Linux-RISC-V Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Changhuang Liang <changhuang.liang@starfivetech.com>
To: Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Paul Walmsley <pjw@kernel.org>, Albert Ou <aou@eecs.berkeley.edu>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Alexandre Ghiti <alex@ghiti.fr>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Bartosz Golaszewski <brgl@kernel.org>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	Lianfeng Ouyang <lianfeng.ouyang@starfivetech.com>,
	Changhuang Liang <changhuang.liang@starfivetech.com>
Subject: [PATCH v8 00/22] Add basic pinctrl drivers for JHB100 SoC
Date: Thu, 10 Sep 2026 03:03:35 -0700	[thread overview]
Message-ID: <20260910100357.130134-1-changhuang.liang@starfivetech.com> (raw)

The JHB100 SoC has 13 pinctrl domains - sys0, sys0h, sys1, sys2, per0, per1,
per2, per2pok, per3, adc0, adc1, emmc, and vga.

In the current series, we will only add the following pinctrl:
 - sys0, sys0h, sys1, sys2
 - per0, per1, per2, per2pok, per3

The remaining pinctrl will be implemented in future series.

This series depends on the series:
https://lore.kernel.org/all/20260508053632.818548-1-changhuang.liang@starfivetech.com/

Change since v7:
Add a new patch 21.

PATCH 3/5/7/9/11/13/15/17/19:
- Delete the file starfive,jhb100-pinctrl.h in the
  binding directory.

PATCH 4/6/8/9/10/12/14/16/18/20:
- Add definitions specific to .c files

v7: https://lore.kernel.org/all/20260831113514.66382-1-changhuang.liang@starfivetech.com/
v6: https://lore.kernel.org/all/20260829025720.23915-1-changhuang.liang@starfivetech.com/
v5: https://lore.kernel.org/all/20260810063650.239303-1-changhuang.liang@starfivetech.com/
v4: https://lore.kernel.org/all/20260801072711.153217-1-changhuang.liang@starfivetech.com/
v3: https://lore.kernel.org/all/20260603055347.66845-1-changhuang.liang@starfivetech.com/
v2: https://lore.kernel.org/all/20260514111218.94519-1-changhuang.liang@starfivetech.com/
v1: https://lore.kernel.org/all/20260424111330.702272-1-changhuang.liang@starfivetech.com/

Changhuang Liang (22):
  dt-bindings: pincfg-node: Add property 'input-debounce-ns'
  pinctrl: pinconf-generic: Add property 'input-debounce-ns'
  dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl
  pinctrl: starfive: Add StarFive JHB100 sys0 controller driver
  dt-bindings: pinctrl: Add starfive,jhb100-sys0h-pinctrl
  pinctrl: starfive: Add StarFive JHB100 sys0h controller driver
  dt-bindings: pinctrl: Add starfive,jhb100-sys1-pinctrl
  pinctrl: starfive: Add StarFive JHB100 sys1 controller driver
  dt-bindings: pinctrl: Add starfive,jhb100-sys2-pinctrl
  pinctrl: starfive: Add StarFive JHB100 sys2 controller driver
  dt-bindings: pinctrl: Add starfive,jhb100-per0-pinctrl
  pinctrl: starfive: Add StarFive JHB100 per0 controller driver
  dt-bindings: pinctrl: Add starfive,jhb100-per1-pinctrl
  pinctrl: starfive: Add StarFive JHB100 per1 controller driver
  dt-bindings: pinctrl: Add starfive,jhb100-per2-pinctrl
  pinctrl: starfive: Add StarFive JHB100 per2 controller driver
  dt-bindings: pinctrl: Add starfive,jhb100-per2pok-pinctrl
  pinctrl: starfive: Add StarFive JHB100 per2pok controller driver
  dt-bindings: pinctrl: Add starfive,jhb100-per3-pinctrl
  pinctrl: starfive: Add StarFive JHB100 per3 controller driver
  riscv: dts: starfive: Add JHB100 pinctrl pad number header
  riscv: dts: starfive: jhb100: Add pinctrl nodes

 .../bindings/pinctrl/pincfg-node.yaml         |   11 +
 .../pinctrl/starfive,jhb100-per0-pinctrl.yaml |  179 ++
 .../pinctrl/starfive,jhb100-per1-pinctrl.yaml |  178 ++
 .../pinctrl/starfive,jhb100-per2-pinctrl.yaml |  168 ++
 .../starfive,jhb100-per2pok-pinctrl.yaml      |  162 ++
 .../pinctrl/starfive,jhb100-per3-pinctrl.yaml |  166 ++
 .../pinctrl/starfive,jhb100-sys0-pinctrl.yaml |  164 ++
 .../starfive,jhb100-sys0h-pinctrl.yaml        |  162 ++
 .../pinctrl/starfive,jhb100-sys1-pinctrl.yaml |  164 ++
 .../pinctrl/starfive,jhb100-sys2-pinctrl.yaml |  165 ++
 MAINTAINERS                                   |    9 +
 arch/riscv/boot/dts/starfive/jhb100-evb1.dts  |    3 +
 .../boot/dts/starfive/jhb100-pinctrl.dtsi     |   23 +
 arch/riscv/boot/dts/starfive/jhb100.dtsi      |  107 ++
 .../dts/starfive/starfive,jhb100-pinctrl.h    |  247 +++
 drivers/pinctrl/pinconf-generic.c             |    2 +
 drivers/pinctrl/starfive/Kconfig              |  107 ++
 drivers/pinctrl/starfive/Makefile             |   11 +
 .../starfive/pinctrl-starfive-jhb100-per0.c   |  182 +++
 .../starfive/pinctrl-starfive-jhb100-per1.c   |  193 +++
 .../starfive/pinctrl-starfive-jhb100-per2.c   |  136 ++
 .../pinctrl-starfive-jhb100-per2pok.c         |   99 ++
 .../starfive/pinctrl-starfive-jhb100-per3.c   |  129 ++
 .../starfive/pinctrl-starfive-jhb100-sys0.c   |  121 ++
 .../starfive/pinctrl-starfive-jhb100-sys0h.c  |   99 ++
 .../starfive/pinctrl-starfive-jhb100-sys1.c   |   94 ++
 .../starfive/pinctrl-starfive-jhb100-sys2.c   |  140 ++
 .../starfive/pinctrl-starfive-jhb100.c        | 1446 +++++++++++++++++
 .../starfive/pinctrl-starfive-jhb100.h        |  153 ++
 include/linux/pinctrl/pinconf-generic.h       |    5 +
 30 files changed, 4825 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per0-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per1-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2pok-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per3-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0h-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys1-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys2-pinctrl.yaml
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100-pinctrl.dtsi
 create mode 100644 arch/riscv/boot/dts/starfive/starfive,jhb100-pinctrl.h
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per0.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per1.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per2.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per2pok.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per3.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys0.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys0h.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys1.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-sys2.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100.h

--
2.25.1

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2026-09-10 10:05 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-10 10:03 Changhuang Liang [this message]
2026-09-10 10:03 ` [PATCH v8 01/22] dt-bindings: pincfg-node: Add property 'input-debounce-ns' Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 02/22] pinctrl: pinconf-generic: " Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 03/22] dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 04/22] pinctrl: starfive: Add StarFive JHB100 sys0 controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 05/22] dt-bindings: pinctrl: Add starfive,jhb100-sys0h-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 06/22] pinctrl: starfive: Add StarFive JHB100 sys0h controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 07/22] dt-bindings: pinctrl: Add starfive,jhb100-sys1-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 08/22] pinctrl: starfive: Add StarFive JHB100 sys1 controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 09/22] dt-bindings: pinctrl: Add starfive,jhb100-sys2-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 10/22] pinctrl: starfive: Add StarFive JHB100 sys2 controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 11/22] dt-bindings: pinctrl: Add starfive,jhb100-per0-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 12/22] pinctrl: starfive: Add StarFive JHB100 per0 controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 13/22] dt-bindings: pinctrl: Add starfive,jhb100-per1-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 14/22] pinctrl: starfive: Add StarFive JHB100 per1 controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 15/22] dt-bindings: pinctrl: Add starfive,jhb100-per2-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 16/22] pinctrl: starfive: Add StarFive JHB100 per2 controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 17/22] dt-bindings: pinctrl: Add starfive,jhb100-per2pok-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 18/22] pinctrl: starfive: Add StarFive JHB100 per2pok controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 19/22] dt-bindings: pinctrl: Add starfive,jhb100-per3-pinctrl Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 20/22] pinctrl: starfive: Add StarFive JHB100 per3 controller driver Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 21/22] riscv: dts: starfive: Add JHB100 pinctrl pad number header Changhuang Liang
2026-09-10 10:03 ` [PATCH v8 22/22] riscv: dts: starfive: jhb100: Add pinctrl nodes Changhuang Liang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260910100357.130134-1-changhuang.liang@starfivetech.com \
    --to=changhuang.liang@starfivetech.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@esmil.dk \
    --cc=krzk+dt@kernel.org \
    --cc=lianfeng.ouyang@starfivetech.com \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox