From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: [PATCH 2/3] ARM: dts: rockchip: make rk3288-grf a simple-mfd Date: Thu, 31 Mar 2016 15:43:31 +0200 Message-ID: <1459431812-6286-3-git-send-email-heiko@sntech.de> References: <1459431812-6286-1-git-send-email-heiko@sntech.de> Return-path: In-Reply-To: <1459431812-6286-1-git-send-email-heiko@sntech.de> Sender: linux-kernel-owner@vger.kernel.org To: kishon@ti.com Cc: linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, Heiko Stuebner List-Id: linux-rockchip.vger.kernel.org Similar to the pmu, the general register files contain a lot of different setting bits grouped into general registers, but also some somewhat special entities like the controls for some phy-blocks or the io-voltage control. To be able to move these blocks under the grf node where they actually belong, make it a simple-mfd. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 31f7e20..bc57232 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -745,7 +745,7 @@ }; grf: syscon@ff770000 { - compatible = "rockchip,rk3288-grf", "syscon"; + compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; reg = <0xff770000 0x1000>; }; -- 2.6.4