[PATCH 0/2] SpacemiT K3 use 8gb memory size on CoM260 and Pico-ITX

From: E Shattow <e@freeshell.de>
To: Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>,
	Troy Mitchell <troy.mitchell@linux.spacemit.com>
Cc: linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
	E Shattow <e@freeshell.de>
Subject: [PATCH 0/2] SpacemiT K3 use 8gb memory size on CoM260 and Pico-ITX
Date: Sun, 15 Nov 2026 11:50:58 -0800	[thread overview]
Message-ID: <20261115195112.32120-1-e@freeshell.de> (raw)

Adjust from 16GiB to 8GiB memory size configuration on CoM260
and Pico-ITX for compatibility with 8GiB/16GiB/32GiB configurations.

It is expected that the bootloader will read EEPROM TLV value for
ID of the EEPROM part and adjust the device tree node accordingly.
In the simple case where adjustment is not performed however, then
the previous 16GiB range may overflow a 8GiB DRAM optioned board.

DeepComputing FML13v05 is sold in 16GiB/32GiB variants and not 8GiB
so it remains as 16GiB configuration.

E Shattow (2):
  riscv: dts: spacemit: k3: use com260 8gb memory configuration
  riscv: dts: spacemit: k3: use pico-itx 8gb memory configuration

 arch/riscv/boot/dts/spacemit/k3-com260.dtsi  | 2 +-
 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

base-commit: fa2933aac170dd19c6a7f0d7b81a8f537e40915c
-- 
2.53.0

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv