[PATCH v8 0/5] Add support for Andes Qilai SoC PCIe controller

[PATCH v8 0/5] Add support for Andes Qilai SoC PCIe controller

[Randolph Lin]

Add support for Andes Qilai SoC PCIe controller

These patches introduce driver support for the PCIe controller on the
Andes Qilai SoC.

Signed-off-by: Randolph Lin <randolph@andestech.com>

---
Changes in v8:
- Fix the compile error reported by the kernel test robot.

---
Changes in v7:
- Remove unnecessary nodes and property in DTS bindings

---
Changes in v6:
- Fix typo in the logic for adjusting the number of OB/IB windows

---
Changes in v5:
- Add support to adjust the number of OB/IB windows in the glue driver.
- Fix the number of OB windows in the Qilai PCIe driver.
- Remove meaningless properties from the device tree.
- Made minor adjustments based on the reviewer's suggestions.

---
Changes in v4:
- Add .post_init callback for enabling IOCP cache.  
- Sort by vender name in Kconfig 
- Using PROBE_PREFER_ASYNCHRONOUS as default probe type.
- Made minor adjustments based on the reviewer's suggestions.

---
Changes in v3:
- Remove outbound ATU address range validation callback and logic.
- Add logic to skip failed outbound iATU configuration and continue.
- Using PROBE_PREFER_ASYNCHRONOUS as default probe type.
- Made minor adjustments based on the reviewer's suggestions.

---
Changes in v2:
- Remove the patch that adds the dma-ranges property to the SoC node.
- Add dma-ranges to the PCIe parent node bus node.
- Refactor and rename outbound ATU address range validation callback and logic.
- Use parent_bus_offset instead of cpu_addr_fixup().
- Using PROBE_DEFAULT_STRATEGY as default probe type.
- Made minor adjustments based on the reviewer's suggestions.

Randolph Lin (5):
  PCI: dwc: Allow adjusting the number of ob/ib windows in glue driver
  dt-bindings: PCI: Add Andes QiLai PCIe support
  riscv: dts: andes: Add PCIe node into the QiLai SoC
  PCI: andes: Add Andes QiLai SoC PCIe host driver support
  MAINTAINERS: Add maintainers for Andes QiLai PCIe driver

 .../bindings/pci/andestech,qilai-pcie.yaml    |  84 ++++++
 MAINTAINERS                                   |   7 +
 arch/riscv/boot/dts/andes/qilai.dtsi          | 106 ++++++++
 drivers/pci/controller/dwc/Kconfig            |  13 +
 drivers/pci/controller/dwc/Makefile           |   1 +
 drivers/pci/controller/dwc/pcie-andes-qilai.c | 240 ++++++++++++++++++
 drivers/pci/controller/dwc/pcie-designware.c  |  12 +-
 7 files changed, 461 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
 create mode 100644 drivers/pci/controller/dwc/pcie-andes-qilai.c

-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v8 1/5] PCI: dwc: Allow adjusting the number of ob/ib windows in glue driver

[Randolph Lin]

The number of ob/ib windows is determined through write-read loops
on registers in the core driver. Some glue drivers need to adjust
the number of ob/ib windows to meet specific requirements,such as
hardware limitations. This change allows the glue driver to adjust
the number of ob/ib windows to satisfy platform-specific constraints.
The glue driver may adjust the number of ob/ib windows, but the values
must stay within hardware limits.

Signed-off-by: Randolph Lin <randolph@andestech.com>
---
 drivers/pci/controller/dwc/pcie-designware.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index c644216995f6..a860890febc3 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -851,8 +851,16 @@ void dw_pcie_iatu_detect(struct dw_pcie *pci)
 		max = 0;
 	}
 
-	pci->num_ob_windows = ob;
-	pci->num_ib_windows = ib;
+	if (!pci->num_ob_windows)
+		pci->num_ob_windows = ob;
+	else if (pci->num_ob_windows > ob)
+		dev_err(pci->dev, "Adjusted ob windows exceed the limit\n");
+
+	if (!pci->num_ib_windows)
+		pci->num_ib_windows = ib;
+	else if (pci->num_ib_windows > ib)
+		dev_err(pci->dev, "Adjusted ib windows exceed the limit\n");
+
 	pci->region_align = 1 << fls(min);
 	pci->region_limit = (max << 32) | (SZ_4G - 1);
 
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v8 2/5] dt-bindings: PCI: Add Andes QiLai PCIe support

[Randolph Lin]

Add the Andes QiLai PCIe node, which includes 3 Root Complexes.
Only one example is required in the DTS bindings YAML file.

Signed-off-by: Randolph Lin <randolph@andestech.com>
---
 .../bindings/pci/andestech,qilai-pcie.yaml    | 84 +++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml b/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
new file mode 100644
index 000000000000..ca444e4766ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/andestech,qilai-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andes QiLai PCIe host controller
+
+description:
+  Andes QiLai PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Randolph Lin <randolph@andestech.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: andestech,qilai-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: APB registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: apb
+      - const: config
+
+  ranges:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@80000000 {
+        compatible = "andestech,qilai-pcie";
+        device_type = "pci";
+        reg = <0x0 0x80000000 0x0 0x20000000>,
+              <0x0 0x04000000 0x0 0x00001000>,
+              <0x0 0x00000000 0x0 0x00010000>;
+        reg-names = "dbi", "apb", "config";
+
+        linux,pci-domain = <0>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x02000000 0x00 0x10000000 0x00 0x10000000 0x0 0xf0000000>,
+                 <0x43000000 0x01 0x00000000 0x01 0x0000000 0x1f 0x00000000>;
+
+        #interrupt-cells = <1>;
+        interrupts = <0xf>;
+        interrupt-names = "msi";
+        interrupt-parent = <&plic0>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 2 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 3 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 4 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+...
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v8 2/5] dt-bindings: PCI: Add Andes QiLai PCIe support

[Rob Herring]

On Tue, Oct 14, 2025 at 08:03:46PM +0800, Randolph Lin wrote:
> Add the Andes QiLai PCIe node, which includes 3 Root Complexes.
> Only one example is required in the DTS bindings YAML file.
> 
> Signed-off-by: Randolph Lin <randolph@andestech.com>
> ---
>  .../bindings/pci/andestech,qilai-pcie.yaml    | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml b/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
> new file mode 100644
> index 000000000000..ca444e4766ec
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/andestech,qilai-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Andes QiLai PCIe host controller
> +
> +description:
> +  Andes QiLai PCIe host controller is based on the Synopsys DesignWare
> +  PCI core. It shares common features with the PCIe DesignWare core and
> +  inherits common properties defined in
> +  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.

Drop the 2nd sentence as the schema says the same thing with the $ref.

> +
> +maintainers:
> +  - Randolph Lin <randolph@andestech.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie.yaml#
> +
> +properties:
> +  compatible:
> +    const: andestech,qilai-pcie
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: APB registers.
> +      - description: PCIe configuration space region.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: apb
> +      - const: config
> +
> +  ranges:
> +    maxItems: 2
> +
> +  interrupts:
> +    maxItems: 1

interrupt-names:
  const: msi

> +
> +required:
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      pcie@80000000 {
> +        compatible = "andestech,qilai-pcie";
> +        device_type = "pci";
> +        reg = <0x0 0x80000000 0x0 0x20000000>,
> +              <0x0 0x04000000 0x0 0x00001000>,
> +              <0x0 0x00000000 0x0 0x00010000>;
> +        reg-names = "dbi", "apb", "config";
> +
> +        linux,pci-domain = <0>;
> +        #address-cells = <3>;
> +        #size-cells = <2>;
> +        ranges = <0x02000000 0x00 0x10000000 0x00 0x10000000 0x0 0xf0000000>,
> +                 <0x43000000 0x01 0x00000000 0x01 0x0000000 0x1f 0x00000000>;
> +
> +        #interrupt-cells = <1>;
> +        interrupts = <0xf>;
> +        interrupt-names = "msi";
> +        interrupt-parent = <&plic0>;
> +        interrupt-map-mask = <0 0 0 7>;
> +        interrupt-map = <0 0 0 1 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
> +                        <0 0 0 2 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
> +                        <0 0 0 3 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
> +                        <0 0 0 4 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +    };
> +...
> -- 
> 2.34.1
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v8 3/5] riscv: dts: andes: Add PCIe node into the QiLai SoC

[Randolph Lin]

Add the Andes QiLai PCIe node, which includes 3 Root Complexes.

Signed-off-by: Randolph Lin <randolph@andestech.com>
---
 arch/riscv/boot/dts/andes/qilai.dtsi | 106 +++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)

diff --git a/arch/riscv/boot/dts/andes/qilai.dtsi b/arch/riscv/boot/dts/andes/qilai.dtsi
index de3de32f8c39..afa7b75a7e7a 100644
--- a/arch/riscv/boot/dts/andes/qilai.dtsi
+++ b/arch/riscv/boot/dts/andes/qilai.dtsi
@@ -182,5 +182,111 @@ uart0: serial@30300000 {
 			reg-io-width = <4>;
 			no-loopback-test;
 		};
+
+		bus@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x44 0x00000000 0x04 0x00000000 0x04 0x00000000>;
+			ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x20000000>,
+				 <0x00 0x04000000 0x00 0x04000000 0x00 0x00001000>,
+				 <0x00 0x00000000 0x20 0x00000000 0x20 0x00000000>;
+
+			pcie@80000000 {
+				compatible = "andestech,qilai-pcie";
+				device_type = "pci";
+				reg = <0x00 0x80000000 0x00 0x20000000>, /* DBI registers */
+				      <0x00 0x04000000 0x00 0x00001000>, /* APB registers */
+				      <0x00 0x00000000 0x00 0x00010000>; /* Configuration registers */
+				reg-names = "dbi", "apb", "config";
+
+				linux,pci-domain = <0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x02000000 0x00 0x10000000 0x00 0x10000000 0x00 0xf0000000>,
+					 <0x43000000 0x01 0x00000000 0x01 0x00000000 0x1f 0x00000000>;
+
+				#interrupt-cells = <1>;
+				interrupts = <0xf 0x4>;
+				interrupt-names = "msi";
+				interrupt-parent = <&plic>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 1 &plic 0xf 0x4>,
+						<0 0 0 2 &plic 0xf 0x4>,
+						<0 0 0 3 &plic 0xf 0x4>,
+						<0 0 0 4 &plic 0xf 0x4>;
+			};
+		};
+
+		bus@a0000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x44 0x00000000 0x04 0x00000000 0x04 0x00000000>;
+			ranges = <0x00 0xa0000000 0x00 0xa0000000 0x00 0x20000000>,
+				 <0x00 0x04001000 0x00 0x04001000 0x00 0x00001000>,
+				 <0x00 0x00000000 0x10 0x00000000 0x08 0x00000000>;
+
+			pcie@a0000000 {
+				compatible = "andestech,qilai-pcie";
+				device_type = "pci";
+				reg = <0x00 0xa0000000 0x00 0x20000000>, /* DBI registers */
+				      <0x00 0x04001000 0x00 0x00001000>, /* APB registers */
+				      <0x00 0x00000000 0x00 0x00010000>; /* Configuration registers */
+				reg-names = "dbi", "apb", "config";
+
+				linux,pci-domain = <1>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x02000000 0x00 0x10000000 0x00 0x10000000 0x0 0xf0000000>,
+					 <0x43000000 0x01 0x00000000 0x01 0x00000000 0x7 0x00000000>;
+
+				#interrupt-cells = <1>;
+				interrupts = <0xe 0x4>;
+				interrupt-names = "msi";
+				interrupt-parent = <&plic>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 1 &plic 0xe 0x4>,
+						<0 0 0 2 &plic 0xe 0x4>,
+						<0 0 0 3 &plic 0xe 0x4>,
+						<0 0 0 4 &plic 0xe 0x4>;
+			};
+		};
+
+		bus@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x44 0x00000000 0x04 0x00000000 0x04 0x00000000>;
+			ranges = <0x00 0xc0000000 0x00 0xc0000000 0x00 0x20000000>,
+				 <0x00 0x04002000 0x00 0x04002000 0x00 0x00001000>,
+				 <0x00 0x00000000 0x18 0x00000000 0x08 0x00000000>;
+
+			pcie@c0000000 {
+				compatible = "andestech,qilai-pcie";
+				device_type = "pci";
+				reg = <0x00 0xc0000000 0x00 0x20000000>, /* DBI registers */
+				      <0x00 0x04002000 0x00 0x00001000>, /* APB registers */
+				      <0x00 0x00000000 0x00 0x00010000>; /* Configuration registers */
+				reg-names = "dbi", "apb", "config";
+
+				linux,pci-domain = <2>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x02000000 0x00 0x10000000 0x00 0x10000000 0x0 0xf0000000>,
+					 <0x43000000 0x01 0x00000000 0x01 0x00000000 0x7 0x00000000>;
+
+				#interrupt-cells = <1>;
+				interrupts = <0xd 0x4>;
+				interrupt-names = "msi";
+				interrupt-parent = <&plic>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 1 &plic 0xd 0x4>,
+						<0 0 0 2 &plic 0xd 0x4>,
+						<0 0 0 3 &plic 0xd 0x4>,
+						<0 0 0 4 &plic 0xd 0x4>;
+			};
+		};
+
 	};
 };
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v8 4/5] PCI: andes: Add Andes QiLai SoC PCIe host driver support

[Randolph Lin]

Add driver support for DesignWare based PCIe controller in Andes
QiLai SoC. The driver only supports the Root Complex mode.

Signed-off-by: Randolph Lin <randolph@andestech.com>
---
 drivers/pci/controller/dwc/Kconfig            |  13 +
 drivers/pci/controller/dwc/Makefile           |   1 +
 drivers/pci/controller/dwc/pcie-andes-qilai.c | 240 ++++++++++++++++++
 3 files changed, 254 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-andes-qilai.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 349d4657393c..09ce40640e2f 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -61,6 +61,19 @@ config PCI_MESON
 	  and therefore the driver re-uses the DesignWare core functions to
 	  implement the driver.
 
+config PCIE_ANDES_QILAI
+	tristate "Andes QiLai PCIe controller"
+	depends on ARCH_ANDES || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	help
+	  Say Y here to enable PCIe controller support on Andes QiLai SoCs,
+	  which operate in Root Complex mode. The Andes QiLai SoC PCIe
+	  controller is based on DesignWare IP (5.97a version) and therefore
+	  the driver re-uses the DesignWare core functions to implement the
+	  driver. The Andes QiLai SoC features three Root Complexes, each
+	  operating on PCIe 4.0.
+
 config PCIE_ARTPEC6
 	bool
 
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 7ae28f3b0fb3..5d3ec2d26275 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
 obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
 obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
 obj-$(CONFIG_PCIE_AMD_MDB) += pcie-amd-mdb.o
+obj-$(CONFIG_PCIE_ANDES_QILAI) += pcie-andes-qilai.o
 obj-$(CONFIG_PCIE_BT1) += pcie-bt1.o
 obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
diff --git a/drivers/pci/controller/dwc/pcie-andes-qilai.c b/drivers/pci/controller/dwc/pcie-andes-qilai.c
new file mode 100644
index 000000000000..0b9f9604c0f7
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-andes-qilai.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the PCIe Controller in QiLai from Andes
+ *
+ * Copyright (C) 2025 Andes Technology Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define PCIE_INTR_CONTROL1			0x15c
+#define PCIE_MSI_CTRL_INT_EN			BIT(28)
+
+#define PCIE_LOGIC_COHERENCY_CONTROL3		0x8e8
+
+/*
+ * Refer to Table A4-5 (Memory type encoding) in the
+ * AMBA AXI and ACE Protocol Specification.
+ *
+ * The selected value corresponds to the Memory type field:
+ * "Write-back, Read and Write-allocate".
+ *
+ * The last three rows in the table A4-5 in
+ * AMBA AXI and ACE Protocol Specification:
+ * ARCACHE        AWCACHE        Memory type
+ * ------------------------------------------------------------------
+ * 1111 (0111)    0111           Write-back Read-allocate
+ * 1011           1111 (1011)    Write-back Write-allocate
+ * 1111           1111           Write-back Read and Write-allocate (selected)
+ */
+#define IOCP_ARCACHE				0b1111
+#define IOCP_AWCACHE				0b1111
+
+#define PCIE_CFG_MSTR_ARCACHE_MODE		GENMASK(6, 3)
+#define PCIE_CFG_MSTR_AWCACHE_MODE		GENMASK(14, 11)
+#define PCIE_CFG_MSTR_ARCACHE_VALUE		GENMASK(22, 19)
+#define PCIE_CFG_MSTR_AWCACHE_VALUE		GENMASK(30, 27)
+
+#define PCIE_GEN_CONTROL2			0x54
+#define PCIE_CFG_LTSSM_EN			BIT(0)
+
+#define PCIE_REGS_PCIE_SII_PM_STATE		0xc0
+#define SMLH_LINK_UP				BIT(6)
+#define RDLH_LINK_UP				BIT(7)
+#define PCIE_REGS_PCIE_SII_LINK_UP		(SMLH_LINK_UP | RDLH_LINK_UP)
+
+struct qilai_pcie {
+	struct dw_pcie pci;
+	void __iomem *apb_base;
+};
+
+#define to_qilai_pcie(_pci) container_of(_pci, struct qilai_pcie, pci)
+
+static bool qilai_pcie_link_up(struct dw_pcie *pci)
+{
+	struct qilai_pcie *pcie = to_qilai_pcie(pci);
+	u32 val;
+
+	/* Read smlh & rdlh link up by checking debug port */
+	val = readl(pcie->apb_base + PCIE_REGS_PCIE_SII_PM_STATE);
+
+	return (val & PCIE_REGS_PCIE_SII_LINK_UP) == PCIE_REGS_PCIE_SII_LINK_UP;
+}
+
+static int qilai_pcie_start_link(struct dw_pcie *pci)
+{
+	struct qilai_pcie *pcie = to_qilai_pcie(pci);
+	u32 val;
+
+	val = readl(pcie->apb_base + PCIE_GEN_CONTROL2);
+	val |= PCIE_CFG_LTSSM_EN;
+	writel(val, pcie->apb_base + PCIE_GEN_CONTROL2);
+
+	return 0;
+}
+
+static const struct dw_pcie_ops qilai_pcie_ops = {
+	.link_up = qilai_pcie_link_up,
+	.start_link = qilai_pcie_start_link,
+};
+
+/*
+ * Setup the Qilai PCIe IOCP (IO Coherence Port) Read/Write Behaviors to the
+ * Write-Back, Read and Write Allocate mode.
+ *
+ * The IOCP HW target is SoC last-level cache (L2 Cache), which serves as the
+ * system cache. The IOCP HW helps maintain cache monitoring, ensuring that
+ * the device can snoop data from/to the cache.
+ */
+static void qilai_pcie_iocp_cache_setup(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	u32 val;
+
+	dw_pcie_dbi_ro_wr_en(pci);
+
+	dw_pcie_read(pci->dbi_base + PCIE_LOGIC_COHERENCY_CONTROL3,
+		     sizeof(val), &val);
+	FIELD_MODIFY(PCIE_CFG_MSTR_ARCACHE_MODE, &val, IOCP_ARCACHE);
+	FIELD_MODIFY(PCIE_CFG_MSTR_AWCACHE_MODE, &val, IOCP_AWCACHE);
+	FIELD_MODIFY(PCIE_CFG_MSTR_ARCACHE_VALUE, &val, IOCP_ARCACHE);
+	FIELD_MODIFY(PCIE_CFG_MSTR_AWCACHE_VALUE, &val, IOCP_AWCACHE);
+	dw_pcie_write(pci->dbi_base + PCIE_LOGIC_COHERENCY_CONTROL3,
+		      sizeof(val), val);
+
+	dw_pcie_dbi_ro_wr_dis(pci);
+}
+
+static void qilai_pcie_enable_msi(struct qilai_pcie *pcie)
+{
+	u32 val;
+
+	val = readl(pcie->apb_base + PCIE_INTR_CONTROL1);
+	val |= PCIE_MSI_CTRL_INT_EN;
+	writel(val, pcie->apb_base + PCIE_INTR_CONTROL1);
+}
+
+/*
+ * The QiLai SoC PCIe controller's outbound iATU region supports
+ * a maximum size of SZ_4G - 1. To prevent programming failures,
+ * only consider bridge->windows with sizes within this limit.
+ *
+ * To ensure compatibility with most endpoint devices, at least
+ * one memory region must be mapped within the 32-bits address space.
+ */
+static int qilai_pcie_host_fix_ob_iatu_count(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct device *dev = pci->dev;
+	struct resource_entry *entry;
+	/* Reserved 1 ob iATU for config space */
+	int count = 1;
+	bool ranges_32bits = false;
+	u64 pci_addr;
+	u64 size;
+
+	resource_list_for_each_entry(entry, &pp->bridge->windows) {
+		if (resource_type(entry->res) != IORESOURCE_MEM)
+			continue;
+
+		size = resource_size(entry->res);
+		if (size < SZ_4G)
+			count++;
+
+		pci_addr = entry->res->start - entry->offset;
+		if (pci_addr < SZ_4G)
+			ranges_32bits = true;
+	}
+
+	if (!ranges_32bits) {
+		dev_err(dev, "Bridge window must contain 32-bits address\n");
+		return -EINVAL;
+	}
+
+	pci->num_ob_windows = count;
+
+	return 0;
+}
+
+static int qilai_pcie_host_init(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct qilai_pcie *pcie = to_qilai_pcie(pci);
+
+	qilai_pcie_enable_msi(pcie);
+
+	return qilai_pcie_host_fix_ob_iatu_count(pp);
+}
+
+static void qilai_pcie_host_post_init(struct dw_pcie_rp *pp)
+{
+	qilai_pcie_iocp_cache_setup(pp);
+}
+
+static const struct dw_pcie_host_ops qilai_pcie_host_ops = {
+	.init = qilai_pcie_host_init,
+	.post_init = qilai_pcie_host_post_init,
+};
+
+static int qilai_pcie_probe(struct platform_device *pdev)
+{
+	struct qilai_pcie *pcie;
+	struct dw_pcie *pci;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pcie);
+
+	pci = &pcie->pci;
+	pcie->pci.dev = dev;
+	pcie->pci.ops = &qilai_pcie_ops;
+	pcie->pci.pp.ops = &qilai_pcie_host_ops;
+	pci->use_parent_dt_ranges = true;
+
+	dw_pcie_cap_set(&pcie->pci, REQ_RES);
+
+	pcie->apb_base = devm_platform_ioremap_resource_byname(pdev, "apb");
+	if (IS_ERR(pcie->apb_base))
+		return PTR_ERR(pcie->apb_base);
+
+	ret = dw_pcie_host_init(&pcie->pci.pp);
+	if (ret) {
+		dev_err_probe(dev, ret, "Failed to initialize PCIe host\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id qilai_pcie_of_match[] = {
+	{ .compatible = "andestech,qilai-pcie" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, qilai_pcie_of_match);
+
+static struct platform_driver qilai_pcie_driver = {
+	.probe = qilai_pcie_probe,
+	.driver = {
+		.name	= "qilai-pcie",
+		.of_match_table = qilai_pcie_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+builtin_platform_driver(qilai_pcie_driver);
+
+MODULE_AUTHOR("Randolph Lin <randolph@andestech.com>");
+MODULE_DESCRIPTION("Andes Qilai PCIe driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v8 4/5] PCI: andes: Add Andes QiLai SoC PCIe host driver support

[Bjorn Helgaas]

On Tue, Oct 14, 2025 at 08:03:48PM +0800, Randolph Lin wrote:
> Add driver support for DesignWare based PCIe controller in Andes
> QiLai SoC. The driver only supports the Root Complex mode.

> + * Setup the Qilai PCIe IOCP (IO Coherence Port) Read/Write Behaviors to the
> + * Write-Back, Read and Write Allocate mode.

s/Setup/Set up/
s/Qilai/QiLai/

> + * The QiLai SoC PCIe controller's outbound iATU region supports
> + * a maximum size of SZ_4G - 1. To prevent programming failures,
> + * only consider bridge->windows with sizes within this limit.
> + *
> + * To ensure compatibility with most endpoint devices, at least
> + * one memory region must be mapped within the 32-bits address space.
> + */
> +static int qilai_pcie_host_fix_ob_iatu_count(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct device *dev = pci->dev;
> +	struct resource_entry *entry;
> +	/* Reserved 1 ob iATU for config space */
> +	int count = 1;
> +	bool ranges_32bits = false;
> +	u64 pci_addr;
> +	u64 size;
> +
> +	resource_list_for_each_entry(entry, &pp->bridge->windows) {
> +		if (resource_type(entry->res) != IORESOURCE_MEM)
> +			continue;
> +
> +		size = resource_size(entry->res);
> +		if (size < SZ_4G)
> +			count++;
> +
> +		pci_addr = entry->res->start - entry->offset;
> +		if (pci_addr < SZ_4G)
> +			ranges_32bits = true;
> +	}
> +
> +	if (!ranges_32bits) {
> +		dev_err(dev, "Bridge window must contain 32-bits address\n");
> +		return -EINVAL;

Is this really a PCI host controller driver probe failure?  I assume
there are devices that only have 64-bit BARs and could work fine
without a 32-bit window?

If a device requires a 32-bit BAR, and the PCI core can't assign such
an address, and gracefully decline to enable a device where we
couldn't assign the BAR, I think that would be preferable and would
identify the specific device that doesn't work.

> +	}
> +
> +	pci->num_ob_windows = count;
> +
> +	return 0;
> +}


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v8 4/5] PCI: andes: Add Andes QiLai SoC PCIe host driver support

[Randolph Lin]

Hello Bjorn,
On Tue, Oct 21, 2025 at 12:05:16PM -0500, Bjorn Helgaas wrote:
> [EXTERNAL MAIL]
> 
> On Tue, Oct 14, 2025 at 08:03:48PM +0800, Randolph Lin wrote:
> > Add driver support for DesignWare based PCIe controller in Andes
> > QiLai SoC. The driver only supports the Root Complex mode.
> 
> > + * Setup the Qilai PCIe IOCP (IO Coherence Port) Read/Write Behaviors to the
> > + * Write-Back, Read and Write Allocate mode.
> 
> s/Setup/Set up/
> s/Qilai/QiLai/
> 

ok

> > + * The QiLai SoC PCIe controller's outbound iATU region supports
> > + * a maximum size of SZ_4G - 1. To prevent programming failures,
> > + * only consider bridge->windows with sizes within this limit.
> > + *
> > + * To ensure compatibility with most endpoint devices, at least
> > + * one memory region must be mapped within the 32-bits address space.
> > + */
> > +static int qilai_pcie_host_fix_ob_iatu_count(struct dw_pcie_rp *pp)
> > +{
> > +     struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +     struct device *dev = pci->dev;
> > +     struct resource_entry *entry;
> > +     /* Reserved 1 ob iATU for config space */
> > +     int count = 1;
> > +     bool ranges_32bits = false;
> > +     u64 pci_addr;
> > +     u64 size;
> > +
> > +     resource_list_for_each_entry(entry, &pp->bridge->windows) {
> > +             if (resource_type(entry->res) != IORESOURCE_MEM)
> > +                     continue;
> > +
> > +             size = resource_size(entry->res);
> > +             if (size < SZ_4G)
> > +                     count++;
> > +
> > +             pci_addr = entry->res->start - entry->offset;
> > +             if (pci_addr < SZ_4G)
> > +                     ranges_32bits = true;
> > +     }
> > +
> > +     if (!ranges_32bits) {
> > +             dev_err(dev, "Bridge window must contain 32-bits address\n");
> > +             return -EINVAL;
> 
> Is this really a PCI host controller driver probe failure?  I assume
> there are devices that only have 64-bit BARs and could work fine
> without a 32-bit window?
> 
> If a device requires a 32-bit BAR, and the PCI core can't assign such
> an address, and gracefully decline to enable a device where we
> couldn't assign the BAR, I think that would be preferable and would
> identify the specific device that doesn't work.
>

I have a clear understanding of the meaning behind this.
However, based on reviewer Niklas's suggestion, I have decided to use patch [1].
As a result, the function that adjusts the number of ib/ob window is no longer needed.

[1]: https://lore.kernel.org/linux-pci/aPDObXsvMoz1OYso@ryzen/T/#m11c3d95215982411d0bbd36940e70122b70ae820

> > +     }
> > +
> > +     pci->num_ob_windows = count;
> > +
> > +     return 0;
> > +}
> 
Sincerely,
Randolph Lin

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v8 5/5] MAINTAINERS: Add maintainers for Andes QiLai PCIe driver

[Randolph Lin]

Here add maintainer information for Andes QiLai PCIe driver.

Signed-off-by: Randolph Lin <randolph@andestech.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 46126ce2f968..fb1d4daafe44 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19591,6 +19591,13 @@ S:	Supported
 F:	Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml
 F:	drivers/pci/controller/pcie-altera.c
 
+PCI DRIVER FOR ANDES QILAI PCIE
+M:	Randolph Lin <randolph@andestech.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
+F:	drivers/pci/controller/dwc/pcie-andes-qilai.c
+
 PCI DRIVER FOR APPLIEDMICRO XGENE
 M:	Toan Le <toan@os.amperecomputing.com>
 L:	linux-pci@vger.kernel.org
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv