[PATCH 0/4] Add support for es8388 on the rock2

Romain Perier
2017-01-13T16:14:48Z

This set of patches adds a machine driver for rockchip boards that use
ES8388 codecs. It also adds slave mode to the es8328 driver that
currently only supported the master mode. Then, it adds the required DT
definitions to link rockchip-i2s to the es8388 analog output.

This work is based on the initial work that was done by Sjoerd Simons
<sjoerd.simons@collabora.co.uk> with some improvements, changes and more
commits.

Romain Perier (4):
ASoC: es8328-i2c: Add compatible for ES8388
ASoC: es8328: Add support for slave mode
ASoC: rockchip: Add machine driver for ES8388 codecs
arm: dts: Add support for ES8388 to the Radxa Rock 2

Documentation/devicetree/bindings/sound/es8328.txt | 2 +-
.../devicetree/bindings/sound/rockchip-es8388.txt | 28 +++
arch/arm/boot/dts/rk3288-rock2-square.dts | 37 +++
sound/soc/codecs/es8328-i2c.c | 3 +-
sound/soc/codecs/es8328.c | 28 ++-
sound/soc/rockchip/Kconfig | 9 +
sound/soc/rockchip/Makefile | 2 +
sound/soc/rockchip/rockchip_es8388.c | 270 +++++++++++++++++++++
8 files changed, 371 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/rockchip-es8388.txt
create mode 100644 sound/soc/rockchip/rockchip_es8388.c

--
2.9.3