Linux-RISC-V Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V ARCHITECTURE),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support)
Subject: [PATCH 1/3] riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3
Date: Sun, 21 Sep 2025 23:01:41 +0200	[thread overview]
Message-ID: <20250921210237.943370-2-aurelien@aurel32.net> (raw)
In-Reply-To: <20250921210237.943370-1-aurelien@aurel32.net>

Define properties for the I2C adapter, and enable it on the BPI-F3. It
will be used by the 24c02 eeprom.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts |  6 ++++++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi    |  7 +++++++
 arch/riscv/boot/dts/spacemit/k1.dtsi            | 13 +++++++++++++
 3 files changed, 26 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 66375fd1e9974..3b6e4f52e9aad 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -111,6 +111,12 @@ rgmii1: phy@1 {
 	};
 };
 
+&i2c2 {
+	pinctrl-0 = <&i2c2_0_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &i2c8 {
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
index c9e9a844d2b1c..d565882c46dd7 100644
--- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
@@ -92,6 +92,13 @@ gmac1-pins {
 		};
 	};
 
+	i2c2_0_cfg: i2c2-0-cfg {
+		i2c2-0-pins {
+			pinmux = <K1_PADCONF(84, 4)>,	/* I2C2_SCL */
+				 <K1_PADCONF(85, 4)>;	/* I2C2_SDA */
+		};
+	};
+
 	i2c8_cfg: i2c8-cfg {
 		i2c8-0-pins {
 			pinmux = <K1_PADCONF(93, 0)>,	/* PWR_SCL */
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index bc61a380baca8..d4f38ded52c93 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -497,6 +497,19 @@ pwm7: pwm@d401bc00 {
 			status = "disabled";
 		};
 
+		i2c2: i2c@d4012000 {
+			compatible = "spacemit,k1-i2c";
+			reg = <0x0 0xd4012000 0x0 0x38>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&syscon_apbc CLK_TWSI2>,
+				 <&syscon_apbc CLK_TWSI2_BUS>;
+			clock-names = "func", "bus";
+			clock-frequency = <400000>;
+			interrupts = <38>;
+			status = "disabled";
+		};
+
 		i2c8: i2c@d401d800 {
 			compatible = "spacemit,k1-i2c";
 			reg = <0x0 0xd401d800 0x0 0x38>;
-- 
2.47.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2025-09-21 21:03 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-21 21:01 [PATCH 0/3] riscv: dts: spacemit: add 24c02 eeprom on BPI-F3 Aurelien Jarno
2025-09-21 21:01 ` Aurelien Jarno [this message]
2025-09-23  1:32   ` [PATCH 1/3] riscv: dts: spacemit: enable the i2c2 adapter " Troy Mitchell
2025-09-23 19:16     ` Aurelien Jarno
2025-09-24  3:13       ` Troy Mitchell
2025-09-24 19:11         ` Aurelien Jarno
2025-09-21 21:01 ` [PATCH 2/3] riscv: dts: spacemit: add 24c02 eeprom " Aurelien Jarno
2025-09-22  3:21   ` Yixun Lan
2025-09-22  4:49     ` Aurelien Jarno
2025-09-22  8:01       ` Yixun Lan
2025-09-22 21:00         ` Aurelien Jarno
2025-09-23  1:42       ` Troy Mitchell
2025-09-23 19:38         ` Aurelien Jarno
2025-09-23  2:00   ` Troy Mitchell
2025-09-23 19:21     ` Aurelien Jarno
2025-09-23  6:32   ` Vivian Wang
2025-09-23 19:30     ` Aurelien Jarno
2025-09-21 21:01 ` [PATCH 3/3] riscv: dts: spacemit: add i2c aliases " Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250921210237.943370-2-aurelien@aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@gentoo.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox