Re: [PATCH bpf-next v2 0/3] bpf, riscv: use BPF prog pack allocator in BPF JIT

[Pu Lehui <pulehui@huawei.com>]

On 2023/8/24 21:31, Puranjay Mohan wrote:
> Changes in v1 -> v2:
> 1. Implement a new function patch_text_set_nosync() to be used in bpf_arch_text_invalidate().
>     The implementation in v1 called patch_text_nosync() in a loop and it was bad as it would
>     call flush_icache_range() for every word making it really slow. This was found by running
>     the test_tag selftest which would take forever to complete.
> 
> Here is some data to prove the V2 fixes the problem:
> 
> Without this series:
> root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
> test_tag: OK (40945 tests)
> 
> real    7m47.562s
> user    0m24.145s
> sys     6m37.064s
> 
> With this series applied:
> root@rv-selftester:~/src/selftest/bpf# time ./test_tag
> test_tag: OK (40945 tests)
> 
> real    7m29.472s
> user    0m25.865s
> sys     6m18.401s
> 
> BPF programs currently consume a page each on RISCV. For systems with many BPF
> programs, this adds significant pressure to instruction TLB. High iTLB pressure
> usually causes slow down for the whole system.
> 
> Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
> It packs multiple BPF programs into a single huge page. It is currently only
> enabled for the x86_64 BPF JIT.
> 
> I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.
> 
> This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.
> This series needs a patch[3] from the ARM64 series to work.

Is there a new version for arm64 currently? Maybe we could submit this 
patch first as a separate patch to avoid dependencies.

> 
> ======================================================
> Performance Analysis of prog pack allocator on RISCV64
> ======================================================
> 
> Test setup:
> ===========
> 
> Host machine: Debian GNU/Linux 11 (bullseye)
> Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
> u-boot-qemu Version: 2023.07+dfsg-1
> opensbi Version: 1.3-1
> 
> To test the performance of the BPF prog pack allocator on RV, a stresser
> tool[4] linked below was built. This tool loads 8 BPF programs on the system and
> triggers 5 of them in an infinite loop by doing system calls.
> 
> The runner script starts 20 instances of the above which loads 8*20=160 BPF
> programs on the system, 5*20=100 of which are being constantly triggered.
> The script is passed a command which would be run in the above environment.
> 
> The script was run with following perf command:
> ./run.sh "perf stat -a \
>          -e iTLB-load-misses \
>          -e dTLB-load-misses  \
>          -e dTLB-store-misses \
>          -e instructions \
>          --timeout 60000"
> 
> The output of the above command is discussed below before and after enabling the
> BPF prog pack allocator.
> 
> The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
> was created using Bjorn's riscv-cross-builder[5] docker container linked below.
> 
> Results
> =======
> 
> Before enabling prog pack allocator:
> ------------------------------------
> 
> Performance counter stats for 'system wide':
> 
>             4939048      iTLB-load-misses
>             5468689      dTLB-load-misses
>              465234      dTLB-store-misses
>       1441082097998      instructions
> 
>        60.045791200 seconds time elapsed
> 
> After enabling prog pack allocator:
> -----------------------------------
> 
> Performance counter stats for 'system wide':
> 
>             3430035      iTLB-load-misses
>             5008745      dTLB-load-misses
>              409944      dTLB-store-misses
>       1441535637988      instructions
> 
>        60.046296600 seconds time elapsed
> 
> Improvements in metrics
> =======================
> 
> It was expected that the iTLB-load-misses would decrease as now a single huge
> page is used to keep all the BPF programs compared to a single page for each
> program earlier.
> 
> --------------------------------------------
> The improvement in iTLB-load-misses: -30.5 %
> --------------------------------------------
> 
> I repeated this expriment more than 100 times in different setups and the
> improvement was always greater than 30%.
> 
> This patch series is boot tested on the Starfive VisionFive 2 board[6].
> The performance analysis was not done on the board because it doesn't
> expose iTLB-load-misses, etc. The stresser program was run on the board to test
> the loading and unloading of BPF programs
> 
> [1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
> [2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
> [3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
> [4] https://github.com/puranjaymohan/BPF-Allocator-Bench
> [5] https://github.com/bjoto/riscv-cross-builder
> [6] https://www.starfivetech.com/en/site/boards
> 
> Puranjay Mohan (3):
>    riscv: extend patch_text_nosync() for multiple pages
>    riscv: implement a memset like function for text
>    bpf, riscv: use prog pack allocator in the BPF JIT
> 
>   arch/riscv/include/asm/patch.h  |   1 +
>   arch/riscv/kernel/patch.c       | 113 ++++++++++++++++++++++++++++++--
>   arch/riscv/net/bpf_jit.h        |   3 +
>   arch/riscv/net/bpf_jit_comp64.c |  56 +++++++++++++---
>   arch/riscv/net/bpf_jit_core.c   | 113 +++++++++++++++++++++++++++-----
>   5 files changed, 255 insertions(+), 31 deletions(-)
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv