From: Liviu Dudau <Liviu.Dudau@arm.com>
To: Russell King <rmk+kernel@arm.linux.org.uk>,
Mark Yao <mark.yao@rock-chips.com>,
Heiko Stuebner <heiko@sntech.de>,
Philipp Zabel <p.zabel@pengutronix.de>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
David Airlie <airlied@linux.ie>, Eric Anholt <eric@anholt.net>
Cc: linux-rockchip <linux-rockchip@lists.infradead.org>,
dri-devel <dri-devel@lists.freedesktop.org>,
LAKML <linux-arm-kernel@lists.infradead.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/2] drm/rockchip: Convert the probe function to the generic drm_of_component_probe()
Date: Mon, 16 Nov 2015 14:44:53 +0000 [thread overview]
Message-ID: <1447685093-26129-3-git-send-email-Liviu.Dudau@arm.com> (raw)
In-Reply-To: <1447685093-26129-1-git-send-email-Liviu.Dudau@arm.com>
Take two: Initial attempt to convert rockchip to drm_of_component_probe()
missed the difference between ports and encoders when using the
compare_of() function. Now that drm_of_component_probe() has been enhanced,
let's try again the conversion.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
---
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 98 ++++++-----------------------
1 file changed, 18 insertions(+), 80 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index f22e1e1..581e98c 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -19,6 +19,7 @@
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
+#include <drm/drm_of.h>
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
@@ -411,36 +412,6 @@ int rockchip_drm_encoder_get_mux_id(struct device_node *node,
}
EXPORT_SYMBOL_GPL(rockchip_drm_encoder_get_mux_id);
-static int compare_of(struct device *dev, void *data)
-{
- struct device_node *np = data;
-
- return dev->of_node == np;
-}
-
-static void rockchip_add_endpoints(struct device *dev,
- struct component_match **match,
- struct device_node *port)
-{
- struct device_node *ep, *remote;
-
- for_each_child_of_node(port, ep) {
- remote = of_graph_get_remote_port_parent(ep);
- if (!remote || !of_device_is_available(remote)) {
- of_node_put(remote);
- continue;
- } else if (!of_device_is_available(remote->parent)) {
- dev_warn(dev, "parent device of %s is not available\n",
- remote->full_name);
- of_node_put(remote);
- continue;
- }
-
- component_match_add(dev, match, compare_of, remote);
- of_node_put(remote);
- }
-}
-
static int rockchip_drm_bind(struct device *dev)
{
struct drm_device *drm;
@@ -481,63 +452,30 @@ static const struct component_master_ops rockchip_drm_ops = {
.unbind = rockchip_drm_unbind,
};
-static int rockchip_drm_platform_probe(struct platform_device *pdev)
+static int compare_port(struct device *dev, void *data)
{
- struct device *dev = &pdev->dev;
- struct component_match *match = NULL;
- struct device_node *np = dev->of_node;
- struct device_node *port;
- int i;
+ struct device_node *np = data;
- if (!np)
- return -ENODEV;
- /*
- * Bind the crtc ports first, so that
- * drm_of_find_possible_crtcs called from encoder .bind callbacks
- * works as expected.
- */
- for (i = 0;; i++) {
- port = of_parse_phandle(np, "ports", i);
- if (!port)
- break;
-
- if (!of_device_is_available(port->parent)) {
- of_node_put(port);
- continue;
- }
+ return dev->parent->of_node == np;
+}
- component_match_add(dev, &match, compare_of, port->parent);
- of_node_put(port);
- }
+static int compare_encoder(struct device *dev, void *data)
+{
+ struct device_node *np = data;
- if (i == 0) {
- dev_err(dev, "missing 'ports' property\n");
- return -ENODEV;
- }
+ return dev->of_node == np;
+}
- if (!match) {
- dev_err(dev, "No available vop found for display-subsystem.\n");
- return -ENODEV;
- }
- /*
- * For each bound crtc, bind the encoders attached to its
- * remote endpoint.
- */
- for (i = 0;; i++) {
- port = of_parse_phandle(np, "ports", i);
- if (!port)
- break;
-
- if (!of_device_is_available(port->parent)) {
- of_node_put(port);
- continue;
- }
+static int rockchip_drm_platform_probe(struct platform_device *pdev)
+{
+ int ret = drm_of_component_probe(&pdev->dev, compare_port,
+ compare_encoder, &rockchip_drm_ops);
- rockchip_add_endpoints(dev, &match, port);
- of_node_put(port);
- }
+ /* keep compatibility with old code that was returning -ENODEV */
+ if (ret == -EINVAL)
+ return -ENODEV;
- return component_master_add_with_match(dev, &rockchip_drm_ops, match);
+ return ret;
}
static int rockchip_drm_platform_remove(struct platform_device *pdev)
--
2.6.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-11-16 14:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-16 14:44 [PATCH 0/2] Improve drm_of_component_probe() and move rockchip to use it Liviu Dudau
2015-11-16 14:44 ` [PATCH 1/2] drm: Improve drm_of_component_probe() to correctly handle ports and remote ports Liviu Dudau
2015-11-16 16:22 ` Russell King - ARM Linux
2015-11-16 16:49 ` Liviu Dudau
2015-11-16 17:22 ` Russell King - ARM Linux
2015-11-16 17:32 ` Daniel Stone
2015-11-16 17:43 ` Russell King - ARM Linux
2015-11-16 17:48 ` Daniel Stone
2015-11-16 17:53 ` Russell King - ARM Linux
[not found] ` <20151116172248.GP8644-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2015-11-16 21:17 ` Liviu Dudau
2015-11-16 22:33 ` Russell King - ARM Linux
2015-11-16 14:44 ` Liviu Dudau [this message]
2015-11-16 16:30 ` [PATCH 2/2] drm/rockchip: Convert the probe function to the generic drm_of_component_probe() Russell King - ARM Linux
2015-11-16 16:52 ` Liviu Dudau
[not found] ` <20151116165206.GC4158-2JSQmVVBSi7ZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2015-11-16 17:01 ` Heiko Stübner
2015-11-16 16:07 ` [PATCH 0/2] Improve drm_of_component_probe() and move rockchip to use it Heiko Stübner
2015-11-16 16:50 ` Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447685093-26129-3-git-send-email-Liviu.Dudau@arm.com \
--to=liviu.dudau@arm.com \
--cc=airlied@linux.ie \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.yao@rock-chips.com \
--cc=p.zabel@pengutronix.de \
--cc=rmk+kernel@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox