Linux-RISC-V Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Nylon Chen <nylon.chen@sifive.com>
To: "Conor Dooley" <conor@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Samuel Holland" <samuel.holland@sifive.com>,
	"Uwe Kleine-König" <ukleinek@kernel.org>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org,
	Nylon Chen <nylon.chen@sifive.com>,
	Conor Dooley <conor.dooley@microchip.com>,
	Vincent Chen <vincent.chen@sifive.com>
Subject: [PATCH v15 1/3] riscv: dts: sifive: unleashed/unmatched: Remove PWM controlled LED's active-low properties
Date: Thu, 29 May 2025 11:53:39 +0800	[thread overview]
Message-ID: <20250529035341.51736-2-nylon.chen@sifive.com> (raw)
In-Reply-To: <20250529035341.51736-1-nylon.chen@sifive.com>

This removes the active-low properties of the PWM-controlled LEDs in
the HiFive Unmatched device tree.

The reference is hifive-unleashed-a00.pdf[0] and hifive-unmatched-schematics-v3.pdf[1].

Link: https://sifive.cdn.prismic.io/sifive/c52a8e32-05ce-4aaf-95c8-7bf8453f8698_hifive-unleashed-a00-schematics-1.pdf [0]
Link: https://sifive.cdn.prismic.io/sifive/6a06d6c0-6e66-49b5-8e9e-e68ce76f4192_hifive-unmatched-schematics-v3.pdf [1]

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
---
 arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 12 ++++--------
 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 12 ++++--------
 2 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index 900a50526d77..06731b8c7bc3 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -49,32 +49,28 @@ led-controller {
 		compatible = "pwm-leds";
 
 		led-d1 {
-			pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
-			active-low;
+			pwms = <&pwm0 0 7812500 0>;
 			color = <LED_COLOR_ID_GREEN>;
 			max-brightness = <255>;
 			label = "d1";
 		};
 
 		led-d2 {
-			pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
-			active-low;
+			pwms = <&pwm0 1 7812500 0>;
 			color = <LED_COLOR_ID_GREEN>;
 			max-brightness = <255>;
 			label = "d2";
 		};
 
 		led-d3 {
-			pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
-			active-low;
+			pwms = <&pwm0 2 7812500 0>;
 			color = <LED_COLOR_ID_GREEN>;
 			max-brightness = <255>;
 			label = "d3";
 		};
 
 		led-d4 {
-			pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
-			active-low;
+			pwms = <&pwm0 3 7812500 0>;
 			color = <LED_COLOR_ID_GREEN>;
 			max-brightness = <255>;
 			label = "d4";
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 72b87b08ab44..03ce2cee4e97 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -51,8 +51,7 @@ led-controller-1 {
 		compatible = "pwm-leds";
 
 		led-d12 {
-			pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
-			active-low;
+			pwms = <&pwm0 0 7812500 0>;
 			color = <LED_COLOR_ID_GREEN>;
 			max-brightness = <255>;
 			label = "d12";
@@ -68,20 +67,17 @@ multi-led {
 			label = "d2";
 
 			led-red {
-				pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
-				active-low;
+				pwms = <&pwm0 2 7812500 0>;
 				color = <LED_COLOR_ID_RED>;
 			};
 
 			led-green {
-				pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
-				active-low;
+				pwms = <&pwm0 1 7812500 0>;
 				color = <LED_COLOR_ID_GREEN>;
 			};
 
 			led-blue {
-				pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
-				active-low;
+				pwms = <&pwm0 3 7812500 0>;
 				color = <LED_COLOR_ID_BLUE>;
 			};
 		};
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2025-05-29  3:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-29  3:53 [PATCH v15 0/5] Change PWM-controlled LED pin active mode and algorithm Nylon Chen
2025-05-29  3:53 ` Nylon Chen [this message]
2025-05-29  3:53 ` [PATCH v15 2/3] pwm: sifive: fix PWM algorithm and clarify inverted compare behavior Nylon Chen
2025-05-29  3:53 ` [PATCH v15 3/3] pwm: sifive: fix rounding and idempotency issues in apply and get_state Nylon Chen
2025-05-29 11:22 ` [PATCH v15 0/5] Change PWM-controlled LED pin active mode and algorithm Uwe Kleine-König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250529035341.51736-2-nylon.chen@sifive.com \
    --to=nylon.chen@sifive.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor.dooley@microchip.com \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh@kernel.org \
    --cc=samuel.holland@sifive.com \
    --cc=ukleinek@kernel.org \
    --cc=vincent.chen@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox