Re: [PATCH v5 2/2] riscv: dts: sophgo: add initial Milk-V Duo S board support

From: Michael Opdenacker <michael.opdenacker@bootlin.com>
To: Inochi Amaoto <inochiama@outlook.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chen Wang <unicorn_wang@outlook.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: michael.opdenacker@bootlin.com, devicetree@vger.kernel.org,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 2/2] riscv: dts: sophgo: add initial Milk-V Duo S board support
Date: Sun, 21 Apr 2024 07:57:01 +0200	[thread overview]
Message-ID: <e457d5f6-3289-4049-b663-2ebcfe78dce4@bootlin.com> (raw)
In-Reply-To: <IA1PR20MB49539A380E44459ACE19DEB6BB0F2@IA1PR20MB4953.namprd20.prod.outlook.com>

Hi Inochi

Thanks for your advice!

On 4/17/24 at 11:34, Inochi Amaoto wrote:
> On Wed, Apr 17, 2024 at 08:53:11AM GMT, michael.opdenacker@bootlin.com wrote:
>> From: Michael Opdenacker <michael.opdenacker@bootlin.com>
>>
>> This adds initial support for the Milk-V Duo S board
>> (https://milkv.io/duo-s), enabling the serial port,
>> making it possible to boot Linux to the command line.
>>
>> Link: https://lore.kernel.org/linux-riscv/171266958507.1032617.9460749136730849811.robh@kernel.org/T/#t
>>
>> Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
>> ---
>>   arch/riscv/boot/dts/sophgo/Makefile           |  1 +
>>   .../boot/dts/sophgo/sg2000-milkv-duos.dts     | 34 +++++++++++++++++++
>>   2 files changed, 35 insertions(+)
>>   create mode 100644 arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
>>
>> diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile
>> index 57ad82a61ea6..e008acb5240f 100644
>> --- a/arch/riscv/boot/dts/sophgo/Makefile
>> +++ b/arch/riscv/boot/dts/sophgo/Makefile
>> @@ -1,4 +1,5 @@
>>   # SPDX-License-Identifier: GPL-2.0
>>   dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
>>   dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
>> +dtb-$(CONFIG_ARCH_SOPHGO) += sg2000-milkv-duos.dtb
>>   dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
>> diff --git a/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
>> new file mode 100644
>> index 000000000000..c1ecf97d5e93
>> --- /dev/null
>> +++ b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
>> @@ -0,0 +1,34 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * Copyright (C) 2024 Michael Opdenacker <michael.opdenacker@bootlin.com>
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "cv1812h.dtsi"
>> +
>> +/ {
>> +	model = "Milk-V Duo S";
>> +	compatible = "milkv,duos", "sophgo,cv1812h";
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	memory@80000000 {
>> +		device_type = "memory";
>> +		reg = <0x80000000 0x20000000>;
>> +	};
> Add a cpu specific file, and move this to it.

Now that I'm including "cv1812h.dtsi", which has the same structure, all 
I need is to change the reg setting to have 512 MB of RAM instead of 
256MB, right? See the V6 I'm sending soon.

>
>> +};
>> +
>> +&osc {
>> +	clock-frequency = <25000000>;
>> +};
>> +
>> +&uart0 {
>> +	status = "okay";
>> +};
>> -- 
>> 2.34.1
>>
> Add necessary DT node in the cpu specific file. (clint,
> plic and clk). You also need to rebase your patch based
> on sophgo/for-next.

Same here, cv1812h.dtsi already configures &clint, &plic and &clk, so it 
seems to me I don't need to make changes again here. At least the board 
boots fine for me as it is.
Cheers
Michael.

-- 

Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv