Re: [RESEND PATCH v2 1/3] dt-bindings: power: Add starfive,jh71xx-pmu

[Walker Chen <walker.chen@starfivetech.com>]

On 2022/12/8 16:59, Krzysztof Kozlowski wrote:
> On 08/12/2022 09:45, Walker Chen wrote:
>> Add bindings for Power Management Unit (PMU) on the StarFive JH71XX SoC.
>> 
>> Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
>> ---
>>  .../bindings/power/starfive,jh71xx-pmu.yaml   | 45 +++++++++++++++++++
>>  .../dt-bindings/power/starfive,jh7110-pmu.h   | 17 +++++++
>>  2 files changed, 62 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml
> 
> Filename matching compatible, so:
> starfive,jh7110-pmu.yaml

OK, will be fixed.

> 
> 
>>  create mode 100644 include/dt-bindings/power/starfive,jh7110-pmu.h
>> 
>> diff --git a/Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml b/Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml
>> new file mode 100644
>> index 000000000000..f308ae136a57
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml
>> @@ -0,0 +1,45 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/power/starfive,jh71xx-pmu.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: StarFive JH71xx Power Management Unit
>> +
>> +maintainers:
>> +  - Walker Chen <walker.chen@starfivetech.com>
>> +
>> +description: |
>> +  StarFive JH71xx SoCs include support for multiple power domains which can be
>> +  powered on/off by software based on different application scenes to save power.
>> +
>> +properties:
>> +  compatible:
>> +      - enum:
> 
> Wrong indentation.
> 
> Does not look like you tested the bindings. Please run `make
> dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).

This is my mistake, I forgot to make dt_binding_check for .yaml file.

> 
>> +          - starfive,jh7110-pmu
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  "#power-domain-cells":
>> +    const: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - "#power-domain-cells"
>> +
> 
> Best regards,
> Krzysztof
> 


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv