From: Frank Wang <frank.wang@rock-chips.com>
To: heiko@sntech.de, dianders@chromium.org, linux@roeck-us.net,
groeck@chromium.org, jwerner@chromium.org, kishon@ti.com,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-usb@vger.kernel.org, linux-rockchip@lists.infradead.org,
xzy.xu@rock-chips.com, kever.yang@rock-chips.com,
huangtao@rock-chips.com, william.wu@rock-chips.com,
daniel.meng@rock-chips.com, frank.wang@rock-chips.com
Subject: [PATCH v8 3/3] arm64: dts: rockchip: add usb2-phy support for rk3399
Date: Tue, 19 Jul 2016 15:28:31 +0800 [thread overview]
Message-ID: <1468913311-23977-1-git-send-email-frank.wang@rock-chips.com> (raw)
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---
arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 19 +++++++++++
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 47 ++++++++++++++++++++++++++-
2 files changed, 65 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 1a3eb14..31d4828 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -69,6 +69,15 @@
regulator-max-microvolt = <3300000>;
};
+ vbus_host: vbus-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vbus_host";
+ };
+
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_phy";
@@ -93,6 +102,16 @@
status = "okay";
};
+&u2phy0_host {
+ phy-supply = <&vbus_host>;
+ status = "okay";
+};
+
+&u2phy1_host {
+ phy-supply = <&vbus_host>;
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d7f8e06..0383785 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -221,6 +221,8 @@
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
clock-names = "hclk_host0", "hclk_host0_arb";
+ phys = <&u2phy0_host>;
+ phy-names = "u2phy0";
status = "disabled";
};
@@ -239,6 +241,8 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
clock-names = "hclk_host1", "hclk_host1_arb";
+ phys = <&u2phy1_host>;
+ phy-names = "u2phy1";
status = "disabled";
};
@@ -481,8 +485,42 @@
};
grf: syscon@ff770000 {
- compatible = "rockchip,rk3399-grf", "syscon";
+ compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
reg = <0x0 0xff770000 0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy0: usb2-phy@e450 {
+ compatible = "rockchip,rk3399-usb2phy";
+ reg = <0xe450 0x10>;
+ clocks = <&cru SCLK_USB2PHY0_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "clk_usbphy0_480m";
+
+ u2phy0_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+ };
+
+ u2phy1: usb2-phy@e460 {
+ compatible = "rockchip,rk3399-usb2phy";
+ reg = <0xe460 0x10>;
+ clocks = <&cru SCLK_USB2PHY1_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "clk_usbphy1_480m";
+
+ u2phy1_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+ };
};
watchdog@ff840000 {
@@ -1009,5 +1047,12 @@
<1 14 RK_FUNC_1 &pcfg_pull_none>;
};
};
+
+ usb2 {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins =
+ <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
};
--
1.7.9.5
next reply other threads:[~2016-07-19 7:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-19 7:28 Frank Wang [this message]
[not found] ` <1468913311-23977-1-git-send-email-frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-07-20 21:33 ` [PATCH v8 3/3] arm64: dts: rockchip: add usb2-phy support for rk3399 Doug Anderson
2016-07-20 22:06 ` Heiko Stübner
[not found] ` <CAD=FV=Wc0RdgpfzWhEVsrQhj5Pjf4RF3a81mZKaZfpZS41ce5g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-07-21 2:49 ` Frank Wang
2016-07-21 9:26 ` Heiko Stübner
2016-07-21 10:17 ` Frank Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468913311-23977-1-git-send-email-frank.wang@rock-chips.com \
--to=frank.wang@rock-chips.com \
--cc=daniel.meng@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=groeck@chromium.org \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jwerner@chromium.org \
--cc=kever.yang@rock-chips.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=william.wu@rock-chips.com \
--cc=xzy.xu@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox