From: Guodong Xu <guodong@riscstar.com>
To: Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@gentoo.org>,
Haylen Chu <heylenay@4d2.org>
Cc: Alex Elder <elder@riscstar.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
Guodong Xu <guodong@riscstar.com>
Subject: [PATCH v3 2/4] reset: Create subdirectory for SpacemiT drivers
Date: Tue, 20 Jan 2026 19:10:50 +0800 [thread overview]
Message-ID: <20260120-k3-reset-v3-2-effe87f4bdbe@riscstar.com> (raw)
In-Reply-To: <20260120-k3-reset-v3-0-effe87f4bdbe@riscstar.com>
Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.
Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.
Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.
Also sort the drivers/reset/Kconfig entries alphabetically.
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
---
v3: Add Alex's reviewed-by.
Remove the trailing empty newline in Makefile to keep constant style
with others in the reset folder.
v2: No change.
---
drivers/reset/Kconfig | 12 ++----------
drivers/reset/Makefile | 2 +-
drivers/reset/spacemit/Kconfig | 14 ++++++++++++++
drivers/reset/spacemit/Makefile | 2 ++
.../{reset-spacemit.c => spacemit/reset-spacemit-k1.c} | 0
5 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 6e5d6deffa7d..b110f0fa7bb1 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -299,15 +299,6 @@ config RESET_SOCFPGA
This enables the reset driver for the SoCFPGA ARMv7 platforms. This
driver gets initialized early during platform init calls.
-config RESET_SPACEMIT
- tristate "SpacemiT reset driver"
- depends on ARCH_SPACEMIT || COMPILE_TEST
- select AUXILIARY_BUS
- default ARCH_SPACEMIT
- help
- This enables the reset controller driver for SpacemiT SoCs,
- including the K1.
-
config RESET_SUNPLUS
bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
default ARCH_SUNPLUS
@@ -406,9 +397,10 @@ config RESET_ZYNQMP
This enables the reset controller driver for Xilinx ZynqMP SoCs.
source "drivers/reset/amlogic/Kconfig"
+source "drivers/reset/hisilicon/Kconfig"
+source "drivers/reset/spacemit/Kconfig"
source "drivers/reset/starfive/Kconfig"
source "drivers/reset/sti/Kconfig"
-source "drivers/reset/hisilicon/Kconfig"
source "drivers/reset/tegra/Kconfig"
endif
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 9c3e484dfd81..fc0cc99f8514 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -2,6 +2,7 @@
obj-y += core.o
obj-y += amlogic/
obj-y += hisilicon/
+obj-y += spacemit/
obj-y += starfive/
obj-y += sti/
obj-y += tegra/
@@ -38,7 +39,6 @@ obj-$(CONFIG_RESET_RZV2H_USB2PHY) += reset-rzv2h-usb2phy.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
-obj-$(CONFIG_RESET_SPACEMIT) += reset-spacemit.o
obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TH1520) += reset-th1520.o
diff --git a/drivers/reset/spacemit/Kconfig b/drivers/reset/spacemit/Kconfig
new file mode 100644
index 000000000000..552884e8b72a
--- /dev/null
+++ b/drivers/reset/spacemit/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config RESET_SPACEMIT_K1
+ tristate "SpacemiT K1 reset driver"
+ depends on ARCH_SPACEMIT || COMPILE_TEST
+ depends on SPACEMIT_K1_CCU
+ select AUXILIARY_BUS
+ default SPACEMIT_K1_CCU
+ help
+ Support for reset controller in SpacemiT K1 SoC.
+ This driver works with the SpacemiT K1 clock controller
+ unit (CCU) driver to provide reset control functionality
+ for various peripherals and subsystems in the SoC.
+
diff --git a/drivers/reset/spacemit/Makefile b/drivers/reset/spacemit/Makefile
new file mode 100644
index 000000000000..34e3350136bb
--- /dev/null
+++ b/drivers/reset/spacemit/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_RESET_SPACEMIT_K1) += reset-spacemit-k1.o
diff --git a/drivers/reset/reset-spacemit.c b/drivers/reset/spacemit/reset-spacemit-k1.c
similarity index 100%
rename from drivers/reset/reset-spacemit.c
rename to drivers/reset/spacemit/reset-spacemit-k1.c
--
2.43.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2026-01-20 11:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-20 11:10 [PATCH v3 0/4] reset: spacemit: Add support for SpacemiT K3 SoC Guodong Xu
2026-01-20 11:10 ` [PATCH v3 1/4] dt-bindings: soc: spacemit: Add K3 reset support and IDs Guodong Xu
2026-01-20 11:10 ` Guodong Xu [this message]
2026-01-20 11:10 ` [PATCH v3 3/4] reset: spacemit: Extract common K1 reset code Guodong Xu
2026-01-20 11:10 ` [PATCH v3 4/4] reset: spacemit: Add SpacemiT K3 reset driver Guodong Xu
2026-01-20 12:19 ` [PATCH v3 0/4] reset: spacemit: Add support for SpacemiT K3 SoC Guodong Xu
2026-01-23 1:24 ` Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260120-k3-reset-v3-2-effe87f4bdbe@riscstar.com \
--to=guodong@riscstar.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@gentoo.org \
--cc=elder@riscstar.com \
--cc=heylenay@4d2.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox