From: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
To: John Youn <John.Youn-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>,
balbi-l0cyMroinI0@public.gmane.org
Cc: gregory.herrero-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
"Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Douglas Anderson"
<dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
yousaf.kaukab-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
"Yunzhi Li" <lyz-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
"Julius Werner" <jwerner-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org
Subject: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them
Date: Tue, 3 Nov 2015 12:30:29 -0800 [thread overview]
Message-ID: <1446582629-30091-2-git-send-email-dianders@chromium.org> (raw)
In-Reply-To: <1446582629-30091-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
In general it is wise to clear interrupts before processing them. If
you don't do that, you can get:
1. Interrupt happens
2. You look at system state and process interrupt
3. A new interrupt happens
4. You clear interrupt without processing it.
This patch was actually a first attempt to fix missing device insertions
as described in (usb: dwc2: host: Fix missing device insertions) and it
did solve some of the signal bouncing problems but not all of
them (which is why I submitted the other patch). Specifically, this
patch itself would sometimes change:
1. hardware sees connect
2. hardware sees disconnect
3. hardware sees connect
4. dwc2_port_intr() - clears connect interrupt
5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect()
...to:
1. hardware sees connect
2. hardware sees disconnect
3. dwc2_port_intr() - clears connect interrupt
4. hardware sees connect
5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect()
...but with different timing then sometimes we'd still miss cable
insertions.
In any case, though this patch doesn't fix any (known) problems, it
still seems wise as a general policy to clear interrupt before handling
them.
Signed-off-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
Changes in v2: None
drivers/usb/dwc2/core_intr.c | 55 ++++++++++++++++++++++----------------------
drivers/usb/dwc2/hcd_intr.c | 16 ++++++-------
2 files changed, 35 insertions(+), 36 deletions(-)
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 61601d16e233..2a166b7eec41 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -80,15 +80,16 @@ static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
*/
static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
{
- u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
+ u32 hprt0;
+ /* Clear interrupt */
+ dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
+
+ hprt0 = dwc2_readl(hsotg->regs + HPRT0);
if (hprt0 & HPRT0_ENACHG) {
hprt0 &= ~HPRT0_ENA;
dwc2_writel(hprt0, hsotg->regs + HPRT0);
}
-
- /* Clear interrupt */
- dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
}
/**
@@ -98,11 +99,11 @@ static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
*/
static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
{
- dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
- dwc2_is_host_mode(hsotg) ? "Host" : "Device");
-
/* Clear interrupt */
dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
+
+ dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
+ dwc2_is_host_mode(hsotg) ? "Host" : "Device");
}
/**
@@ -276,9 +277,13 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
*/
static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
{
- u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
+ u32 gintmsk;
+
+ /* Clear interrupt */
+ dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
/* Need to disable SOF interrupt immediately */
+ gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
gintmsk &= ~GINTSTS_SOF;
dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
@@ -295,9 +300,6 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
queue_work(hsotg->wq_otg, &hsotg->wf_otg);
spin_lock(&hsotg->lock);
}
-
- /* Clear interrupt */
- dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
}
/**
@@ -315,12 +317,12 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
{
int ret;
- dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
- hsotg->lx_state);
-
/* Clear interrupt */
dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
+ dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
+ hsotg->lx_state);
+
if (dwc2_is_device_mode(hsotg)) {
if (hsotg->lx_state == DWC2_L2) {
ret = dwc2_exit_hibernation(hsotg, true);
@@ -347,6 +349,10 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
{
int ret;
+
+ /* Clear interrupt */
+ dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
+
dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
@@ -368,10 +374,9 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
/* Change to L0 state */
hsotg->lx_state = DWC2_L0;
} else {
- if (hsotg->core_params->hibernation) {
- dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
+ if (hsotg->core_params->hibernation)
return;
- }
+
if (hsotg->lx_state != DWC2_L1) {
u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
@@ -385,9 +390,6 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
hsotg->lx_state = DWC2_L0;
}
}
-
- /* Clear interrupt */
- dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
}
/*
@@ -396,14 +398,14 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
*/
static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
{
+ dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
+
dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
dwc2_is_host_mode(hsotg) ? "Host" : "Device",
dwc2_op_state_str(hsotg));
if (hsotg->op_state == OTG_STATE_A_HOST)
dwc2_hcd_disconnect(hsotg, false);
-
- dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
}
/*
@@ -419,6 +421,9 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
u32 dsts;
int ret;
+ /* Clear interrupt */
+ dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
+
dev_dbg(hsotg->dev, "USB SUSPEND\n");
if (dwc2_is_device_mode(hsotg)) {
@@ -437,7 +442,7 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
if (!dwc2_is_device_connected(hsotg)) {
dev_dbg(hsotg->dev,
"ignore suspend request before enumeration\n");
- goto clear_int;
+ return;
}
ret = dwc2_enter_hibernation(hsotg);
@@ -476,10 +481,6 @@ skip_power_saving:
hsotg->op_state = OTG_STATE_A_HOST;
}
}
-
-clear_int:
- /* Clear interrupt */
- dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
}
#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 03504ac2fecc..4c7f709b8182 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -122,6 +122,9 @@ static void dwc2_sof_intr(struct dwc2_hsotg *hsotg)
struct dwc2_qh *qh;
enum dwc2_transaction_type tr_type;
+ /* Clear interrupt */
+ dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
+
#ifdef DEBUG_SOF
dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n");
#endif
@@ -146,9 +149,6 @@ static void dwc2_sof_intr(struct dwc2_hsotg *hsotg)
tr_type = dwc2_hcd_select_transactions(hsotg);
if (tr_type != DWC2_TRANSACTION_NONE)
dwc2_hcd_queue_transactions(hsotg, tr_type);
-
- /* Clear interrupt */
- dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
}
/*
@@ -347,11 +347,12 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
* Set flag and clear if detected
*/
if (hprt0 & HPRT0_CONNDET) {
+ writel(hprt0_modify | HPRT0_CONNDET, hsotg->regs + HPRT0);
+
dev_vdbg(hsotg->dev,
"--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n",
hprt0);
dwc2_hcd_connect(hsotg);
- hprt0_modify |= HPRT0_CONNDET;
/*
* The Hub driver asserts a reset when it sees port connect
@@ -364,10 +365,10 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
* Clear if detected - Set internal flag if disabled
*/
if (hprt0 & HPRT0_ENACHG) {
+ writel(hprt0_modify | HPRT0_ENACHG, hsotg->regs + HPRT0);
dev_vdbg(hsotg->dev,
" --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n",
hprt0, !!(hprt0 & HPRT0_ENA));
- hprt0_modify |= HPRT0_ENACHG;
if (hprt0 & HPRT0_ENA)
dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify);
else
@@ -376,15 +377,12 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
/* Overcurrent Change Interrupt */
if (hprt0 & HPRT0_OVRCURRCHG) {
+ writel(hprt0_modify | HPRT0_OVRCURRCHG, hsotg->regs + HPRT0);
dev_vdbg(hsotg->dev,
" --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n",
hprt0);
hsotg->flags.b.port_over_current_change = 1;
- hprt0_modify |= HPRT0_OVRCURRCHG;
}
-
- /* Clear Port Interrupts */
- dwc2_writel(hprt0_modify, hsotg->regs + HPRT0);
}
/*
--
2.6.0.rc2.230.g3dd15c0
next prev parent reply other threads:[~2015-11-03 20:30 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-03 20:30 [PATCH v2 1/2] usb: dwc2: host: Fix missing device insertions Douglas Anderson
[not found] ` <1446582629-30091-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2015-11-03 20:30 ` Douglas Anderson [this message]
2015-11-05 3:08 ` [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them John Youn
[not found] ` <1446582629-30091-2-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2015-11-16 16:28 ` Felipe Balbi
[not found] ` <87wpthnc2e.fsf-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-11-16 17:22 ` Doug Anderson
2015-11-19 1:43 ` John Youn
[not found] ` <2B3535C5ECE8B5419E3ECBE30077290901DC3D696B-Yu2iAY70zvrYN67daEjeMPufCSb+aD3WLzEdoUbNIic@public.gmane.org>
2015-11-19 16:37 ` Doug Anderson
[not found] ` <CAD=FV=WSypaenJcRjhneAkcW=K5J-q-+c7L2=vJj5YAoGaFncw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-19 18:19 ` Felipe Balbi
2015-11-19 19:09 ` John Youn
2015-11-05 2:52 ` [PATCH v2 1/2] usb: dwc2: host: Fix missing device insertions John Youn
2015-11-16 17:44 ` Felipe Balbi
2015-11-16 18:13 ` Doug Anderson
[not found] ` <CAD=FV=U7L-=C5rv+YTQV91kXpieRGA8MpAU+qaXzw_0xYUOXJw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-16 18:22 ` Felipe Balbi
[not found] ` <87vb91ls89.fsf-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-11-16 18:44 ` Doug Anderson
[not found] ` <CAD=FV=XOO1XsHWSgqcvEAPAqhB2Ud5zcydc13k-pJ23L0rTW0Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-16 19:09 ` Felipe Balbi
2015-11-16 19:31 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1511161425540.1938-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2015-11-16 19:46 ` Doug Anderson
2015-11-16 20:26 ` Julius Werner
[not found] ` <CAODwPW-O=ezdEWck1n4358ErK_6O5ksCeGY=KZi==f33_i3B9Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-16 20:38 ` Alan Stern
2015-11-16 20:31 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1511161523290.1938-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2015-11-16 23:14 ` Doug Anderson
2015-11-17 1:53 ` John Youn
2015-11-17 2:37 ` Doug Anderson
2015-11-17 15:40 ` Alan Stern
2015-11-17 16:13 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446582629-30091-2-git-send-email-dianders@chromium.org \
--to=dianders-f7+t8e8rja9g9huczpvpmw@public.gmane.org \
--cc=John.Youn-HKixBCOQz3hWk0Htik3J/w@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=gregory.herrero-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org \
--cc=jwerner-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lyz-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=yousaf.kaukab-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox