From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To: Conor Dooley <conor@kernel.org>
Cc: linux-riscv@lists.infradead.org,
Palmer Dabbelt <palmer@dabbelt.com>,
Vlastimil Babka <vbabka@suse.cz>,
Conor Dooley <Conor.Dooley@microchip.com>
Subject: Re: [PATCH] riscv: Update k210 defconfigs
Date: Tue, 15 Nov 2022 05:58:11 +0900 [thread overview]
Message-ID: <ce2a2873-c031-228d-e21f-e9918660e4b3@opensource.wdc.com> (raw)
In-Reply-To: <Y3Kffxz33QV1Vvii@spud>
On 11/15/22 05:05, Conor Dooley wrote:
> On Mon, Nov 14, 2022 at 10:31:51AM +0900, Damien Le Moal wrote:
>> In preparation for SLOB deprecation, update the nommu_k210_* defconfigs
>> to switch to using SLUB. To save memory, CONFIG_SLUB_CPU_PARTIAL is not
>> selected.
>>
>> Suggested-by: Vlastimil Babka <vbabka@suse.cz>
>> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
>
> Hey,
> Gave it a go w/ your v21 branch. To me, seems about as usable as it was
> before...
Please use upstream buildroot. Everything is in master for this board and
that v21 branch is dead now.
> Tested-by: Conor Dooley <conor.dooley@microchip.com>
I used buildroot defconfigs sipeed_maix_bit_defconfig and
sipeed_maix_bit_sd_card_defconfig. Both had the same issue with SLUB: lots
of errors with the shell, including failures for the init shell commands.
And sometimes I end up with a prompt but no way to run any shell command
at all. I guess that depends on fragmentation of the memory after boot
completes.
>
> btw, what's the craic with that? Looks like you actually landed in
> upstream buildroot fairly soon after you pointed me at your series.
> Anything missing from buildroot, or did it all land?
Everything landed, plus some (some build fixes).
Palmer,
Please hold on before applying this patch. Discussion still going on about
SLUB.
>
> Thanks,
> Conor.
>
>> ---
>> arch/riscv/configs/nommu_k210_defconfig | 6 +++---
>> arch/riscv/configs/nommu_k210_sdcard_defconfig | 6 +++---
>> 2 files changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig
>> index 96fe8def644c..18de91e84d1c 100644
>> --- a/arch/riscv/configs/nommu_k210_defconfig
>> +++ b/arch/riscv/configs/nommu_k210_defconfig
>> @@ -23,9 +23,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
>> # CONFIG_ADVISE_SYSCALLS is not set
>> # CONFIG_KALLSYMS is not set
>> CONFIG_EMBEDDED=y
>> -# CONFIG_VM_EVENT_COUNTERS is not set
>> -# CONFIG_COMPAT_BRK is not set
>> -CONFIG_SLOB=y
>> # CONFIG_MMU is not set
>> CONFIG_SOC_CANAAN=y
>> CONFIG_NONPORTABLE=y
>> @@ -39,6 +36,9 @@ CONFIG_CMDLINE_FORCE=y
>> # CONFIG_BLOCK is not set
>> CONFIG_BINFMT_FLAT=y
>> # CONFIG_COREDUMP is not set
>> +# CONFIG_SLUB_CPU_PARTIAL is not set
>> +# CONFIG_COMPAT_BRK is not set
>> +# CONFIG_VM_EVENT_COUNTERS is not set
>> CONFIG_DEVTMPFS=y
>> CONFIG_DEVTMPFS_MOUNT=y
>> # CONFIG_FW_LOADER is not set
>> diff --git a/arch/riscv/configs/nommu_k210_sdcard_defconfig b/arch/riscv/configs/nommu_k210_sdcard_defconfig
>> index 379740654373..718d2729a03e 100644
>> --- a/arch/riscv/configs/nommu_k210_sdcard_defconfig
>> +++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig
>> @@ -15,9 +15,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
>> # CONFIG_ADVISE_SYSCALLS is not set
>> # CONFIG_KALLSYMS is not set
>> CONFIG_EMBEDDED=y
>> -# CONFIG_VM_EVENT_COUNTERS is not set
>> -# CONFIG_COMPAT_BRK is not set
>> -CONFIG_SLOB=y
>> # CONFIG_MMU is not set
>> CONFIG_SOC_CANAAN=y
>> CONFIG_NONPORTABLE=y
>> @@ -32,6 +29,9 @@ CONFIG_CMDLINE_FORCE=y
>> # CONFIG_MQ_IOSCHED_KYBER is not set
>> CONFIG_BINFMT_FLAT=y
>> # CONFIG_COREDUMP is not set
>> +# CONFIG_SLUB_CPU_PARTIAL is not set
>> +# CONFIG_COMPAT_BRK is not set
>> +# CONFIG_VM_EVENT_COUNTERS is not set
>> CONFIG_DEVTMPFS=y
>> CONFIG_DEVTMPFS_MOUNT=y
>> # CONFIG_FW_LOADER is not set
>> --
>> 2.38.1
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
--
Damien Le Moal
Western Digital Research
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-11-14 20:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-14 1:31 [PATCH] riscv: Update k210 defconfigs Damien Le Moal
2022-11-14 20:05 ` Conor Dooley
2022-11-14 20:58 ` Damien Le Moal [this message]
2022-11-14 21:05 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ce2a2873-c031-228d-e21f-e9918660e4b3@opensource.wdc.com \
--to=damien.lemoal@opensource.wdc.com \
--cc=Conor.Dooley@microchip.com \
--cc=conor@kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox