[PATCH v3 0/5] Enable Bluetooth and WiFi on K3 Pico ITX

From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	linux-riscv@lists.infradead.org (open list:RISC-V
	ARCHITECTURE:Keyword:riscv),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC
	Support:Keyword:spacemit)
Subject: [PATCH v3 0/5] Enable Bluetooth and WiFi on K3 Pico ITX
Date: Mon, 31 Aug 2026 06:44:20 +0200	[thread overview]
Message-ID: <20260831044540.3304350-1-aurelien@aurel32.net> (raw)

This patchset enables Bluetooth through USB on the K3 Pico ITX board and
adds the rfkill nodes for Bluetooth and WLAN so that the devices can be
activated.

Note that WLAN support also require the following patch series, but both
can be applied independently:
- https://lore.kernel.org/spacemit/20260709040027.958400-1-inochiama@gmail.com/

Changes v3 -> v4
- fully move the phy definition and the board level
- rebase on 7.3-rc1

Aurelien Jarno (5):
  riscv: dts: spacemit: k3: move USB3 phy to board level
  riscv: dts: spacemit: k3: add USB3 B and C controllers for Pico-ITX
    board
  riscv: dts: spacemit: k3: add rfkill node for Bluetooth on Pico-ITX
    board
  riscv: dts: spacemit: k3: add rfkill node for WLAN on the K3 Pico-ITX
    board
  riscv64: defconfig: Enable BT and WLAN support for SpacemiT K3
    Pico-ITX board

 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 38 ++++++++++++
 arch/riscv/boot/dts/spacemit/k3.dtsi         | 63 +++++++++++++++++++-
 arch/riscv/configs/defconfig                 |  8 +++
 3 files changed, 106 insertions(+), 3 deletions(-)

-- 
2.53.0

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv