From: Zongmin Zhou <min_halo@163.com>
To: pjw@kernel.org, palmer@dabbelt.com, aou@eecs.berkeley.edu, alex@ghiti.fr
Cc: david.laight.linux@gmail.com, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org,
Zongmin Zhou <zhouzongmin@kylinos.cn>
Subject: [RESEND PATCH v2] riscv: lib: optimize strchr() with Zbb extension
Date: Mon, 28 Sep 2026 17:01:23 +0800 [thread overview]
Message-ID: <20260928090123.43899-1-min_halo@163.com> (raw)
In-Reply-To: <20260512073006.363434-1-min_halo@163.com>
From: Zongmin Zhou <zhouzongmin@kylinos.cn>
Add a Zbb-powered optimization to the existing strchr() implementation
using the 'orc.b' instruction, following the same pattern established
by strnlen().
The Zbb variant processes data in word-sized chunks using orc.b to
detect both NUL terminators and target characters in parallel. On
systems without Zbb support, the original byte-by-byte implementation
is used as a fallback via the alternatives mechanism.
Benchmark results (QEMU TCG, rv64):
Length | zbb=off (MB/s) | zbb=on (MB/s) | Improvement
-------|----------------|---------------|------------
1 B | 27 | 24 | -11.1%
7 B | 148 | 125 | -15.5%
16 B | 218 | 363 | +66.5%
64 B | 384 | 1044 | +171.9%
512 B | 424 | 2081 | +390.8%
4096 B | 498 | 2636 | +429.3%
The regression on very short strings (1-7 bytes) is due to the fixed
overhead of the word-level path: broadcasting the target character to
all byte lanes via multiplication and checking pointer alignment before
entering the main loop. For strings shorter than one machine word, this
setup cost outweighs the benefit of parallel comparison. As string
length increases beyond 16 bytes, the word-at-a-time processing shows
significant gains.
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
---
Changes in v2:
- Move alignment handling out-of-line (optimize hot path).
- Hide load latency by reordering REG_L and addi.
- Simplify loop branching.
arch/riscv/lib/strchr.S | 119 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/arch/riscv/lib/strchr.S b/arch/riscv/lib/strchr.S
index 48c3a9da53e3..b7abf8b609b6 100644
--- a/arch/riscv/lib/strchr.S
+++ b/arch/riscv/lib/strchr.S
@@ -6,9 +6,15 @@
#include <linux/linkage.h>
#include <asm/asm.h>
+#include <asm/alternative-macros.h>
+#include <asm/hwcap.h>
/* char *strchr(const char *s, int c) */
SYM_FUNC_START(strchr)
+
+ __ALTERNATIVE_CFG("nop", "j strchr_zbb", 0, RISCV_ISA_EXT_ZBB,
+ IS_ENABLED(CONFIG_RISCV_ISA_ZBB) && IS_ENABLED(CONFIG_TOOLCHAIN_HAS_ZBB))
+
/*
* Parameters
* a0 - The string to be searched
@@ -29,6 +35,119 @@ SYM_FUNC_START(strchr)
li a0, 0
2:
ret
+
+/*
+ * Variant of strchr using the ZBB extension if available
+ *
+ * This implementation uses orc.b to detect both NUL terminators and target
+ * characters in parallel, processing word-sized chunks for efficiency.
+ */
+#if defined(CONFIG_RISCV_ISA_ZBB) && defined(CONFIG_TOOLCHAIN_HAS_ZBB)
+strchr_zbb:
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# define CZ clz
+#else
+# define CZ ctz
+#endif
+
+.option push
+.option arch,+zbb
+
+ /*
+ * Returns
+ * a0 - Address of first occurrence of 'c' or NULL
+ *
+ * Parameters
+ * a0 - String to search
+ * a1 - Character to find
+ *
+ * Clobbers
+ * t0, t1, t2, t3, t4
+ */
+
+ /*
+ * Prepare target character mask.
+ * Broadcast target character to all bytes using multiply.
+ */
+ andi a1, a1, 0xff
+ li t1, 0x01010101
+#if __riscv_xlen == 64
+ slli t2, t1, 32
+ or t1, t1, t2
+#endif
+ mul t2, a1, t1
+
+ /* All-ones mask for orc.b comparisons. */
+ li t4, -1
+
+ /* Check alignment: jump out-of-line if misaligned. */
+ andi t0, a0, SZREG-1
+ bnez t0, 10f
+
+ /* Entry Path A: Directly aligned. Pre-bias for the loop. */
+ addi a0, a0, -SZREG
+
+2:
+ /* Main loop: process word-sized chunks. */
+ REG_L t0, SZREG(a0)
+ addi a0, a0, SZREG
+
+ /* Check for NUL terminator. */
+ orc.b t1, t0
+ bne t1, t4, 3f
+
+ /* Check for target character. */
+ xor t1, t0, t2
+ orc.b t1, t1
+ beq t1, t4, 2b
+
+ /* Target found in chunk without NUL. */
+ not t1, t1
+ CZ t1, t1
+ srli t1, t1, 3
+ add a0, a0, t1
+ ret
+
+3:
+ /* NUL found in current chunk. Check if target appears before NUL. */
+ not t1, t1
+
+ xor t3, t0, t2
+ orc.b t3, t3
+ not t3, t3
+
+ CZ t3, t3
+ CZ t1, t1
+
+ /* If NUL appears before target, character not found. */
+ bltu t1, t3, 8f
+
+ srli t3, t3, 3
+ add a0, a0, t3
+ ret
+
+8:
+ /* Character not found, return NULL. */
+ li a0, 0
+9:
+ ret
+
+ /* --- Out-of-line: Handle misaligned portion byte-by-byte --- */
+10:
+ lbu t1, 0(a0)
+ beq t1, a1, 9b
+ beqz t1, 8b
+ addi a0, a0, 1
+ andi t0, a0, SZREG-1
+ bnez t0, 10b
+
+ /* Entry Path B: Misalignment fixed. Pre-bias and enter main loop. */
+ addi a0, a0, -SZREG
+ j 2b
+
+.option pop
+#endif
SYM_FUNC_END(strchr)
SYM_FUNC_ALIAS_WEAK(__pi_strchr, strchr)
--
2.43.0
No virus found
Checked by Hillstone Network AntiVirus
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
prev parent reply other threads:[~2026-09-28 9:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-07 2:06 [PATCH] riscv: lib: optimize strchr() with Zbb extension Zongmin Zhou
2026-05-07 10:22 ` David Laight
2026-05-12 7:30 ` [PATCH v2] " Zongmin Zhou
2026-09-28 9:01 ` Zongmin Zhou [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260928090123.43899-1-min_halo@163.com \
--to=min_halo@163.com \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=david.laight.linux@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=zhouzongmin@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox