From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 158FFD185C6 for ; Thu, 8 Jan 2026 11:36:30 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:Cc:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=1sFARsp8MJbmbJskaM6TPqZlib6dJFnM2CmcRYJxGsA=; b=s/9h1n5sGh1Vaw my8uz5eCf915ok39Q/ILjNhLEhgKS/IMElpkwWQ8XkzKsReEqeJiUiQfLOhy6mvAc605/1mCYiPX/ fLgO7lKYkviZVsS0mExclhzGjDNGv3nAzHZ6D0VG+J5tFkU+RTbLLuGzqavXJofKN81VFrHB6aTdd 4rzQF07ePw22051DxY8lGI4rxVpi1vHFmXqvPIGZGv5YCiaz2fcIDujTQgZ3skBCcuL8JPm9WwV9t Iu7zD9okCdPmzymQWObfgVduiB2vy7YtE+eKkeDcaqbZm50rmtWug77jLCfneQ40PUH5GPA2NHnp/ 3PAdiOBaep4dPBJEPnMA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98.2 #2 (Red Hat Linux)) id 1vdoJM-0000000GrxR-0SI1; Thu, 08 Jan 2026 11:36:16 +0000 Received: from woodpecker.gentoo.org ([140.211.166.183] helo=smtp.gentoo.org) by bombadil.infradead.org with esmtps (Exim 4.98.2 #2 (Red Hat Linux)) id 1vdoJH-0000000GrwP-2YDA for linux-riscv@lists.infradead.org; Thu, 08 Jan 2026 11:36:14 +0000 Received: from localhost (unknown [116.232.18.222]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange secp256r1 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) (Authenticated sender: dlan) by smtp.gentoo.org (Postfix) with ESMTPSA id 60F90342189; Thu, 08 Jan 2026 11:36:09 +0000 (UTC) Date: Thu, 8 Jan 2026 19:36:05 +0800 From: Yixun Lan To: Ze Huang Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Paul Walmsley , Palmer Dabbelt , Albert Ou , Alexandre Ghiti , devicetree@vger.kernel.org, linux-riscv@lists.infradead.org, spacemit@lists.linux.dev, linux-kernel@vger.kernel.org, Aurelien Jarno Subject: Re: [PATCH v2 3/3] riscv: dts: spacemit: Enable USB3.0 on BananaPi-F3 Message-ID: <20260108113605-GYA4052@gentoo.org> References: <20260107-k1-usb3dts-v2-v2-0-e659b0f8fe1a@linux.dev> <20260107-k1-usb3dts-v2-v2-3-e659b0f8fe1a@linux.dev> <20260108012157-GYA2355@gentoo.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20260108012157-GYA2355@gentoo.org> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20260108_033611_673077_DA307E83 X-CRM114-Status: GOOD ( 26.37 ) X-BeenThere: linux-riscv@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-riscv" Errors-To: linux-riscv-bounces+linux-riscv=archiver.kernel.org@lists.infradead.org Hi Ze, I've done a quick check of the "regulator-always-on" issue, it's ok to drop the one from hub, but not the vbus one.. On 09:21 Thu 08 Jan , Yixun Lan wrote: > Hi Ze, > > thanks for your patch, I have few comments, see below.. > > On 20:05 Wed 07 Jan , Ze Huang wrote: > > Enable the DWC3 USB 3.0 controller and its associated usbphy2 on the > > Banana Pi F3 board. > > > > The board utilizes a VLI VL817 hub, which requires two separate power > > supplies: one VBUS and one for hub itself. Add two GPIO-controlled > > fixed-regulators to manage this. > > > > Tested-by: Aurelien Jarno > > Signed-off-by: Ze Huang > > --- > > arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 48 +++++++++++++++++++++++++ > > 1 file changed, 48 insertions(+) > > > > diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts > > index 3f10efd925dc..013df91c6a4c 100644 > > --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts > > +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts > > @@ -59,6 +59,26 @@ reg_vcc_4v: vcc-4v { > > regulator-always-on; > > vin-supply = <®_dc_in>; > > }; > > + > > + usb3_vbus: regulator-vbus-5v { > I've checked the schematics, the name is 5V_VBUS there, so for the consistency > with previous naming convention, let's change to: > usb3_vbus_5v: usb3-vbus-5v > > > + compatible = "regulator-fixed"; > > + regulator-name = "USB30_VBUS"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > .. > > + regulator-always-on; > do you think the "always-on" property really necessary? it indicate the > power regulator is critical, and should never been disabled even during > suspend/resume state, for the case of USB, I think it should be totally > fine to poweroff once the device is not used(suspended) or even disabled > > besides, the regulator is designed with a gpio enabling/disabling control > which means it can be powered to on/off state? > not ok to drop, see comment below at &usb_dwc3 > > + gpio = <&gpio K1_GPIO(97) GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + }; > > + > > + usb3_vhub: regulator-vhub-5v { > why use vhub, but not hub? where does this name come from? > > and for same reason, the name in schematics is VCC5V0_HUB, so how about > change it to: > usb3_hub_5v: usb3-hub-5v > > > + compatible = "regulator-fixed"; > > + regulator-name = "USB30_VHUB"; > ~~~need to fix too, if above is valid > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > .. > > + regulator-always-on; > ditto ok to drop, as it's already handled at drivers/usb/misc/onboard_usb_dev.c which will explicitly request the regulator and enable it > > + gpio = <&gpio K1_GPIO(123) GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + }; > > }; > > > > &combo_phy { > > @@ -67,6 +87,34 @@ &combo_phy { > > status = "okay"; > > }; > > > .. > > +&usbphy2 { > > + status = "okay"; > > +}; > > + > > +&usb_dwc3 { > > + dr_mode = "host"; > > + vbus-supply = <&usb3_vbus>; due to drivers/usb/dwc3/dwc3-generic-plat.c has no handler to request regulator there will be problem if "regulator-always-on" property is removed.. > > + #address-cells = <1>; > > + #size-cells = <0>; > > + status = "okay"; > > + -- Yixun Lan (dlan) _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv