From: Alex Elder <elder@riscstar.com>
To: mturquette@baylibre.com, sboyd@kernel.org
Cc: dlan@gentoo.org, heylenay@4d2.org, inochiama@outlook.com,
elder@riscstar.com, linux-clk@vger.kernel.org,
spacemit@lists.linux.dev, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, Guodong Xu <guodong@riscstar.com>
Subject: [PATCH] clk: spacemit: mark K1 pll1_d8 as critical
Date: Mon, 9 Jun 2025 15:08:21 -0500 [thread overview]
Message-ID: <20250609200822.468482-1-elder@riscstar.com> (raw)
The pll1_d8 clock is enabled by the boot loader, and is ultimately a
parent for numerous clocks, including those used by APB and AXI buses.
Guodong Xu discovered that this clock got disabled while responding to
getting -EPROBE_DEFER when requesting a reset controller.
The needed clock (CLK_DMA, along with its parents) had already been
enabled. To respond to the probe deferral return, the CLK_DMA clock
was disabled, and this led to parent clocks also reducing their enable
count. When the enable count for pll1_d8 was decremented it became 0,
which caused it to be disabled. This led to a system hang.
Marking that clock critical resolves this by preventing it from being
disabled.
Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to
be supplied for a CCU_FACTOR_GATE clock.
Fixes: 1b72c59db0add ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Tested-by: Guodong Xu <guodong@riscstar.com>
---
v2: Reworded the description to provide better detail
drivers/clk/spacemit/ccu-k1.c | 3 ++-
drivers/clk/spacemit/ccu_mix.h | 21 +++++++++++++--------
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index cdde37a052353..df65009a07bb1 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -170,7 +170,8 @@ CCU_FACTOR_GATE_DEFINE(pll1_d4, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(3), 4,
CCU_FACTOR_GATE_DEFINE(pll1_d5, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(4), 5, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d6, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(5), 6, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d7, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(6), 7, 1);
-CCU_FACTOR_GATE_DEFINE(pll1_d8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(7), 8, 1);
+CCU_FACTOR_GATE_FLAGS_DEFINE(pll1_d8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(7), 8, 1,
+ CLK_IS_CRITICAL);
CCU_FACTOR_GATE_DEFINE(pll1_d11_223p4, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(15), 11, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d13_189, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(16), 13, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d23_106p8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(20), 23, 1);
diff --git a/drivers/clk/spacemit/ccu_mix.h b/drivers/clk/spacemit/ccu_mix.h
index 51d19f5d6aacb..668c8139339e1 100644
--- a/drivers/clk/spacemit/ccu_mix.h
+++ b/drivers/clk/spacemit/ccu_mix.h
@@ -101,16 +101,21 @@ static struct ccu_mix _name = { \
} \
}
+#define CCU_FACTOR_GATE_FLAGS_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
+ _mul, _flags) \
+struct ccu_mix _name = { \
+ .gate = CCU_GATE_INIT(_mask_gate), \
+ .factor = CCU_FACTOR_INIT(_div, _mul), \
+ .common = { \
+ .reg_ctrl = _reg_ctrl, \
+ CCU_MIX_INITHW(_name, _parent, spacemit_ccu_factor_gate_ops, _flags) \
+ } \
+}
+
#define CCU_FACTOR_GATE_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
_mul) \
-static struct ccu_mix _name = { \
- .gate = CCU_GATE_INIT(_mask_gate), \
- .factor = CCU_FACTOR_INIT(_div, _mul), \
- .common = { \
- .reg_ctrl = _reg_ctrl, \
- CCU_MIX_INITHW(_name, _parent, spacemit_ccu_factor_gate_ops, 0) \
- } \
-}
+ CCU_FACTOR_GATE_FLAGS_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
+ _mul, 0)
#define CCU_MUX_GATE_DEFINE(_name, _parents, _reg_ctrl, _shift, _width, \
_mask_gate, _flags) \
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
--
2.45.2
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2025-06-09 20:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-09 20:08 Alex Elder [this message]
2025-06-09 20:14 ` [PATCH] clk: spacemit: mark K1 pll1_d8 as critical Alex Elder
2025-06-10 2:24 ` Haylen Chu
-- strict thread matches above, loose matches on Subject: below --
2025-06-07 20:27 Alex Elder
2025-06-08 0:24 ` Yixun Lan
2025-06-08 2:46 ` Alex Elder
2025-06-08 4:46 ` Haylen Chu
2025-06-08 12:56 ` Yixun Lan
2025-06-08 18:31 ` Alex Elder
2025-06-09 4:21 ` Haylen Chu
2025-06-08 19:30 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250609200822.468482-1-elder@riscstar.com \
--to=elder@riscstar.com \
--cc=dlan@gentoo.org \
--cc=guodong@riscstar.com \
--cc=heylenay@4d2.org \
--cc=inochiama@outlook.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox