From: William Wu <william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
briannorris-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
eddie.cai-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
John.Youn-HKixBCOQz3hWk0Htik3J/w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
William Wu <william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: [PATCH v3 4/5] usb: dwc3: add dis_del_phy_power_chg_quirk
Date: Fri, 27 May 2016 19:28:07 +0800 [thread overview]
Message-ID: <1464348488-20760-5-git-send-email-william.wu@rock-chips.com> (raw)
In-Reply-To: <1464348488-20760-1-git-send-email-william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit,
which specifies whether disable delay PHY power change
from P0 to P1/P2/P3 when link state changing from U0
to U1/U2/U3 respectively.
Signed-off-by: William Wu <william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v3:
- None
Changes in v2:
- None
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
drivers/usb/dwc3/core.c | 7 +++++++
drivers/usb/dwc3/core.h | 3 +++
drivers/usb/dwc3/platform_data.h | 1 +
4 files changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 34d13a5..bd5bef0 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -42,6 +42,8 @@ Optional properties:
- snps,dis_u2_freeclk_exists_quirk: when set, clear the u2_freeclk_exists
in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
a free-running PHY clock.
+ - snps,dis_del_phy_power_chg_quirk: when set core will change PHY power
+ from P0 to P1/P2/P3 without delay.
- snps,phyif_utmi_quirk: when set core will set phyif UTMI+ interface.
- snps,phyif_utmi: the value to configure the core to support a UTMI+ PHY
with an 8- or 16-bit interface. Value 0 select 8-bit
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index d99c170..c06870c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -451,6 +451,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u3_susphy_quirk)
reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+ if (dwc->dis_del_phy_power_chg_quirk)
+ reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -920,6 +923,8 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,dis_rxdet_inp3_quirk");
dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
"snps,dis_u2_freeclk_exists_quirk");
+ dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
+ "snps,dis_del_phy_power_chg_quirk");
dwc->phyif_utmi_quirk = device_property_read_bool(dev,
"snps,phyif_utmi_quirk");
@@ -960,6 +965,8 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->dis_rxdet_inp3_quirk = pdata->dis_rxdet_inp3_quirk;
dwc->dis_u2_freeclk_exists_quirk =
pdata->dis_u2_freeclk_exists_quirk;
+ dwc->dis_del_phy_power_chg_quirk =
+ pdata->dis_del_phy_power_chg_quirk;
dwc->phyif_utmi_quirk = pdata->phyif_utmi_quirk;
if (pdata->phyif_utmi)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index e1fcae8..abed84f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -780,6 +780,8 @@ struct dwc3_scratchpad_array {
* @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
* in GUSB2PHYCFG, specify that USB2 PHY doesn't
* provide a free-running PHY clock.
+ * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
+ * change quirk.
* @phyif_utmi_quirk: set if we enable phyif UTMI+ quirk
* @phyif_utmi: UTMI+ PHY interface value
* 0 - 8 bits
@@ -928,6 +930,7 @@ struct dwc3 {
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;
unsigned phyif_utmi_quirk:1;
unsigned phyif_utmi:1;
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index b521565..ab45d91 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -44,6 +44,7 @@ struct dwc3_platform_data {
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;
unsigned phyif_utmi_quirk:1;
unsigned phyif_utmi:1;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2016-05-27 11:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-27 11:28 [PATCH v3 0/5] support rockchip dwc3 driver William Wu
2016-05-27 11:28 ` [PATCH v3 1/5] usb: dwc3: of-simple: add compatible for rockchip William Wu
2016-05-27 11:28 ` [PATCH v3 3/5] usb: dwc3: add phyif_utmi_quirk William Wu
[not found] ` <1464348488-20760-1-git-send-email-william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-05-27 11:28 ` [PATCH v3 2/5] usb: dwc3: add dis_u2_freeclk_exists_quirk William Wu
2016-05-27 12:54 ` Felipe Balbi
2016-05-27 11:28 ` William Wu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464348488-20760-5-git-send-email-william.wu@rock-chips.com \
--to=william.wu-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=John.Youn-HKixBCOQz3hWk0Htik3J/w@public.gmane.org \
--cc=balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=briannorris-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=eddie.cai-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox