[PATCH v4 0/3] clk: spacemit: fix i2s clock

[PATCH v4 0/3] clk: spacemit: fix i2s clock

[Troy Mitchell]

Previously, the driver defined two clocks for the I2S controller:
i2s_bclk and its parent i2s_sysclk.

Both i2s_bclk and i2s_sysclk were treated as fixed-rate clocks,
which clearly does not reflect the practical requirements for I2S operation.

Additionally, the original driver overlooked some upstream clock sources.

To fix the I2S clock, this series also introduces several new clock definition macros.

The I2S clock hierarchy can be found here [1].

Link:
https://developer.spacemit.com/documentation?token=LCrKwWDasiJuROkVNusc2pWTnEb
[1]

Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
---
Changes in v4:
- drop the erroneous change in ccu_mix.h(patch3/3)
- modify comment
- modify commit msg
- Link to v3: https://lore.kernel.org/r/20250818-k1-clk-i2s-generation-v3-0-8139b22ae709@linux.spacemit.com

Changes in v3:
- remove factor for CCU_DIV_GATE_DEFINE
- introduce I2S_BCLK_FACTOR as I2S_BCLK parent clock
- adjust consumers in patch2/3
- Link to v2: https://lore.kernel.org/all/20250811-k1-clk-i2s-generation-v2-0-e4d3ec268b7a@linux.spacemit.com/

Changes in v2:
- remove CCU_DDN_GATE_DEFINE
- remove CCU_DIV_TABLE_GATE_DEFINE
- move gate of i2s_sysclk from DDN to MUX
- introduce factor for CCU_DIV_GATE_DEFINE
- modify commit message
- split patch2/2 into separate patches
- remove reformatting in k1-syscon.h
- Link to v1: https://lore.kernel.org/r/20250807-k1-clk-i2s-generation-v1-0-7dc25eb4e4d3@linux.spacemit.com

---
Troy Mitchell (3):
      dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock
      clk: spacemit: introduce pre-div for ddn clock
      clk: spacemit: fix i2s clock

 drivers/clk/spacemit/ccu-k1.c                  | 32 ++++++++++++++++++++++----
 drivers/clk/spacemit/ccu_ddn.c                 | 12 +++++-----
 drivers/clk/spacemit/ccu_ddn.h                 |  6 +++--
 include/dt-bindings/clock/spacemit,k1-syscon.h |  4 ++++
 include/soc/spacemit/k1-syscon.h               |  1 +
 5 files changed, 43 insertions(+), 12 deletions(-)
---
base-commit: e3324912fe5a05a3ea439df476625e7c8efc2b9a
change-id: 20250804-k1-clk-i2s-generation-eee7049ee17a

Best regards,
-- 
Troy Mitchell <troy.mitchell@linux.spacemit.com>


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v4 1/3] dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock

[Troy Mitchell]

Previously, the K1 clock driver did not include the parent clocks of
the I2S sysclk.

Introduce pre-clock to fix I2S clock.

Otherwise, the I2S clock may not work as expected.

This patch adds their definitions to allow proper registration
in the driver and usage in the device tree.

Fixes: 1b72c59db0add ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
---
 include/dt-bindings/clock/spacemit,k1-syscon.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/dt-bindings/clock/spacemit,k1-syscon.h b/include/dt-bindings/clock/spacemit,k1-syscon.h
index 2714c3fe66cd5b49e12c8b20689f5b01da36b774..ad62525be43a909633f8d3a65ece1acd60ba8052 100644
--- a/include/dt-bindings/clock/spacemit,k1-syscon.h
+++ b/include/dt-bindings/clock/spacemit,k1-syscon.h
@@ -77,6 +77,10 @@
 #define CLK_I2S_BCLK		30
 #define CLK_APB			31
 #define CLK_WDT_BUS		32
+#define CLK_I2S_153P6		33
+#define CLK_I2S_153P6_BASE	34
+#define CLK_I2S_SYSCLK_SRC	35
+#define CLK_I2S_BCLK_FACTOR	36
 
 /* MPMU resets */
 #define RESET_WDT		0

-- 
2.50.1



_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v4 2/3] clk: spacemit: introduce pre-div for ddn clock

[Troy Mitchell]

The original DDN operations applied an implicit divide-by-2, which should
not be a default behavior.

This patch removes that assumption, letting each clock define its
actual behavior explicitly.

Reviewed-by: Haylen Chu <heylenay@4d2.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
---
 drivers/clk/spacemit/ccu-k1.c  |  4 ++--
 drivers/clk/spacemit/ccu_ddn.c | 12 ++++++------
 drivers/clk/spacemit/ccu_ddn.h |  6 ++++--
 3 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 65e6de030717afa60eefab7bda88f9a13b857650..7155824673fb450971439873b6b6163faf48c7e5 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -136,8 +136,8 @@ CCU_GATE_DEFINE(pll1_d3_819p2, CCU_PARENT_HW(pll1_d3), MPMU_ACGR, BIT(14), 0);
 CCU_GATE_DEFINE(pll1_d2_1228p8, CCU_PARENT_HW(pll1_d2), MPMU_ACGR, BIT(16), 0);
 
 CCU_GATE_DEFINE(slow_uart, CCU_PARENT_NAME(osc), MPMU_ACGR, BIT(1), CLK_IGNORE_UNUSED);
-CCU_DDN_DEFINE(slow_uart1_14p74, pll1_d16_153p6, MPMU_SUCCR, 16, 13, 0, 13, 0);
-CCU_DDN_DEFINE(slow_uart2_48, pll1_d4_614p4, MPMU_SUCCR_1, 16, 13, 0, 13, 0);
+CCU_DDN_DEFINE(slow_uart1_14p74, pll1_d16_153p6, MPMU_SUCCR, 16, 13, 0, 13, 2, 0);
+CCU_DDN_DEFINE(slow_uart2_48, pll1_d4_614p4, MPMU_SUCCR_1, 16, 13, 0, 13, 2, 0);
 
 CCU_GATE_DEFINE(wdt_clk, CCU_PARENT_HW(pll1_d96_25p6), MPMU_WDTPCR, BIT(1), 0);
 
diff --git a/drivers/clk/spacemit/ccu_ddn.c b/drivers/clk/spacemit/ccu_ddn.c
index be311b045698e95a688a35858a8ac1bcfbffd2c7..06d86748182bd1959cdab5c18d0a882ee25dcade 100644
--- a/drivers/clk/spacemit/ccu_ddn.c
+++ b/drivers/clk/spacemit/ccu_ddn.c
@@ -22,21 +22,21 @@
 
 #include "ccu_ddn.h"
 
-static unsigned long ccu_ddn_calc_rate(unsigned long prate,
-				       unsigned long num, unsigned long den)
+static unsigned long ccu_ddn_calc_rate(unsigned long prate, unsigned long num,
+				       unsigned long den, unsigned int pre_div)
 {
-	return prate * den / 2 / num;
+	return prate * den / pre_div / num;
 }
 
 static unsigned long ccu_ddn_calc_best_rate(struct ccu_ddn *ddn,
 					    unsigned long rate, unsigned long prate,
 					    unsigned long *num, unsigned long *den)
 {
-	rational_best_approximation(rate, prate / 2,
+	rational_best_approximation(rate, prate / ddn->pre_div,
 				    ddn->den_mask >> ddn->den_shift,
 				    ddn->num_mask >> ddn->num_shift,
 				    den, num);
-	return ccu_ddn_calc_rate(prate, *num, *den);
+	return ccu_ddn_calc_rate(prate, *num, *den, ddn->pre_div);
 }
 
 static long ccu_ddn_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -58,7 +58,7 @@ static unsigned long ccu_ddn_recalc_rate(struct clk_hw *hw, unsigned long prate)
 	num = (val & ddn->num_mask) >> ddn->num_shift;
 	den = (val & ddn->den_mask) >> ddn->den_shift;
 
-	return ccu_ddn_calc_rate(prate, num, den);
+	return ccu_ddn_calc_rate(prate, num, den, ddn->pre_div);
 }
 
 static int ccu_ddn_set_rate(struct clk_hw *hw, unsigned long rate,
diff --git a/drivers/clk/spacemit/ccu_ddn.h b/drivers/clk/spacemit/ccu_ddn.h
index a52fabe77d62eba16426867a9c13481e72f025c0..4838414a8e8dc04af49d3b8d39280efedbd75616 100644
--- a/drivers/clk/spacemit/ccu_ddn.h
+++ b/drivers/clk/spacemit/ccu_ddn.h
@@ -18,13 +18,14 @@ struct ccu_ddn {
 	unsigned int num_shift;
 	unsigned int den_mask;
 	unsigned int den_shift;
+	unsigned int pre_div;
 };
 
 #define CCU_DDN_INIT(_name, _parent, _flags) \
 	CLK_HW_INIT_HW(#_name, &_parent.common.hw, &spacemit_ccu_ddn_ops, _flags)
 
 #define CCU_DDN_DEFINE(_name, _parent, _reg_ctrl, _num_shift, _num_width,	\
-		       _den_shift, _den_width, _flags)				\
+		       _den_shift, _den_width, _pre_div, _flags)		\
 static struct ccu_ddn _name = {							\
 	.common = {								\
 		.reg_ctrl	= _reg_ctrl,					\
@@ -33,7 +34,8 @@ static struct ccu_ddn _name = {							\
 	.num_mask	= GENMASK(_num_shift + _num_width - 1, _num_shift),	\
 	.num_shift	= _num_shift,						\
 	.den_mask	= GENMASK(_den_shift + _den_width - 1, _den_shift),	\
-	.den_shift	= _den_shift,					\
+	.den_shift	= _den_shift,						\
+	.pre_div	= _pre_div,						\
 }
 
 static inline struct ccu_ddn *hw_to_ccu_ddn(struct clk_hw *hw)

-- 
2.50.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v4 3/3] clk: spacemit: fix i2s clock

[Troy Mitchell]

Defining i2s_bclk and i2s_sysclk as fixed-rate clocks is insufficient
for real I2S use cases.

Moreover, the current I2S clock configuration does not work as expected
due to missing parent clocks.

This patch adds the missing parent clocks, defines i2s_sysclk as
a DDN clock, and i2s_bclk as a DIV clock.

A special note for i2s_bclk:

From the register definition, the i2s_bclk divider always implies
an additional 1/2 factor.

The following table shows the correspondence between index
and frequency division coefficients:

| index |  div  |
|-------|-------|
|   0   |   2   |
|   1   |   4   |
|   2   |   6   |
|   3   |   8   |

From a software perspective, introducing i2s_bclk_factor as the
parent of i2s_bclk is sufficient to address the issue.

The I2S-related clock registers can be found here [1].

Link:
https://developer.spacemit.com/documentation?token=LCrKwWDasiJuROkVNusc2pWTnEb
[1]

Fixes: 1b72c59db0add ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Co-developer: Jinmei Wei <weijinmei@linux.spacemit.com>
Suggested-by: Haylen Chu <heylenay@4d2.org>
Signed-off-by: Jinmei Wei <weijinmei@linux.spacemit.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
---
 drivers/clk/spacemit/ccu-k1.c    | 28 ++++++++++++++++++++++++++--
 include/soc/spacemit/k1-syscon.h |  1 +
 2 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 7155824673fb450971439873b6b6163faf48c7e5..50b472a2721121414f33e9fac6370f544e6b8229 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -141,8 +141,28 @@ CCU_DDN_DEFINE(slow_uart2_48, pll1_d4_614p4, MPMU_SUCCR_1, 16, 13, 0, 13, 2, 0);
 
 CCU_GATE_DEFINE(wdt_clk, CCU_PARENT_HW(pll1_d96_25p6), MPMU_WDTPCR, BIT(1), 0);
 
-CCU_FACTOR_GATE_DEFINE(i2s_sysclk, CCU_PARENT_HW(pll1_d16_153p6), MPMU_ISCCR, BIT(31), 50, 1);
-CCU_FACTOR_GATE_DEFINE(i2s_bclk, CCU_PARENT_HW(i2s_sysclk), MPMU_ISCCR, BIT(29), 1, 1);
+CCU_FACTOR_DEFINE(i2s_153p6, CCU_PARENT_HW(pll1_d8_307p2), 2, 1);
+
+static const struct clk_parent_data i2s_153p6_base_parents[] = {
+	CCU_PARENT_HW(i2s_153p6),
+	CCU_PARENT_HW(pll1_d8_307p2),
+};
+CCU_MUX_DEFINE(i2s_153p6_base, i2s_153p6_base_parents, MPMU_FCCR, 29, 1, 0);
+
+static const struct clk_parent_data i2s_sysclk_src_parents[] = {
+	CCU_PARENT_HW(pll1_d96_25p6),
+	CCU_PARENT_HW(i2s_153p6_base)
+};
+CCU_MUX_GATE_DEFINE(i2s_sysclk_src, i2s_sysclk_src_parents, MPMU_ISCCR, 30, 1, BIT(31), 0);
+
+CCU_DDN_DEFINE(i2s_sysclk, i2s_sysclk_src, MPMU_ISCCR, 0, 15, 15, 12, 1, 0);
+
+CCU_FACTOR_DEFINE(i2s_bclk_factor, CCU_PARENT_HW(i2s_sysclk), 2, 1);
+/*
+ * Divider of i2s_bclk always implies a 1/2 factor, which is
+ * described by i2s_bclk_factor.
+ */
+CCU_DIV_GATE_DEFINE(i2s_bclk, CCU_PARENT_HW(i2s_bclk_factor), MPMU_ISCCR, 27, 2, BIT(29), 0);
 
 static const struct clk_parent_data apb_parents[] = {
 	CCU_PARENT_HW(pll1_d96_25p6),
@@ -756,6 +776,10 @@ static struct clk_hw *k1_ccu_mpmu_hws[] = {
 	[CLK_I2S_BCLK]		= &i2s_bclk.common.hw,
 	[CLK_APB]		= &apb_clk.common.hw,
 	[CLK_WDT_BUS]		= &wdt_bus_clk.common.hw,
+	[CLK_I2S_153P6]		= &i2s_153p6.common.hw,
+	[CLK_I2S_153P6_BASE]	= &i2s_153p6_base.common.hw,
+	[CLK_I2S_SYSCLK_SRC]	= &i2s_sysclk_src.common.hw,
+	[CLK_I2S_BCLK_FACTOR]	= &i2s_bclk_factor.common.hw,
 };
 
 static const struct spacemit_ccu_data k1_ccu_mpmu_data = {
diff --git a/include/soc/spacemit/k1-syscon.h b/include/soc/spacemit/k1-syscon.h
index c59bd7a38e5b4219121341b9c0d9ffda13a9c3e2..354751562c55523ef8a22be931ddd8aca9651084 100644
--- a/include/soc/spacemit/k1-syscon.h
+++ b/include/soc/spacemit/k1-syscon.h
@@ -30,6 +30,7 @@ to_spacemit_ccu_adev(struct auxiliary_device *adev)
 
 /* MPMU register offset */
 #define MPMU_POSR			0x0010
+#define MPMU_FCCR			0x0008
 #define  POSR_PLL1_LOCK			BIT(27)
 #define  POSR_PLL2_LOCK			BIT(28)
 #define  POSR_PLL3_LOCK			BIT(29)

-- 
2.50.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv