[PATCH net-next v2 00/18] Support the Cadence MACB/GEM instances on Mobileye EyeQ5 SoCs

["Théo Lebrun" <theo.lebrun@bootlin.com>]

Mobileye EyeQ5 SoCs provides two GEM IP blocks. The end result of this
series is working 1G networking on the EyeQ5 eval board. It isn't just
a new macb_config & compatible, we also provide some cleanup & fixes
along the way.

dt-bindings:
  [PATCH net-next v2 01/18] dt-bindings: net: cdns,macb: sort compatibles
  [PATCH net-next v2 02/18] dt-bindings: net: cdns,macb: add Mobileye EyeQ5 ethernet interface
  [PATCH net-next v2 03/18] dt-bindings: net: cdns,macb: allow tsu_clk without tx_clk
  [PATCH net-next v2 04/18] dt-bindings: net: cdns,macb: allow dma-coherent

Cleanup:
  [PATCH net-next v2 05/18] net: macb: use BIT() macro for capability definitions
  [PATCH net-next v2 06/18] net: macb: Remove local variables clk_init and init in macb_probe()
  [PATCH net-next v2 07/18] net: macb: drop macb_config NULL checking
  [PATCH net-next v2 08/18] net: macb: introduce DMA descriptor helpers (is 64bit? is PTP?)
  [PATCH net-next v2 09/18] net: macb: sort #includes

Fixes:
  [PATCH net-next v2 10/18] net: macb: remove illusion about TBQPH/RBQPH being per-queue
  [PATCH net-next v2 11/18] net: macb: single dma_alloc_coherent() for DMA descriptors
  [PATCH net-next v2 12/18] net: macb: match skb_reserve(skb, NET_IP_ALIGN) with HW alignment
  [PATCH net-next v2 13/18] net: macb: avoid double endianness swap in macb_set_hwaddr()

EyeQ5 support:
  [PATCH net-next v2 14/18] net: macb: add no LSO capability (MACB_CAPS_NO_LSO)
  [PATCH net-next v2 15/18] net: macb: Add "mobileye,eyeq5-gem" compatible

DTS:
  [PATCH net-next v2 16/18] MIPS: mobileye: add EyeQ5 DMA IOCU support
  [PATCH net-next v2 17/18] MIPS: mobileye: eyeq5: add two Cadence GEM Ethernet controllers
  [PATCH net-next v2 18/18] MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs

Note: I've categorised [PATCH 12/18] as a fix, but it is also mandatory
for working GEM on EyeQ5 SoCs. Hardware is RSC capable so we mustn't do
the skb_reserve(). It probably is the first platform where
NET_IP_ALIGN=2 and the devices are RSC capable.

Note: I did not extract the platform specific code (2 syscon registers
being written to) from macb_config->init into separate resources. I
cannot dissociate that register write sequence into something more
fluid (modeling clocks/PHYs).

Have a nice day,
Théo

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
Changes in v2:
- Rebase upon latest net-next (1ea2e106130a).
- dt-bindings:
  - Add description to mobileye,olb phandle, following a
    `make dt_binding_check` warning reported by Rob's bot.
  - Add "sort compatibles" patch.
  - Take "Acked-by: Rob Herring" on dma-coherent patch.
  - Improve "allow tsu_clk without tx_clk" commit message following
    Rob's comment.
- Take "Reviewed-by: Andrew Lunn" trailer on four patches:
    net: macb: use BIT() macro for capability definitions
    net: macb: add no LSO capability (MACB_CAPS_NO_LSO)
    net: macb: sort #includes
    MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs
- net: macb:
  - Split:
      simplify macb_probe() code touching match data
    into two commits, following comment by Andrew:
      Remove local variables clk_init and init in macb_probe()
      drop macb_config NULL checking
  - Replace match-data IP alignment value by a more robust solution: HW support
    IP alignment if it does not support RSC.
  - use regmap_update_bits() for OLB register writes.
  - fix insertion order of compatible.
  - fix LSO detection comment.
  - move local variables `struct macb_dma_desc_64` inside conditionals,
    in macb_{get,get}_addr().
  - add "remove illusion about TBQPH/RBQPH being per-queue" commit.
  - add "single dma_alloc_coherent() for DMA descriptors" commit.
  - add "avoid double endianness swap in macb_set_hwaddr()" commit.
- DTS: lowercase reg properties of PHYs.
- Link to v1: https://lore.kernel.org/r/20250321-macb-v1-0-537b7e37971d@bootlin.com

---
Théo Lebrun (18):
      dt-bindings: net: cdns,macb: sort compatibles
      dt-bindings: net: cdns,macb: add Mobileye EyeQ5 ethernet interface
      dt-bindings: net: cdns,macb: allow tsu_clk without tx_clk
      dt-bindings: net: cdns,macb: allow dma-coherent
      net: macb: use BIT() macro for capability definitions
      net: macb: Remove local variables clk_init and init in macb_probe()
      net: macb: drop macb_config NULL checking
      net: macb: introduce DMA descriptor helpers (is 64bit? is PTP?)
      net: macb: sort #includes
      net: macb: remove illusion about TBQPH/RBQPH being per-queue
      net: macb: single dma_alloc_coherent() for DMA descriptors
      net: macb: match skb_reserve(skb, NET_IP_ALIGN) with HW alignment
      net: macb: avoid double endianness swap in macb_set_hwaddr()
      net: macb: add no LSO capability (MACB_CAPS_NO_LSO)
      net: macb: Add "mobileye,eyeq5-gem" compatible
      MIPS: mobileye: add EyeQ5 DMA IOCU support
      MIPS: mobileye: eyeq5: add two Cadence GEM Ethernet controllers
      MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs

 .../devicetree/bindings/net/cdns,macb.yaml         |  38 ++-
 MAINTAINERS                                        |   2 +-
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts         |  26 ++
 arch/mips/boot/dts/mobileye/eyeq5.dtsi             |  34 ++
 arch/mips/mobileye/Kconfig                         |   1 +
 arch/mips/mobileye/Makefile                        |   2 +
 arch/mips/mobileye/eyeq5-iocu-dma.c                | 160 +++++++++
 drivers/net/ethernet/cadence/macb.h                |  56 ++-
 drivers/net/ethernet/cadence/macb_main.c           | 380 ++++++++++++---------
 9 files changed, 498 insertions(+), 201 deletions(-)
---
base-commit: bb26d1066f9db96d9b10d7724798aa14203f3ef8
change-id: 20250311-macb-65a7fa86af1d

Best regards,
-- 
Théo Lebrun <theo.lebrun@bootlin.com>


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv