linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: E Shattow <e@freeshell.de>
To: Emil Renner Berthing <kernel@esmil.dk>,
	Conor Dooley <conor@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>
Cc: E Shattow <e@freeshell.de>,
	linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards
Date: Sun,  5 Oct 2025 10:44:28 -0700	[thread overview]
Message-ID: <20251005174450.1949110-1-e@freeshell.de> (raw)

Prepare for Orange Pi RV using jh7110-common.dtsi having GPIO62 assignment
different than mmc0 reset by splitting this out into each board dts.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi     | 11 -----------
 .../dts/starfive/jh7110-deepcomputing-fml13v01.dts  | 13 +++++++++++++
 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts  | 13 +++++++++++++
 .../boot/dts/starfive/jh7110-milkv-marscm.dtsi      | 13 +++++++++++++
 .../boot/dts/starfive/jh7110-pine64-star64.dts      | 13 +++++++++++++
 .../dts/starfive/jh7110-starfive-visionfive-2.dtsi  | 13 +++++++++++++
 6 files changed, 65 insertions(+), 11 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 5dc15e48b74b..083ec80b4e44 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -444,17 +444,6 @@ GPOEN_SYS_I2C6_DATA,
 	};
 
 	mmc0_pins: mmc0-0 {
-		 rst-pins {
-			pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
-					      GPOEN_ENABLE,
-					      GPI_NONE)>;
-			bias-pull-up;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
 		mmc-pins {
 			pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
 				 <PINMUX(PAD_SD0_CMD, 0)>,
diff --git a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
index f2857d021d68..0243e54a84ed 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
@@ -11,6 +11,19 @@ / {
 	compatible = "deepcomputing,fml13v01", "starfive,jh7110";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie1 {
 	perst-gpios = <&sysgpio 21 GPIO_ACTIVE_LOW>;
 	phys = <&pciephy1>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
index fdaf6b4557da..5ca10597dcd9 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
@@ -22,6 +22,19 @@ &i2c0 {
 	status = "okay";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
index 25b70af564ee..025471061d43 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
@@ -40,6 +40,19 @@ &i2c6 {
 	status = "disabled";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &mmc1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index 31e825be2065..980e24e3dbc8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -44,6 +44,19 @@ &i2c0 {
 	status = "okay";
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie1 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 5f14afb2c24d..574e128138c2 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -41,6 +41,19 @@ &mmc0 {
 	non-removable;
 };
 
+&mmc0_pins {
+	 rst-pins {
+		pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+		bias-pull-up;
+		drive-strength = <12>;
+		input-disable;
+		input-schmitt-disable;
+		slew-rate = <0>;
+	};
+};
+
 &pcie0 {
 	status = "okay";
 };

base-commit: 6093a688a07da07808f0122f9aa2a3eed250d853
-- 
2.50.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2025-10-05 17:46 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-05 17:44 E Shattow [this message]
2025-10-20 17:36 ` [PATCH] dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251005174450.1949110-1-e@freeshell.de \
    --to=e@freeshell.de \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@esmil.dk \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).