Linux-RISC-V Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Zong-You Xie <ben717@andestech.com>
Cc: <devicetree@vger.kernel.org>, <linux-riscv@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <paul.walmsley@sifive.com>,
	<palmer@dabbelt.com>, <aou@eecs.berkeley.edu>, <alex@ghiti.fr>,
	<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<tglx@linutronix.de>, <daniel.lezcano@linaro.org>,
	<prabhakar.mahadev-lad.rj@bp.renesas.com>, <tim609@andestech.com>,
	"Ben Zong-You Xie" <ben717@andestech.com>
Subject: [PATCH v2 0/9] add Voyager board support
Date: Sat, 3 May 2025 23:18:20 +0800	[thread overview]
Message-ID: <20250503151829.605006-1-ben717@andestech.com> (raw)

The Voyager is a 9.6” x 9.6” Micro ATX form factor development board
including Andes QiLai SoC. This patch series adds minimal device tree
files for the QiLai SoC and the Voyager board [1].

Now only support basic uart drivers to boot up into a basic console. Other
features will be added later.

[1] https://www.andestech.com/en/products-solutions/andeshape-platforms/qilai-chip/
---
Changelog:

v1->v2:
  - Add Rob's Reviewed-by tag to patch 2.
  - Add Rob's Acked-by tag to patch 3.
  - Add detailed descriptions to PLIC_SW and PLMT0.
  - Add Rob's Acked-by tag to patch 6.
  - Move the aliases node and memory node from qilai.dtsi to qilai-voyager.dts.
  - Drop "status = okay" in each CPU node since the status property is by
    default "okay".
  - Reorder the nodes in qilai.dtsi by unit address in ascending order.
  - Add myself as the maintainer of Andes's SoC tree.

v1: https://lore.kernel.org/all/20250407104937.315783-1-ben717@andestech.com/
---
Ben Zong-You Xie (9):
  riscv: add Andes SoC family Kconfig support
  dt-bindings: riscv: add Andes QiLai SoC and the Voyager board bindings
  dt-bindings: interrupt-controller: add Andes QiLai PLIC
  dt-bindings: interrupt-controller: add Andes machine-level software
    interrupt controller
  dt-bindings: timer: add Andes machine timer
  dt-bindings: cache: ax45mp-cache: allow variable cache-sets for Andes
    L2 cache
  riscv: dts: andes: add QiLai SoC device tree
  riscv: dts: andes: add Voyager board device tree
  riscv: defconfig: enable Andes SoC

 .../cache/andestech,ax45mp-cache.yaml         |   2 +-
 .../andestech,plicsw.yaml                     |  54 +++++
 .../sifive,plic-1.0.0.yaml                    |   1 +
 .../devicetree/bindings/riscv/andes.yaml      |  25 +++
 .../bindings/timer/andestech,plmt0.yaml       |  53 +++++
 MAINTAINERS                                   |   9 +
 arch/riscv/Kconfig.errata                     |   2 +-
 arch/riscv/Kconfig.socs                       |   9 +
 arch/riscv/boot/dts/Makefile                  |   1 +
 arch/riscv/boot/dts/andes/Makefile            |   2 +
 arch/riscv/boot/dts/andes/qilai-voyager.dts   |  28 +++
 arch/riscv/boot/dts/andes/qilai.dtsi          | 186 ++++++++++++++++++
 arch/riscv/configs/defconfig                  |   1 +
 13 files changed, 371 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml
 create mode 100644 Documentation/devicetree/bindings/riscv/andes.yaml
 create mode 100644 Documentation/devicetree/bindings/timer/andestech,plmt0.yaml
 create mode 100644 arch/riscv/boot/dts/andes/Makefile
 create mode 100644 arch/riscv/boot/dts/andes/qilai-voyager.dts
 create mode 100644 arch/riscv/boot/dts/andes/qilai.dtsi

--
2.34.1

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2025-05-03 15:19 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-03 15:18 Ben Zong-You Xie [this message]
2025-05-03 15:18 ` [PATCH v2 1/9] riscv: add Andes SoC family Kconfig support Ben Zong-You Xie
2025-05-03 15:18 ` [PATCH v2 2/9] dt-bindings: riscv: add Andes QiLai SoC and the Voyager board bindings Ben Zong-You Xie
2025-05-03 15:18 ` [PATCH v2 3/9] dt-bindings: interrupt-controller: add Andes QiLai PLIC Ben Zong-You Xie
2025-05-03 15:18 ` [PATCH v2 4/9] dt-bindings: interrupt-controller: add Andes machine-level software interrupt controller Ben Zong-You Xie
2025-05-06 16:24   ` Conor Dooley
2025-05-03 15:18 ` [PATCH v2 5/9] dt-bindings: timer: add Andes machine timer Ben Zong-You Xie
2025-05-06 16:27   ` Conor Dooley
2025-05-03 15:18 ` [PATCH v2 6/9] dt-bindings: cache: ax45mp-cache: allow variable cache-sets for Andes L2 cache Ben Zong-You Xie
2025-05-06 16:23   ` Conor Dooley
2025-05-09 14:57     ` Conor Dooley
2025-05-03 15:18 ` [PATCH v2 7/9] riscv: dts: andes: add QiLai SoC device tree Ben Zong-You Xie
2025-05-03 15:18 ` [PATCH v2 8/9] riscv: dts: andes: add Voyager board " Ben Zong-You Xie
2025-05-03 15:18 ` [PATCH v2 9/9] riscv: defconfig: enable Andes SoC Ben Zong-You Xie
2025-05-06 16:26   ` Conor Dooley
  -- strict thread matches above, loose matches on Subject: below --
2025-07-11 13:30 [PATCH v2 0/9] add Voyager board support Ben Zong-You Xie
2025-08-10 21:12 ` patchwork-bot+linux-riscv

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250503151829.605006-1-ben717@andestech.com \
    --to=ben717@andestech.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tim609@andestech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox