Re: [PATCH 3/4] clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL

[Drew Fustini <fustini@kernel.org>]

On Tue, Aug 12, 2025 at 01:42:57PM +0800, Icenowy Zheng wrote:
> The AXI crossbar of TH1520 has no proper timeout handling, which means
> gating AXI clocks can easily lead to bus timeout and thus system hang.
> 
> Set all AXI clock gates to CLK_IS_CRITICAL. All these clock gates are
> ungated by default on system reset.
> 
> In addition, convert all current CLK_IGNORE_UNUSED usage to
> CLK_IS_CRITICAL to prevent unwanted clock gating.
> 
> Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
> ---
>  drivers/clk/thead/clk-th1520-ap.c | 42 ++++++++++++++++---------------
>  1 file changed, 22 insertions(+), 20 deletions(-)

Thanks for working on the display controller. I'll review the series but
I wanted to point out a simple error first:

>  static CCU_GATE(CLK_NPU_AXI, npu_axi_clk, "npu-axi", axi_aclk_pd, 0x1c8, BIT(5), 0);
>  static CCU_GATE(CLK_CPU2VP, cpu2vp_clk, "cpu2vp", axi_aclk_pd, 0x1e0, BIT(13), 0);
> +static CCU_GATE(CLK_NPU_AXI, npu_axi_clk, "npu-axi", axi_aclk_pd, 0x1c8, BIT(5), CLK_IS_CRITICAL);
> +static CCU_GATE(CLK_CPU2VP, cpu2vp_clk, "cpu2vp", axi_aclk_pd, 0x1e0, BIT(13), CLK_IS_CRITICAL);

The compiler complains about redefinition of npu_axi_clk and cpu2vp_clk.
I've fixed it up by removing the old lines with '0' flags, but I'm
noting in case there is another revision.

Thanks,
Drew

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv