[PATCH v5 5/7] clk: spacemit: make clocks optional

[Alex Elder <elder@riscstar.com>]

There are some syscon devices that support both clocks and resets,
but for now only their reset functionality is required.  Make
defining clocks optional for a SpacemiT CCU, though at least one
clock or at least one reset controller must be defined.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
 drivers/clk/spacemit/ccu-k1.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index ad5f41695f8db..dfc8aa60d4345 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -1218,6 +1218,10 @@ static int spacemit_ccu_register(struct device *dev,
 	struct clk_hw_onecell_data *clk_data;
 	int i, ret;
 
+	/* Clocks are optional */
+	if (!data->clk_hws)
+		return 0;
+
 	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, data->clk_num),
 				GFP_KERNEL);
 	if (!clk_data)
@@ -1329,6 +1333,7 @@ static int k1_ccu_probe(struct platform_device *pdev)
 	return 0;
 }
 
+/* Match data is required; its clk_hws or reset_data field must be non-null */
 static const struct of_device_id of_k1_ccu_match[] = {
 	{
 		.compatible	= "spacemit,k1-pll",
-- 
2.45.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv