From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sjoerd Simons Subject: [PATCH 2/2] ARM: dts: rockchip: Add the SDIO wifi on Radxa Rock2 square Date: Sat, 9 Jan 2016 13:54:18 +0100 Message-ID: <1452344058-27434-3-git-send-email-sjoerd.simons@collabora.co.uk> References: <1452344058-27434-1-git-send-email-sjoerd.simons@collabora.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1452344058-27434-1-git-send-email-sjoerd.simons-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+glpar-linux-rockchip=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: Heiko Stuebner , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: linux-rockchip.vger.kernel.org Enable the sdio0 slot on the Rock2 square which has a broadcom wifi chip attached and add a power sequence to enable the wifi chip and turn on the required 32k clock. Signed-off-by: Sjoerd Simons --- arch/arm/boot/dts/rk3288-rock2-square.dts | 33 ++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 8af35c8..dd53af3 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -63,6 +63,16 @@ #sound-dai-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "xin32k"; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + }; + vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -88,6 +98,21 @@ }; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -112,7 +137,7 @@ }; &i2c0 { - hym8563@51 { + hym8563: hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; @@ -148,6 +173,12 @@ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &spdif { -- 2.7.0.rc3