From: <Conor.Dooley@microchip.com>
To: <heiko@sntech.de>, <atishp@atishpatra.org>, <anup@brainfault.org>,
<will@kernel.org>, <mark.rutland@arm.com>,
<paul.walmsley@sifive.com>, <palmer@dabbelt.com>,
<aou@eecs.berkeley.edu>
Cc: <linux-riscv@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<philipp.tomsich@vrull.eu>, <cmuellner@linux.com>,
<samuel@sholland.org>, <guoren@kernel.org>
Subject: Re: [PATCH v2] drivers/perf: riscv_pmu_sbi: add support for PMU variant on T-Head C9xx cores
Date: Fri, 26 Aug 2022 17:57:33 +0000 [thread overview]
Message-ID: <5f72e3da-d87d-2d8d-bb4b-d95dca65d4f7@microchip.com> (raw)
In-Reply-To: <20220826163500.1748653-1-heiko@sntech.de>
On 26/08/2022 17:35, Heiko Stuebner wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> With the T-HEAD C9XX cores being designed before or during the ratification
> to the SSCOFPMF extension, they implement functionality very similar but
> not equal to it. So add some adaptions to allow the C9XX to still handle
> its PMU through the regular SBI PMU interface instead of defining new
> interfaces or drivers.
>
> To work properly, this requires a matching change in SBI, though the actual
> interface between kernel and SBI does not change.
>
> The main differences are a the overflow CSR and irq number.
>
> As the reading of the overflow-csr is in the hot-path during irq handling
Hey Heiko,
Very nitpicky, but I had to read this twice to get it.. If you respin,
it'd be worth adding a comma after "handling".
> use an errata and alternatives to not introduce new conditionals there.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> changes in v2:
> - use alternatives for the CSR access
> - make the irq num selection a bit nicer
>
> There is of course a matching opensbi-part whose current implementation can
> be found on [0], but as comments show, this needs some more work still.
>
>
> [0] https://patchwork.ozlabs.org/project/opensbi/cover/20220817112004.745776-1-heiko@sntech.de/
>
> arch/riscv/Kconfig.erratas | 14 ++++++++++++
> arch/riscv/errata/thead/errata.c | 19 +++++++++++++++++
> arch/riscv/include/asm/errata_list.h | 16 +++++++++++++-
> drivers/perf/riscv_pmu_sbi.c | 32 +++++++++++++++++++---------
> 4 files changed, 70 insertions(+), 11 deletions(-)
>
> diff --git a/arch/riscv/Kconfig.erratas b/arch/riscv/Kconfig.erratas
> index 6850e9389930..f1eaac4c0073 100644
> --- a/arch/riscv/Kconfig.erratas
> +++ b/arch/riscv/Kconfig.erratas
> @@ -66,4 +66,18 @@ config ERRATA_THEAD_CMO
>
> If you don't know what to do here, say "Y".
>
> +config ERRATA_THEAD_PMU
> + bool "Apply T-Head PMU errata"
> + depends on ERRATA_THEAD
> + depends on RISCV_PMU_SBI
> + default y
> + help
> + The T-Head C9xx cores implement a PMU overflow extension very
> + similar to the core SSCOFPMF extension.
> +
> + This will apply the overflow errata to handle the non-standard
> + behaviour via the regular SBI PMU driver and interface.
> +
> + If you don't know what to do here, say "Y".
> +
> endmenu # "CPU errata selection"
> diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c
> index 202c83f677b2..e6101eab25c8 100644
> --- a/arch/riscv/errata/thead/errata.c
> +++ b/arch/riscv/errata/thead/errata.c
> @@ -44,6 +44,22 @@ static bool errata_probe_cmo(unsigned int stage,
> #endif
> }
>
> +static bool errata_probe_pmu(unsigned int stage,
> + unsigned long arch_id, unsigned long impid)
> +{
> +#ifdef CONFIG_ERRATA_THEAD_PMU
Is there a reason that all the alternatives use ifdef
rather than if(IS_ENABLED())?
> + if (arch_id != 0 || impid != 0)
> + return false;
> +
> + if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
> + return false;
> +
> + return true;
> +#else
> + return false;
> +#endif
> +}
> +
> static u32 thead_errata_probe(unsigned int stage,
> unsigned long archid, unsigned long impid)
> {
> @@ -55,6 +71,9 @@ static u32 thead_errata_probe(unsigned int stage,
> if (errata_probe_cmo(stage, archid, impid))
> cpu_req_errata |= (1U << ERRATA_THEAD_CMO);
>
> + if (errata_probe_pmu(stage, archid, impid))
> + cpu_req_errata |= (1U << ERRATA_THEAD_PMU);
BIT(ERRATA_THEAD_PMU), no? Ditto for the CMO I guess..
> +
> return cpu_req_errata;
> }
>
Thanks,
Conor.
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-08-26 17:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-26 16:35 [PATCH v2] drivers/perf: riscv_pmu_sbi: add support for PMU variant on T-Head C9xx cores Heiko Stuebner
2022-08-26 17:57 ` Conor.Dooley [this message]
2022-08-30 14:33 ` Heiko Stübner
2022-08-30 15:02 ` Heiko Stübner
2022-08-30 15:32 ` Conor.Dooley
[not found] ` <CAOnJCUKB2xu+RST2qh2zC7=vcLzBs_x7B3i49bTnkoBWu3-0xA@mail.gmail.com>
2022-08-30 12:00 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f72e3da-d87d-2d8d-bb4b-d95dca65d4f7@microchip.com \
--to=conor.dooley@microchip.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=atishp@atishpatra.org \
--cc=cmuellner@linux.com \
--cc=guoren@kernel.org \
--cc=heiko@sntech.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=philipp.tomsich@vrull.eu \
--cc=samuel@sholland.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox