[PATCH v2 4/6] i2c: spacemit: check SDA instead of SCL after bus reset

[Troy Mitchell <troy.mitchell@linux.spacemit.com>]

After calling spacemit_i2c_conditionally_reset_bus(),
the controller should ensure that the SDA line is release
before proceeding.

Previously, the driver checked the SCL line instead,
which does not guarantee that the bus is truly idle.

This patch changes the check to verify SDA. This ensures
proper bus recovery and avoids potential communication errors
after a conditional reset.

Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
---
 drivers/i2c/busses/i2c-k1.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
index 9bf9f01aa68bde6460e50c6983edc3f705b12eea..848dfaf634f63021bc565f2c0a1c93f9f33665dd 100644
--- a/drivers/i2c/busses/i2c-k1.c
+++ b/drivers/i2c/busses/i2c-k1.c
@@ -172,9 +172,9 @@ static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c)
 	spacemit_i2c_reset(i2c);
 	usleep_range(10, 20);
 
-	/* check scl status again */
+	/* check sda again here */
 	status = readl(i2c->base + SPACEMIT_IBMR);
-	if (!(status & SPACEMIT_BMR_SCL))
+	if (!(status & SPACEMIT_BMR_SDA))
 		dev_warn_ratelimited(i2c->dev, "unit reset failed\n");
 }
 

-- 
2.51.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv