_PREP(STARFIVE_SL500_ADDRESS_RANGE_MASK, paddr + size),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_END_ADDR);
+
+ mb();
+ writeq(FIELD_PREP(STARFIVE_SL500_FLUSH_CTL_MODE_MASK,
+ STARFIVE_SL500_FLUSH_CTL_CLEAN_SHARED),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_CTL);
+
+ starfive_sl500_cmo_flush_complete();
+}
+
+void starfive_sl500_dma_cache_invalidate(phys_addr_t paddr, unsigned long size)
+{
+ writeq(FIELD_PREP(STARFIVE_SL500_ADDRESS_RANGE_MASK, paddr),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_START_ADDR);
+ writeq(FIELD_PREP(STARFIVE_SL500_ADDRESS_RANGE_MASK, paddr + size),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_END_ADDR);
+
+ mb();
+ writeq(FIELD_PREP(STARFIVE_SL500_FLUSH_CTL_MODE_MASK,
+ STARFIVE_SL500_FLUSH_CTL_MAKE_INVALIDATE),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_CTL);
+
+ starfive_sl500_cmo_flush_complete();
+}
+
+void starfive_sl500_dma_cache_wback_inv(phys_addr_t paddr, unsigned long size)
+{
+ writeq(FIELD_PREP(STARFIVE_SL500_ADDRESS_RANGE_MASK, paddr),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_START_ADDR);
+ writeq(FIELD_PREP(STARFIVE_SL500_ADDRESS_RANGE_MASK, paddr + size),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_END_ADDR);
+
+ mb();
+ writeq(FIELD_PREP(STARFIVE_SL500_FLUSH_CTL_MODE_MASK,
+ STARFIVE_SL500_FLUSH_CTL_CLEAN_INVALIDATE),
+ starfive_sl500_cache_priv.base_addr + STARFIVE_SL500_CMO_FLUSH_CTL);
+
+ starfive_sl500_cmo_flush_complete();
+}
+
+static const struct riscv_nonstd_cache_ops starfive_sl500_cmo_ops = {
+ .wback = &starfive_sl500_dma_cache_wback,
+ .inv = &starfive_sl500_dma_cache_invalidate,
+ .wback_inv = &starfive_sl500_dma_cache_wback_inv,
+};
+
+static const struct of_device_id starfive_sl500_cache_ids[] = {
+ { .compatible = "starfive,starlink-500-cache" },
+ { /* sentinel */ }
+};
+
+static int __init starfive_sl500_cache_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+ int ret;
+
+ np = of_find_matching_node(NULL, starfive_sl500_cache_ids);
+ if (!of_device_is_available(np))
+ return -ENODEV;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ return ret;
+
+ starfive_sl500_cache_priv.base_addr = ioremap(res.start, resource_size(&res));
+ if (!starfive_sl500_cache_priv.base_addr)
+ return -ENOMEM;
+
+ riscv_noncoherent_register_cache_ops(&starfive_sl500_cmo_ops);
+
+ return 0;
+}
+early_initcall(starfive_sl500_cache_init);
--
2.25.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2024-03-14 6:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-14 6:12 [PATCH 0/4] Add StarFive's StarLink-500 Cache Controller Joshua Yeong
2024-03-14 6:12 ` [PATCH 1/4] riscv: asm: vendorid_list: Add StarFive Technology to vendors list Joshua Yeong
2024-03-14 6:12 ` [PATCH 2/4] riscv: errata: Add StarFive alternative ports Joshua Yeong
2024-03-15 23:13 ` Samuel Holland
2024-03-17 15:04 ` Conor Dooley
2024-03-14 6:12 ` Joshua Yeong [this message]
2024-03-15 8:22 ` [PATCH 3/4] cache: Add StarLink-500 cache management for StarFive JH8100 RISC-V core kernel test robot
2024-03-15 23:33 ` Samuel Holland
2024-03-14 6:12 ` [PATCH 4/4] dt-bindings: cache: Add docs for StarFive StarLink-500 cache controller Joshua Yeong
2024-03-15 16:36 ` Rob Herring
2024-03-17 14:58 ` Conor Dooley
2024-03-17 15:01 ` [PATCH 0/4] Add StarFive's StarLink-500 Cache Controller Conor Dooley
2024-03-20 8:08 ` Conor Dooley
2024-03-22 6:16 ` Joshua Yeong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240314061205.26143-4-joshua.yeong@starfivetech.com \
--to=joshua.yeong@starfivetech.com \
--cc=ajones@ventanamicro.com \
--cc=alexghiti@rivosinc.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=evan@rivosinc.com \
--cc=geert+renesas@glider.be \
--cc=guoren@kernel.org \
--cc=heiko@sntech.de \
--cc=jeeheng.sia@starfivetech.com \
--cc=jszhang@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leyfoon.tan@starfivetech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=uwu@icenowy.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox