[PATCH v5 0/2] perf: riscv: Preliminary Perf Event Support on RISC-V

[atish.patra@wdc.com (Atish Patra)]

On 4/19/18 4:28 PM, Alan Kao wrote:
> This implements the baseline PMU for RISC-V platforms.
> 
> To ease future PMU portings, a guide is also written, containing
> perf concepts, arch porting practices and some hints.
> 
> Changes in v5:
>   - Fix patch errors from checkpatch.pl.
> 
> Changes in v4:
>   - Fix several compilation errors.  Sorry for that.
>   - Raise a warning in the write_counter body.
> 
> Changes in v3:
>   - Fix typos in the document.
>   - Change the initialization routine from statically assigning PMU to
>     device-tree-based methods, and set default to the PMU proposed in
>     this patch.
> 
> Changes in v2:
>   - Fix the bug reported by Alex, which was caused by not sufficient
>     initialization.  Check https://lkml.org/lkml/2018/3/31/251 for the
>     discussion.
> 
> Alan Kao (2):
>    perf: riscv: preliminary RISC-V support
>    perf: riscv: Add Document for Future Porting Guide
> 
>   Documentation/riscv/pmu.txt         | 249 ++++++++++++++
>   arch/riscv/Kconfig                  |  13 +
>   arch/riscv/include/asm/perf_event.h |  79 ++++-
>   arch/riscv/kernel/Makefile          |   1 +
>   arch/riscv/kernel/perf_event.c      | 485 ++++++++++++++++++++++++++++
>   5 files changed, 823 insertions(+), 4 deletions(-)
>   create mode 100644 Documentation/riscv/pmu.txt
>   create mode 100644 arch/riscv/kernel/perf_event.c
> 
Most of the perf tests either pass or fail because of unsupported 
event/trace point which is fine.

However, I got an rcu-stall for the test "47: Event times".
# ./perf test -v 47
47: Event times                                :
--- start ---
test child forked, pid 2774
attaching to spawned child, enable on exec
    OK    : ena 2243000, run 2243000
attaching to current thread as enabled
    OK    : ena 19000, run 19000
attaching to current thread as disabled
    OK    : ena 5000, run 5000
attaching to CPU 0 as enabled
[ 1001.466578] INFO: rcu_sched self-detected stall on CPU
[ 1001.470947]  4-....: (29999 ticks this GP) idle=5fa/140000000000001/0 
softirq=19762/19762 fqs=14602
[ 1001.480053]   (t=30001 jiffies g=3471 c=3470 q=125)
[ 1001.484917] Task dump for CPU 4:
[ 1001.488129] perf            R  running task        0  2774   2773 
0x00000008
[ 1001.495161] Call Trace:
[ 1001.497606] [<000000006a3d4f87>] walk_stackframe+0x0/0xc0
[ 1001.502980] [<000000004b4b0780>] show_stack+0x3c/0x46
[ 1001.508024] [<0000000060c96ab8>] sched_show_task+0xd0/0x122
[ 1001.513573] [<000000007d8bd54e>] dump_cpu_task+0x50/0x5a
[ 1001.518870] [<0000000053990e11>] rcu_dump_cpu_stacks+0x98/0xd2
[ 1001.524685] [<00000000fe94c593>] rcu_check_callbacks+0x614/0x822
[ 1001.530680] [<0000000057688dd3>] update_process_times+0x38/0x6a
[ 1001.536585] [<0000000063a96de0>] tick_periodic+0x58/0xd8
[ 1001.541876] [<0000000013d712f1>] tick_handle_periodic+0x2e/0x7c
[ 1001.547780] [<000000009e2ef428>] riscv_timer_interrupt+0x34/0x3c
[ 1001.553774] [<00000000ff6b1f18>] riscv_intc_irq+0xbc/0xe0
[ 1001.559153] [<00000000c8614c3b>] ret_from_exception+0x0/0xc

It is quite possible that we don't support some dependency 
infrastructure. I am looking into it.

Regards,
Atish