From: Nathan Chancellor <nathan@kernel.org>
To: Conor Dooley <conor@kernel.org>
Cc: linux-gpio@vger.kernel.org,
Conor Dooley <conor.dooley@microchip.com>,
Daire McNamara <daire.mcnamara@microchip.com>,
Linus Walleij <linus.walleij@linaro.org>,
Nick Desaulniers <nick.desaulniers+lkml@gmail.com>,
Bill Wendling <morbo@google.com>,
Justin Stitt <justinstitt@google.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
llvm@lists.linux.dev
Subject: Re: [PATCH v1] pinctrl: mpfs-iomux0: fix compile-time constant warning for LLVM prior to 17
Date: Wed, 29 Oct 2025 10:20:36 -0700 [thread overview]
Message-ID: <20251029172036.GA1130586@ax162> (raw)
In-Reply-To: <20251029-isolation-shield-b66aea79a9a4@spud>
On Wed, Oct 29, 2025 at 03:29:35PM +0000, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
>
> With LLVM prior to 17.0.0:
>
> drivers/pinctrl/pinctrl-mpfs-iomux0.c:89:2: error: initializer element is not a compile-time constant
> MPFS_IOMUX0_GROUP(spi0),
> ^~~~~~~~~~~~~~~~~~~~~~~
> drivers/pinctrl/pinctrl-mpfs-iomux0.c:79:10: note: expanded from macro 'MPFS_IOMUX0_GROUP'
> .mask = BIT(mpfs_iomux0_##_name##_pins[0]), \
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> include/vdso/bits.h:7:19: note: expanded from macro 'BIT'
> \#define BIT(nr) (UL(1) << (nr))
> ^~~~~~~~~~~~~~~
>
> This is a constant, but LLVM prior to a change from Nick to match the
> gcc behaviour did not allow this. The macro isn't really all that much
> of an idiot-proofing, just change it to the same sort that's in the
> gpio2 driver, where a second argument provides the mask/setting.
>
> Reported-by: Nathan Chancellor <nathan@kernel.org>
> Link: https://github.com/ClangBuiltLinux/linux/issues/2140
> Fixes: 46397274da22 ("pinctrl: add polarfire soc iomux0 pinmux driver")
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Thanks a lot for the quick fix!
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
> ---
>
> Not entirely sold on the fixes tag since it's to shut up an old
> compiler, but no harm in it I guess.
>
> CC: Conor Dooley <conor.dooley@microchip.com>
> CC: Daire McNamara <daire.mcnamara@microchip.com>
> CC: Linus Walleij <linus.walleij@linaro.org>
> CC: Nathan Chancellor <nathan@kernel.org>
> CC: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
> CC: Bill Wendling <morbo@google.com>
> CC: Justin Stitt <justinstitt@google.com>
> CC: linux-riscv@lists.infradead.org
> CC: linux-gpio@vger.kernel.org
> CC: linux-kernel@vger.kernel.org
> CC: llvm@lists.linux.dev
> ---
> drivers/pinctrl/pinctrl-mpfs-iomux0.c | 36 +++++++++++++--------------
> 1 file changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-mpfs-iomux0.c b/drivers/pinctrl/pinctrl-mpfs-iomux0.c
> index 49d9fcec0a16..cf5b2e4e8f5b 100644
> --- a/drivers/pinctrl/pinctrl-mpfs-iomux0.c
> +++ b/drivers/pinctrl/pinctrl-mpfs-iomux0.c
> @@ -73,33 +73,33 @@ static const unsigned int mpfs_iomux0_uart4_pins[] = { 11 };
> static const unsigned int mpfs_iomux0_mdio0_pins[] = { 12 };
> static const unsigned int mpfs_iomux0_mdio1_pins[] = { 13 };
>
> -#define MPFS_IOMUX0_GROUP(_name) { \
> +#define MPFS_IOMUX0_GROUP(_name, _mask) { \
> .name = #_name "_mssio", \
> .pins = mpfs_iomux0_##_name##_pins, \
> - .mask = BIT(mpfs_iomux0_##_name##_pins[0]), \
> + .mask = _mask, \
> .setting = 0x0, \
> }, { \
> .name = #_name "_fabric", \
> .pins = mpfs_iomux0_##_name##_pins, \
> - .mask = BIT(mpfs_iomux0_##_name##_pins[0]), \
> - .setting = BIT(mpfs_iomux0_##_name##_pins[0]), \
> + .mask = _mask, \
> + .setting = _mask, \
> }
>
> static const struct mpfs_iomux0_pin_group mpfs_iomux0_pin_groups[] = {
> - MPFS_IOMUX0_GROUP(spi0),
> - MPFS_IOMUX0_GROUP(spi1),
> - MPFS_IOMUX0_GROUP(i2c0),
> - MPFS_IOMUX0_GROUP(i2c1),
> - MPFS_IOMUX0_GROUP(can0),
> - MPFS_IOMUX0_GROUP(can1),
> - MPFS_IOMUX0_GROUP(qspi),
> - MPFS_IOMUX0_GROUP(uart0),
> - MPFS_IOMUX0_GROUP(uart1),
> - MPFS_IOMUX0_GROUP(uart2),
> - MPFS_IOMUX0_GROUP(uart3),
> - MPFS_IOMUX0_GROUP(uart4),
> - MPFS_IOMUX0_GROUP(mdio0),
> - MPFS_IOMUX0_GROUP(mdio1),
> + MPFS_IOMUX0_GROUP(spi0, BIT(0)),
> + MPFS_IOMUX0_GROUP(spi1, BIT(1)),
> + MPFS_IOMUX0_GROUP(i2c0, BIT(2)),
> + MPFS_IOMUX0_GROUP(i2c1, BIT(3)),
> + MPFS_IOMUX0_GROUP(can0, BIT(4)),
> + MPFS_IOMUX0_GROUP(can1, BIT(5)),
> + MPFS_IOMUX0_GROUP(qspi, BIT(6)),
> + MPFS_IOMUX0_GROUP(uart0, BIT(7)),
> + MPFS_IOMUX0_GROUP(uart1, BIT(8)),
> + MPFS_IOMUX0_GROUP(uart2, BIT(9)),
> + MPFS_IOMUX0_GROUP(uart3, BIT(10)),
> + MPFS_IOMUX0_GROUP(uart4, BIT(11)),
> + MPFS_IOMUX0_GROUP(mdio0, BIT(12)),
> + MPFS_IOMUX0_GROUP(mdio1, BIT(13)),
> };
>
> static const char * const mpfs_iomux0_spi0_groups[] = { "spi0_mssio", "spi0_fabric" };
> --
> 2.51.0
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2025-10-29 17:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-29 15:29 [PATCH v1] pinctrl: mpfs-iomux0: fix compile-time constant warning for LLVM prior to 17 Conor Dooley
2025-10-29 17:20 ` Nathan Chancellor [this message]
2025-10-30 8:18 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251029172036.GA1130586@ax162 \
--to=nathan@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=conor@kernel.org \
--cc=daire.mcnamara@microchip.com \
--cc=justinstitt@google.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=llvm@lists.linux.dev \
--cc=morbo@google.com \
--cc=nick.desaulniers+lkml@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox